Design wall - could I make it out of flannel?
#1
Senior Member
Thread Starter
Join Date: Jan 2012
Location: By the beach
Posts: 597
Design wall - could I make it out of flannel?
I have built in bookcases in my sewing room and I want to hang white flannel fabric to cover the bookcases and use as a design wall but I also need to be able to open the "curtains" to access the books, etc. Would flannel be heavy enough to hold the quilt blocks? Do you think I should put weights in the bottom hem to make the flannel hang flatter?
I was thinking just to get two curtain rods to hang the flannel but would something else be better so I could close the two panels together. The width is about 100 inches.
What do you think quilters? Suggestions?
I was thinking just to get two curtain rods to hang the flannel but would something else be better so I could close the two panels together. The width is about 100 inches.
What do you think quilters? Suggestions?
#2
Super Member
Join Date: Aug 2010
Location: Piedmont Virginia in the Foothills of the Blue Ridge Mtns.
Posts: 8,562
Absolutely! Flannel makes a good design wall.
Curtain rods might stand out from the wall a bit, though, which in my opinion, will make it harder to hand press the blocks against the flannel. I like mine against a hard surface....such as like house insulation - foamboard (It's light blue) from Lowe's. These come in 4ft x 8ft. pieces and are very lightweight. I mounted mine horizontally on the wall with lightweight screws. If the wall is a light color -- eggshell/white/buff -- the flannel will likely match it pretty well. I can hardly tell mine is there when there are no scraps or blocks on it.
In your case you might try double stick heavyweight tape and mount directly to the bookcase
Or, having reread your post, you might use ducttape to attach flannel to these foam boards and also to make a hinge of sorts between two panels of them so that you could fold, yet allow them to stand on their own -- like a decorative floor screen would.
Jan in VA
Curtain rods might stand out from the wall a bit, though, which in my opinion, will make it harder to hand press the blocks against the flannel. I like mine against a hard surface....such as like house insulation - foamboard (It's light blue) from Lowe's. These come in 4ft x 8ft. pieces and are very lightweight. I mounted mine horizontally on the wall with lightweight screws. If the wall is a light color -- eggshell/white/buff -- the flannel will likely match it pretty well. I can hardly tell mine is there when there are no scraps or blocks on it.
In your case you might try double stick heavyweight tape and mount directly to the bookcase
Or, having reread your post, you might use ducttape to attach flannel to these foam boards and also to make a hinge of sorts between two panels of them so that you could fold, yet allow them to stand on their own -- like a decorative floor screen would.
Jan in VA
Last edited by Jan in VA; 05-01-2013 at 11:23 AM.
#3
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,538
I have a flannel backed tablecloth that I use as my design wall. The blocks stick better with a solid surface behind the flannel because you have something to press them against as you smooth them on. If you weighted the bottom with another curtain rod it might put enough tension on the flannel for smoothing the blocks on?
#4
I use a flannel backed tablecloth and hang it from my wire shelving with the hangers with the clips on them. I can take it down when I don't need to use it. Very portable and easy to store when not in use.
[ATTACH=CONFIG]411185[/ATTACH][ATTACH=CONFIG]411186[/ATTACH]
[ATTACH=CONFIG]411185[/ATTACH][ATTACH=CONFIG]411186[/ATTACH]
#5
I used curtainrods to hang my design wall. I have a rod at the top & one at the bottom to weight it down. I need to be able to take it down (like now when we are trying to sell our house!) & it works out great. I used flannel too.
#6
Super Member
Join Date: Mar 2012
Location: Thornton, Colorado
Posts: 1,023
I have a lovely design wall at one end of the room...3 light blue insulation boards nailed to the wall and covered with backing flannel, 6 by 8 feet wide. However, one design wall is not always enough, lol. I made a folding screen with three panels cut down some. I taped two boards together on one side and the second seam was taped from the other side, so the screeen could be folded like an accordian when not in use. I covered this one with an old queensized flannel bed sheet. Didn't cost much. The beauty is that you can make it any size you want.
#7
Junior Member
Join Date: Jul 2011
Posts: 210
My design wall is composed on two tablecloths that have flannel backs sewn together, hung (hooks nailed into top of wall) on a 110 inch hollow conduit pipe (light weight metal) complete with pool noodles on the bottom (created pocket on bottom for easy in and out) so that I can roll it and take it with me. Grand total for cost? $15
Thread
Thread Starter
Forum
Replies
Last Post
Radiana
General Chit-Chat (non-quilting talk)
8
12-12-2012 08:17 PM
craftybear
Links and Resources
6
08-22-2011 05:12 PM
craftybear
Main
35
05-20-2011 01:45 PM