Go Back  Quiltingboard Forums >
  • Main
  • Midarm Quilter or upgrade to Janome 9900/12000 >
  • Midarm Quilter or upgrade to Janome 9900/12000

  • Midarm Quilter or upgrade to Janome 9900/12000

    Old 10-03-2015, 06:00 PM
      #1  
    Member
    Thread Starter
     
    Join Date: Apr 2012
    Location: Washington, DC
    Posts: 62
    Default Midarm Quilter or upgrade to Janome 9900/12000

    I've finally saved up my money to get a new sewing toy. I use and love a Janome 6600, and I've been thinking of upgrading it to something that 1) has a bit larger 11" throat space and 2) has a free arm. I've been dreaming of the Janome 9900 or 12000. I don't do machine embroidery usually, but it might be fun to expand my skills! I like being in my sewing room.

    But the biggest thing is the throat space. I am constantly wrestling with big quilts, so I've been thinking maybe I should keep the 6600 and spend my hard-earned money on a sit-down mid arm quilter like an APQS George.

    Thoughts or advice?
    Writergrrl is offline  
    Old 10-04-2015, 03:50 AM
      #2  
    Super Member
     
    Join Date: Jan 2010
    Location: West Coast
    Posts: 9,267
    Default

    your 6600 is such a wonderful machine, I wouldn't trade it away (because I love mine). If you have the room, an additional machine dedicated to quilting is not a bad idea, unless of course you really think you might get into the embroidery aspect of things. I don't think the extra couple of inches of throat space will decrease you quilting difficulties.

    Consider this opinion as completely biased ;-)
    DebraK is offline  
    Old 10-04-2015, 04:13 AM
      #3  
    Super Member
     
    Belfrybat's Avatar
     
    Join Date: Oct 2012
    Location: West Central Texas
    Posts: 2,586
    Default

    I have the Brother 1500s with a 9" throat and a Janome 8900 with a 11" throat. I really don't notice much difference between the two. I ended up buying a 15" Bailey Home Quilter on a frame, and even though moving to quilting on a frame is a steep learning curve, the 15" throat really does make a huge difference. So, for what it's worth, if you can afford a 14 - 15" machine on a table, I think you'll like it. That being said, you'll have to pry both the Brother and Janome out of my dead cold hands.
    Belfrybat is offline  
    Old 10-04-2015, 05:37 AM
      #4  
    Senior Member
     
    Join Date: Jul 2010
    Posts: 321
    Default

    I'm with DebraK - I love, love, love my 6600!! I have quilted queen and king quilts on the 6600, and the free arm isn't a concern. (I do have an old machine with a free arm, which I use about once every year or so.)

    I also love embroidery, so I have a Janome 350e embroidery-only machine. It has been great, but I'm getting ready to upgrade to the new 500e. I made the decision to have an embroidery-only machine because it allows me to embroider and sew at the same time. I have never regretted that decision.
    WandaVA is offline  
    Old 10-04-2015, 06:06 AM
      #5  
    Power Poster
     
    Annaquilts's Avatar
     
    Join Date: Jul 2010
    Location: SoCal
    Posts: 11,917
    Default

    Why not make the jump to a long arm? I have a Janome 6500 and coped with the same problem. I went to a Innova 26 inch on a 12 foot frame. I still do small quilts on the Janome 6500. Be Sure whatever you go to has a large enough throat opening and large enough frame. A fame is also nice in that you do not have to cope with basting the quilt.
    Annaquilts is offline  
    Old 10-04-2015, 03:59 PM
      #6  
    Power Poster
     
    Join Date: Jun 2011
    Location: Southern California
    Posts: 19,127
    Default

    Support for the quilt is the most important thing when doing any quilting. I just haven't seen a table big enough to give any support with these sit down machines.
    ManiacQuilter2 is offline  
    Old 10-04-2015, 04:11 PM
      #7  
    Super Member
     
    Join Date: Apr 2007
    Location: Alturas, CA
    Posts: 9,393
    Default

    Why not investigate the 22" Bailey, you can get it about $2500 cheaper and it has a good reputation.
    pocoellie is offline  
    Old 10-04-2015, 05:27 PM
      #8  
    Senior Member
     
    Join Date: Jul 2010
    Location: Lubbock, TX
    Posts: 376
    Default

    I have the Babylock Tiara II midarm. If your biggest struggle is with quilting, and the choice is between a sewing machine with a bigger harp space or a midarm, I'd defiantly go with the midarm. I have a large harp on my Bernina 780 but the thought of quilting anything larger than a crib quilt makes me cringe.
    ClairVoyantQuilter is offline  
    Old 10-04-2015, 06:05 PM
      #9  
    Senior Member
     
    Join Date: Oct 2009
    Location: Richmond, KY
    Posts: 742
    Default

    Check out the BlockRockIt at Kathyquilts.com I have it and really like it. Support is great and the price was just right!
    Ginaky is offline  
    Old 10-04-2015, 07:06 PM
      #10  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    Originally Posted by ManiacQuilter2
    Support for the quilt is the most important thing when doing any quilting. I just haven't seen a table big enough to give any support with these sit down machines.
    The Jennoop suspension system works well for sit-down machines. Some quilters make their own out of PVC. Here is a video: https://www.youtube.com/watch?v=gJGph8am6BE
    Prism99 is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    PeggyFinney
    Main
    3
    02-12-2014 05:47 PM
    GrandmaJeanne
    Main
    15
    12-03-2013 04:13 PM
    nana2madmax
    Main
    3
    11-26-2013 05:34 PM
    Boonedox
    Main
    18
    11-05-2013 04:35 PM
    mamatobugboo
    Main
    22
    11-16-2008 04:55 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter