Go Back  Quiltingboard Forums >
  • Main
  • How to stop bleeding fabric >
  • How to stop bleeding fabric

  • How to stop bleeding fabric

    Old 03-14-2018, 04:08 PM
      #1  
    Senior Member
    Thread Starter
     
    Join Date: Jul 2010
    Location: Westcliffe, CO
    Posts: 793
    Default How to stop bleeding fabric

    I am in the middle of making a quilt and found out several of my fabrics are bleeding. No, I did not prewash, never have. I have heard of a product called retane (not sure how to spell). Have any of you used it and do you like the product, does it work. Any suggestions on subject would be greatly appreciated!
    Dreaming is offline  
    Old 03-14-2018, 04:56 PM
      #2  
    Power Poster
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 11,276
    Default

    you would use Retayne on the uncut fabric to set the dye. you wouldn't want to use it in a pieced item as it would set the dye that bled into adjoining fabrics. At this point, since you are already piecing, I would complete the quilt and wash it with Synthrapol, which keeps the dye in suspension so it can be rinsed away. Both chemicals are available from Dharma Trading , Amazon and others. You can also try color catchers.
    PaperPrincess is offline  
    Old 03-14-2018, 06:05 PM
      #3  
    Super Member
     
    Join Date: May 2011
    Location: Pacific NW
    Posts: 9,444
    Default

    IMO, Retayne is a waste of money. Dawn works a little bit better and is much more affordable.

    This link should help. It's VERY informative!

    https://www.colorwaysbyvicki.com/sav...ing-quilt.html
    Peckish is offline  
    Old 03-14-2018, 06:40 PM
      #4  
    Banned
     
    Join Date: Aug 2014
    Location: Victorian Sweatshop Forum
    Posts: 4,096
    Default

    I've always had good results using Retayne.

    Cari
    Cari-in-Oly is offline  
    Old 03-14-2018, 07:00 PM
      #5  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    You should not use Retayne once a fabric is in a quilt and bleeding. It could permanently set the bleed. Retayne should only be used on fabric yardage, although you could use it on multiple fabrics of similar color.

    PaperPrincess is right. Wait until the quilt is finished, then wash with Synthrapol *using lots of water*. Domestic front-loaders do not use enough water to dilute dye bleeds. You can use a domestic top-loader if you can use enough water to dilute any dye bleeds. If the top-loader has a central agitator, you need to turn off the machine and hand-agitate as central agitators are hard on quilts. I take my quilts to a laundromat and use a large front-loader, and I routinely use Synthrapol in that first wash just in case there are any dye bleeds. Synthrapol suspends loose dye particles in the water so they are rinsed away and don't have a chance to settle into other fabrics.

    If you Google, you will find that many people have done tests that show Dawn is as effective as Synthrapol. Just be careful, whichever one you use, to not use too much. Both can create a lot of suds (which, incidentally, will void the warrant on a domestic HE front-loader).
    Prism99 is offline  
    Old 03-14-2018, 08:41 PM
      #6  
    Super Member
     
    Dolphyngyrl's Avatar
     
    Join Date: Jan 2009
    Location: Southern California
    Posts: 6,254
    Default

    Syntrapol or color catchers
    Dolphyngyrl is offline  
    Old 03-15-2018, 03:39 AM
      #7  
    Super Member
     
    Join Date: Feb 2011
    Location: Yorkville, IL
    Posts: 7,639
    Default

    I only had one fabric that bled and Color Catchers by Tide worked for me!
    luvstoquilt is offline  
    Old 03-15-2018, 11:01 AM
      #8  
    Power Poster
     
    Join Date: May 2008
    Location: MN
    Posts: 24,476
    Default

    how did you notice some of your fabrics are bleeding?
    bearisgray is online now  
    Old 03-15-2018, 11:03 AM
      #9  
    Power Poster
     
    Join Date: Jan 2011
    Location: Southern USA
    Posts: 16,073
    Default

    Originally Posted by bearisgray
    how did you notice some of your fabrics are bleeding?
    Probably when pressing using steam or starch. And dry fabric can crock onto another fabric.
    Onebyone is offline  
    Old 03-15-2018, 03:58 PM
      #10  
    Super Member
     
    Join Date: Oct 2010
    Location: Maple City, MI
    Posts: 2,135
    Default

    I use and love color catchers! If the fabric is red...I wash it first with color catcher until it doesn't bleed. If I use other colors...I wash the newly finished quilt with color catcher...works great for me!
    rusty quilter is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    bearisgray
    Main
    32
    08-14-2016 07:05 AM
    bearisgray
    Main
    33
    07-29-2015 09:40 AM
    MargeD
    Main
    13
    09-21-2011 04:47 AM
    quiltflower
    Main
    52
    05-28-2011 06:18 PM
    lisalisa
    General Chit-Chat (non-quilting talk)
    54
    02-19-2011 11:01 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter