Quiltingboard Forums
Page 4 of 5
« First
2
3
4
5
Show 40 post(s) from this thread on one page

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Pictures (https://www.quiltingboard.com/pictures-f5/)
-   -   Flower stitch foot (https://www.quiltingboard.com/pictures-f5/flower-stitch-foot-t134126.html)

jaciqltznok 06-30-2011 09:01 AM
3 Attachment(s)
Originally Posted by Matilda
Here is a link for more pictures. These are neat!
http://www.google.com/search?q=flowe...ls=org.mozilla:en-US:official&prmd=ivns&tbm=isch&tbo=u&source=univ&s a=X&ei=g5oMTpv2IuSfsQLkj7TxCQ&ved=0CFAQsAQ&biw=124 3&bih=680

I will have to check into this foot. Thanks Jacquie for sharing this.
I never thought to google just the images...way cool!
I can see that some go over the flower more than once...neat effect..there are tons of possiblities with this..just in changing your threads!

I must find time to sit back down and PLAY....it is time consuming..but it is for the GOOD of quilterkind every where!

this is My foot exactly!
[ATTACH=CONFIG]218995[/ATTACH]

This is more what I would like to make..the far right AND the one right under the foot!
[ATTACH=CONFIG]218996[/ATTACH]

flower stitch foot with direction sheet
[ATTACH=CONFIG]219001[/ATTACH]

stephanie 06-30-2011 09:30 AM
Have you tried stretching the fabric in a small embroidery hoop, if the attachment will fit into it.

jaciqltznok 06-30-2011 09:32 AM
Originally Posted by stephanie
Have you tried stretching the fabric in a small embroidery hoop, if the attachment will fit into it.
it would take a fairly large hoop...that foot is big!
but hooping is on my list of things to try...

brightstar_202 06-30-2011 10:07 AM
I had that problem when I emb. but if you use a lite wt. stabelizer and put the thread through the eye of the bobbin it should work fine. Have you tried that yeet?

brightstar_202 06-30-2011 10:07 AM
I had that problem when I emb. but if you use a lite wt. stabelizer and put the thread through the eye of the bobbin it should work fine. Have you tried that yet?

jaciqltznok 06-30-2011 10:28 AM
Originally Posted by brightstar_202
I had that problem when I emb. but if you use a lite wt. stabelizer and put the thread through the eye of the bobbin it should work fine. Have you tried that yet?
No, I have not, but I am gathering a list of things to try, and experiment with!

IBQUILTIN 06-30-2011 05:06 PM
The best stabilizer I have found for this sort of thing is coffee filters, and they are not expensive

Dee 06-30-2011 05:52 PM
Thank you a zillion times. I bought this 5 years and could never figure it out. Thanks for sharing all the sights. It came with no instructions at all. More I learned tonite on this wonderful board.

jaciqltznok 06-30-2011 05:53 PM
Originally Posted by Dee
Thank you a zillion times. I bought this 5 years and could never figure it out. Thanks for sharing all the sights. It came with no instructions at all. More I learned tonite on this wonderful board.
great..another team player...could you share some of YOUR doodlings when you play with it???

I am going to try some things tomorrow..though DH will be home for a 4 day weekend..ugh....

Dee 06-30-2011 06:16 PM
Will do. I thought I was dense when I couldn't get nothing to work with it. Good Luck to you.


All times are GMT -8. The time now is 04:43 AM.
Page 4 of 5
« First
2
3
4
5
Show 40 post(s) from this thread on one page