Go Back  Quiltingboard Forums >
  • Main
  • Supreme Slider alternative >
  • Supreme Slider alternative

  • Supreme Slider alternative

    Thread Tools
     
    Old 12-03-2012, 09:33 AM
      #1  
    Super Member
    Thread Starter
     
    Join Date: Oct 2011
    Location: Timmins, Ont. Canada
    Posts: 4,683
    Thumbs up Supreme Slider alternative

    The members here on the QB are so inventive & clever that I was hoping someone has come up with an alternate material that could be as good as the Supreme Slider. I just find it so expensive (here in Canada it runs about $35.00-40.00 for the regular size) & the queen is even more pricey. Does anyone have any ideas as to what I could use instead of the Supreme Slider. Any & all suggestions would be very much appreciated. Tks to everyone.
    callen is offline  
    Old 12-03-2012, 09:50 AM
      #2  
    Senior Member
     
    Join Date: Nov 2010
    Location: North Carolina
    Posts: 865
    Default

    I cut up an old clear vinyl shower curtain and taped it to the top of my sewing table. Works like a charm. I had a slider, but sewed it to my quilt one too many times. Don't think it's necessary any more.
    wishfulthinking is offline  
    Old 12-03-2012, 09:50 AM
      #3  
    Power Poster
     
    BellaBoo's Avatar
     
    Join Date: Jan 2009
    Location: Front row
    Posts: 14,646
    Default

    I haven't found anything that works as good for me and I tried every item mentioned as works as good. I had to tape the alternatives down very firmly so it wouldn't move. I spent half the amount of the cost of one trying out different just as good things. LOL. The Slider stays in place and a rinse under the faucet makes it as good as new. I've had mine for many years so the cost has averaged out to a couple dollars a year to own. Do I need it? No, but it works great and has kept my sewing extension table looking like new, no scratches.
    BellaBoo is offline  
    Old 12-03-2012, 09:55 AM
      #4  
    Super Member
     
    LynnVT's Avatar
     
    Join Date: Jan 2012
    Location: Vermont, USA
    Posts: 1,346
    Default

    I just don't see the point. My machine is slippery plastic anyway. How much better can this make it?
    LynnVT is offline  
    Old 12-03-2012, 10:33 AM
      #5  
    Power Poster
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 11,276
    Default

    Go to the cooking department and see if they carry teflon oven liner. They are made to put on the bottom of your oven to keep spills from baking on. Here they are about $10 american. Cut a hole for the needle and you may need to use a bit of tape to keep it in place.
    PaperPrincess is offline  
    Old 12-03-2012, 10:38 AM
      #6  
    Senior Member
     
    Mom3's Avatar
     
    Join Date: Jan 2012
    Location: suburb of Milwaukee, WI
    Posts: 651
    Default

    Do you know what Contact Paper is? (This is a shelf liner.) Take off the shelf liner, save the paper backing. Discard the shelf liner. Take the paper backing and tape it shiny side 'up' to your machine bed/sewing table & cut a little hole for your needle. It is as slick as a baby's bottom!
    Mom3 is offline  
    Old 12-03-2012, 10:42 AM
      #7  
    Senior Member
     
    luana's Avatar
     
    Join Date: Feb 2011
    Location: iowa
    Posts: 663
    Default

    Originally Posted by PaperPrincess
    Go to the cooking department and see if they carry teflon oven liner. They are made to put on the bottom of your oven to keep spills from baking on. Here they are about $10 american. Cut a hole for the needle and you may need to use a bit of tape to keep it in place.
    I tried the teflon oven liner and the problem I encounerted was that I coundn't keep it in place. Tape would not stick to the teflon. I'm with BellaBoo on this one, I've wasted more money trying to find an alternative than buying the slider in the first place.
    luana is offline  
    Old 12-03-2012, 10:49 AM
      #8  
    Super Member
     
    Join Date: Jun 2010
    Location: England Alton Towers
    Posts: 6,673
    Default

    The other day I cleaned an old machine plastic with brasso . The surface is now very smooth and slippery. Try it in a small area.
    DOTTYMO is offline  
    Old 12-03-2012, 11:12 AM
      #9  
    Power Poster
     
    BellaBoo's Avatar
     
    Join Date: Jan 2009
    Location: Front row
    Posts: 14,646
    Default

    Be careful using any chemical product on plastic or acrylic or pexiglass. Over time it will become brittle and crack.
    BellaBoo is offline  
    Old 12-03-2012, 11:17 AM
      #10  
    Super Member
     
    Join Date: Aug 2010
    Location: My Sewing Room
    Posts: 1,180
    Default

    I have used a teflon sheet, intended for ironing to keep sticky stuff off your iron when doing fusible projects. I attached it to the bed of my Singer 15-91 with painter's tape. It really helped the quilt slide, but it isn't a perfect solution since the tape has to be reapplied frequently. I have some gorilla tape, but hesitate to use it on my machine. I have since mounted that 15-91 into a cabinet, so I may be in the market for a supreme slider or equivalent myself.
    jlm5419 is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    sewsewquilter
    Main
    15
    11-02-2012 07:34 PM
    Dar-midlife
    Main
    23
    10-18-2011 05:51 PM
    quiltinghere
    Main
    15
    07-23-2010 10:47 AM
    borntoquilt
    Main
    13
    02-07-2009 08:38 PM
    DebJ
    Main
    15
    06-19-2008 07:20 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter