![]() |
Question About Putting Together A Coin Quilt
Okay--let's see if I can explain this clearly. :)
I am making a stacked coin quilt of flannel. The coins will finish at 4x10" and will have sashing between each of the five columns. The columns will be 18 coins each. I'm a bit concerned about the possible stretching that might result from sewing all 18 coins together before sashing (a few of the flannels are thicker than others and the resultant weight of the columns might cause them to go wonky in that long a strip). My idea is this: sew 6 coins together and sash the side of that piece, then sew 6 more for the second column, sash, and work horizontally across the quilt. I would then have the top third of the quilt together. Repeat for the middle third, then the final third. Finally, attach these together to form the complete quilt. Am I missing something that would make this unworkable? It seems to work in my head, but I'm afraid I'm missing something that would create a problem. Any thoughts, ideas, or suggestions would be great. |
I would think it would work. That way the sashing is locking the coins together. And your less likely to get an wiggle from the longer sashing. I say go for it.
|
Yes, another vote to go for it. That's the way I'd do it to avoid a long wonky sashing strip.
|
Sounds like a great idea.
|
That would certainly work if you don't mind having horizontal seams in your sashing columns. They'd drive me nuts, however, so I'd probably just stay stitch both edges of each 6 coin unit, sew the three units together, and then add the sashing in one long strip. The stay stitching will keep the coins from stretching and the sashing will remain seam free. No one will ever know the difference. :)
|
I used a light interfacing as a base and stitched alternate left to right/ right to left-- I acknowledge flannel would move more that the cotton I was working with
|
Thanks, everyone--I'll continue to mull this over.
|
Originally Posted by AngeliaNR
(Post 6867021)
Okay--let's see if I can explain this clearly. :)
I am making a stacked coin quilt of flannel. The coins will finish at 4x10" and will have sashing between each of the five columns. The columns will be 18 coins each. I'm a bit concerned about the possible stretching that might result from sewing all 18 coins together before sashing (a few of the flannels are thicker than others and the resultant weight of the columns might cause them to go wonky in that long a strip). My idea is this: sew 6 coins together and sash the side of that piece, then sew 6 more for the second column, sash, and work horizontally across the quilt. I would then have the top third of the quilt together. Repeat for the middle third, then the final third. Finally, attach these together to form the complete quilt. Am I missing something that would make this unworkable? It seems to work in my head, but I'm afraid I'm missing something that would create a problem. Any thoughts, ideas, or suggestions would be great. |
When I am questioning something I am designing in my head, start laying the blocks out and see if it is workable.
|
I would make it that way too. I believe you would have much better results, I know I have done it that way in the past.
|
| All times are GMT -8. The time now is 11:15 PM. |