A very easy way to make ruffles.....
11-02-2012, 03:27 AM
#31
Super Member
Join Date: Jul 2010
Location: Glenmoore, PA
Posts: 7,941
As an apparel sewer for over 60 years, this is what I did. I used buttonhole thread. After you pulled out the thread, you could even use it over again. I guess new quilters don't realize how many ideas from apparel sewing can be used on quilting. I also love the narrow hem produced by the serger.
11-02-2012, 04:44 AM
#33
Senior Member
Join Date: Jun 2011
Posts: 976
One way to gather is to have a long bobbin thread when starting. Needs to be the same length or longer as the fabric length you are ruffling. Bring that bobbin thread up over the top of the fabric and lay it the length of the fabric toward the direction you are sewing. Put down the presser foot. Using a loose zig zag stitch (adjust your stitch length-I use a 2) and a width of 4-6, sew over the bobbin thread. Leave a long bobbin thread tail at the end. Pull the bobbin thread and gather up the fabric. Done!
11-02-2012, 06:37 AM
#34
Super Member
Join Date: Jun 2010
Location: Bay Area near San Francisco
Posts: 1,213
I saw this method demonstrated on YouTube, sorry to say I lost the link. However it is so simple and effective I thought to pass it on. Here it is, set your tension to #8 and stitch length to #5. If you cannot do either of these things then this won't work for you. However once things are set just sew along the edge. Do not back stitch and be sure to leave at least 4inch thread tales on either end. The gathers are easily then adjusted as needed.
If you want, you can zig-zag two pieces of crochet thread on the fabric to give you a wider "flat" area to work with along the gathered edge.
11-02-2012, 08:54 AM
#35
Member
Join Date: Oct 2012
Location: Helena, MT
Posts: 4
I agree with irishrose. I still remember my hom-ec teacher teaching us to use 3 rows of basting stitches for gathering. With this method there are no unwanted little tucks from the fabric below the gathering threads slipping into the gather. I've used my ruffler for some garments, but never quite as happy with the results. I'm sewing for two little granddaughters now and I'll only use the old method for their clothes. I'm not at 60 years of sewing experience, but getting closer every day! (42 years of experience)
11-02-2012, 06:18 PM
#36
Senior Member
Join Date: May 2010
Posts: 466
I saw this method demonstrated on YouTube, sorry to say I lost the link. However it is so simple and effective I thought to pass it on. Here it is, set your tension to #8 and stitch length to #5. If you cannot do either of these things then this won't work for you. However once things are set just sew along the edge. Do not back stitch and be sure to leave at least 4inch thread tales on either end. The gathers are easily then adjusted as needed. I recently needed to add ruffles to a curved hem on aprons, this worked great. I just pinned at the center and ends of the seam and adjusted the ruffles as I pinned along the perimeter. Of course this is basically a basting stitch so you do need to over sew the gathers with a regular stitch length and tension. I have a ruffling-foot and a gathering foot but I found this a very easy solution to how to get the gathers to fit in the seam you are trying to match it with. If anyone has a link to the You Tube video on the gathering technique please post it so they can get credit for this idea.
Another tip I found helpful is if you have a serger and can do a rolled hem stitch, then I just finish the bottom edge rather than hem it. I use all four threads, widest seam width setting and a short stitch setting. Then I get out some bright variegated serger threads and finish off the bottom edge this way. It adds a pop of color, and gives the edge a clean hemmed finish. It adds a decorative edge to the ruffle. It is also a great and easy way to do a quick finish to kitchen towels and wash cloths.
Another tip I found helpful is if you have a serger and can do a rolled hem stitch, then I just finish the bottom edge rather than hem it. I use all four threads, widest seam width setting and a short stitch setting. Then I get out some bright variegated serger threads and finish off the bottom edge this way. It adds a pop of color, and gives the edge a clean hemmed finish. It adds a decorative edge to the ruffle. It is also a great and easy way to do a quick finish to kitchen towels and wash cloths.
11-02-2012, 07:09 PM
#37
Super Member
Join Date: Aug 2009
Location: Quilting somewhere......
Posts: 2,591
I will have to try to change the tension next time I need ruffles. I was taught to do the double rows of basting way back in jr. high. I also have done the zig-zag over thick thread also. I hate to ruffle and any way to do it easier, I am all for it!!
11-05-2012, 06:41 AM
#38
Senior Member
Thread Starter
Join Date: Aug 2010
Posts: 811
Additional information on this simple way to make ruffles.
I guess the point of this I did not make clear is that this method does not just lay down a basting thread but actally makes the gathers as well. The higher the tension setting the tighter the gathers. An 8 setting is a denser gather than a 7 or a 6. The advantage is that if your ruffle is a bit short or long you can easily adjust with out much effort. Unlike just laying a down a basting line you do not have to do a lot of pulling on threads. Just try it and you might become a convert to this method. I wish I still had the link to the video as she does such a clear job of explaining and it is so easy her daughter does the demonstration.
Thread
Thread Starter
Forum
Replies
Last Post
Sue Fish
General Chit-Chat (non-quilting talk)
18
12-20-2010 03:25 PM
