Rotary Cutter skips.
#21
sobaboo; I find my cutters work best on at least 4 layers of fabric, rather than 1 or 2. I believe that was what they were designed for, way back in the dark ages of quilting. Cutting tracks on an older the mat can also cause skipping; flip it over and use the second, smoother side. Use your ruler for measuring strips and squares, not the grid on the mat. I use the mat grid strictly for squaring/straightening a length of yardage. Hope this helps you :-) :-)
#22
Stand over the fabric you're cutting. Get a firm grip on your rotary cutter - but don't white knuckle it. Give it firm pressure but don't press so hard you're making it "stall out" - roll - think roll like a rolling pin. lean ever so slightly the top towards the ruler so it doesn't go off to the side and take your time. No need to speed here. It takes time to get the hang of it, but never be in a hurry when cutting strips. Also, do check that it doesn't have two blades on - very carefully. (Try a magnifying glass - if it does use a tool to separate them - not fingers. Careful not to nick it.
#23
Yep check the blade for, chips, could have been dropped or running over a pin, (how would I know that) also grooves in the cutting board. Practice made a big difference tho.
One more thing, when I learned, left the part I was cutting off exposed, so could softly scoot it over to see if all was cut, without letting up on the guide, but the grid was straight, can cut both ways now with guide over the strip I'm keeping.
Don't think I've ever cut me tho ;) did cut the phone cord in half the other day :(..... Woops :)
One more thing, when I learned, left the part I was cutting off exposed, so could softly scoot it over to see if all was cut, without letting up on the guide, but the grid was straight, can cut both ways now with guide over the strip I'm keeping.
Don't think I've ever cut me tho ;) did cut the phone cord in half the other day :(..... Woops :)
#26
Does your cutting mat have bad places in it? Mine did! So bought a new one at Joann's 50% off sale...
Also, bought the blade sharpener from Harbor Freight Co. so my blades will always be sharp now...
I'm a scairdy cat, too. Be careful when cutting... Hugs...
Also, bought the blade sharpener from Harbor Freight Co. so my blades will always be sharp now...
I'm a scairdy cat, too. Be careful when cutting... Hugs...
#27
Make sure too, that you are holding the cutter/blade straight up. If you slant it to the left or right, you can cut "into" the ruler instead of riding right up next to it. That can make uneven/inaccurate cuts, and knick your blade so that it makes skipped cuts like you are describing :D:D:D
#30
Originally Posted by BrendaY
Does your cutting mat have bad places in it? Mine did! So bought a new one at Joann's 50% off sale...
Also, bought the blade sharpener from Harbor Freight Co. so my blades will always be sharp now...
I'm a scairdy cat, too. Be careful when cutting... Hugs...
Also, bought the blade sharpener from Harbor Freight Co. so my blades will always be sharp now...
I'm a scairdy cat, too. Be careful when cutting... Hugs...
Thread
Thread Starter
Forum
Replies
Last Post
Freaky_Quilts_Dragon
For Vintage & Antique Machine Enthusiasts
3
05-13-2016 10:11 AM
SuzieQuilts
Main
5
04-02-2012 05:40 AM