Is this thread safe to use for a toddler's twin sized bed quilt?
#11
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,558
I have ironed MonoPoly many, many times on the hottest setting with absolutely no issues. I believe you're thinking of nylon thread, which will melt.
#12
Super Member
Thread Starter
Join Date: Jan 2012
Posts: 3,354
Thanks for all of your comments and sage advice. Regarding my question about safety, sorry for the confusion. I was concerned that the thread might wrap itself around a child's finger more easily than your typical cotton thread. I remember reading on this blog that nylon threads should not be used in baby quilts so little fingers could not be trapped and wrapped or entangled with the thread. Thank you again.
#13
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,558
I honestly don't think nylon threads are any more likely than any other thread (or for that matter, any other textile, such as sleeper jammies or onesies) to come undone and get wrapped around a finger.
#14
Super Member
Join Date: Aug 2009
Location: Illinois
Posts: 1,821
I've used invisible thread on a lot of quilts for kids. All have held up well and none of the kids have lost fingers/toes. When gifting any of my quilts, I remind the moms that, if they find loose threads, to clip them off in case I've missed any.
#15
I use Superior Poly Invisible Thread a lot on my table runners. I also use it in my bobbin. I have ironed with a hot iron and have never had it melt. I wind the bobbin very slowly and have no problems using it both in the top thread and bobbin thread. My needle threader does not work, like Rhonda K says, but I just hand thread the needle like she does. I love this thread. I use 2 colors - I use the darker one on darker fabrics and the clear or lighter one on light fabrics. If I have both light and dark fabrics, I have found that the clear works best.
#17
Super Member
Join Date: Oct 2008
Location: The Finger Lakes of upstate NY
Posts: 3,567
Maybe the finger/safety concern is bc if thinking it does not break as cotton would, combined with safety cautions over babies getting little fingers or toes wrapped in loose threads. I've seen recommendations that if you can't determine the reason for a baby crying, to check their fingers and toes for tight threads. It seems that if a baby or child is crying with pain, you'd be checking from top to bottom, but I guess not everyone does/has, so they've put this warning out. I wouldn't be any more concerned over it happening with poly than with any other thread.
If you're fiddling with a loose thread on a comforter, would the fiber content of that thread make any difference? It's just hanging there, so gets twirled. Some people do that with their hair.
If you're fiddling with a loose thread on a comforter, would the fiber content of that thread make any difference? It's just hanging there, so gets twirled. Some people do that with their hair.
#18
Super Member
Join Date: Mar 2016
Posts: 2,889
Question: What's the difference in polyester clear thread and polyester colored thread? We hear the things about the missing fingers and toes when clear thread is discussed, but it never seems to come up when colored thread is discussed.
bkay
bkay
#19
Super Member
Join Date: Dec 2012
Posts: 1,857
No. I would not risk it. The reason being is that it is strong. As with nylon thread, it does not like to break. If a thread comes loose, it will unravel but stay intact. So it can become a little noose for toes or fingers and if caught in it, it can cut off circulation. I would use it on many other projects, just not anything involving a child.
Last edited by QuiltnNan; 09-20-2019 at 06:48 AM. Reason: shouting/all caps
Thread
Thread Starter
Forum
Replies
Last Post