Juki 2010 vs class 15 clone for FMQ
01-02-2020, 10:11 AM
#1
Member
Thread Starter
Join Date: Oct 2017
Posts: 29
Juki 2010 vs class 15 clone for FMQ
Hi all! I am giving serious consideration to purchasing a Juki 2010 for FMQ and maybe walking foot quilting as well. This will give me a larger throat space in a primarily mechanical machine, coupled with the perfect electronic features of needle up/down, speed control and auto cutter. However, I own a class 15 clone and the repair guy has shown me how to set it up for free motion - using the regular foot (which is all I have.) This is a good machine, but the throat space is smaller than the Juki and it lacks the electronic features, of course. I use this clone as my backup machine when my little Bernina is in the shop. I would appreciate any pros and cons on using the Juki or the clone for quilting. Thanks!
01-02-2020, 11:10 AM
#2
Super Member
Join Date: Jan 2011
Location: TN
Posts: 1,443
The deal breaker for me would be the hook system. The Juki is a semi-industrial with a rotary hook system, what that means is the hook spins in one direction and can spin very fast giving you the high sewing speeds. A class 15 is an oscillating hook, what that means is the hook moves back and forth like a pendulum on a clock and is not nearly as fast as a rotary hook machine. Both systems work, and both have their fans, but for me a rotary hook system works more reliably and is practically jam proof.
01-02-2020, 11:10 AM
#3
Senior Member
Join Date: Jun 2015
Location: Rosemere, Quebec, Canada
Posts: 322
Hi LRM! Are you new to FMQ ? If so, and you're able to FMQ on your Class 15 clone, you could start with that machine, and do smaller projects: table runners, place mats.
I started FMQ on a Singer 411G. The throat space was small, but I did quite a few small projects. Like your Class 15 clone, my Singer had no "needle down", speed control or thread cutter. So quite a few "cons" ... However it was good practice, and didn't cost me a cent LOL
After a while, I wanted to do larger projects, and purchased the Juki TL2010Q about 5 years ago. I can find no "cons" for that machine. I did a lot of research before buying, and bought online. No regrets whatsoever.
So if you can FMQ on your Class 15 clone, and are satisfied with the results, you could stick with it until the time comes when you're no longer happy with its limitations.
Keep us posted.
I started FMQ on a Singer 411G. The throat space was small, but I did quite a few small projects. Like your Class 15 clone, my Singer had no "needle down", speed control or thread cutter. So quite a few "cons" ... However it was good practice, and didn't cost me a cent LOL
After a while, I wanted to do larger projects, and purchased the Juki TL2010Q about 5 years ago. I can find no "cons" for that machine. I did a lot of research before buying, and bought online. No regrets whatsoever.
So if you can FMQ on your Class 15 clone, and are satisfied with the results, you could stick with it until the time comes when you're no longer happy with its limitations.
Keep us posted.
01-03-2020, 01:19 PM
#5
Member
Thread Starter
Join Date: Oct 2017
Posts: 29
The deal breaker for me would be the hook system. The Juki is a semi-industrial with a rotary hook system, what that means is the hook spins in one direction and can spin very fast giving you the high sewing speeds. A class 15 is an oscillating hook, what that means is the hook moves back and forth like a pendulum on a clock and is not nearly as fast as a rotary hook machine. Both systems work, and both have their fans, but for me a rotary hook system works more reliably and is practically jam proof.
01-03-2020, 01:21 PM
#6
Member
Thread Starter
Join Date: Oct 2017
Posts: 29
Hi LRM! Are you new to FMQ ? If so, and you're able to FMQ on your Class 15 clone, you could start with that machine, and do smaller projects: table runners, place mats.
I started FMQ on a Singer 411G. The throat space was small, but I did quite a few small projects. Like your Class 15 clone, my Singer had no "needle down", speed control or thread cutter. So quite a few "cons" ... However it was good practice, and didn't cost me a cent LOL
After a while, I wanted to do larger projects, and purchased the Juki TL2010Q about 5 years ago. I can find no "cons" for that machine. I did a lot of research before buying, and bought online. No regrets whatsoever.
So if you can FMQ on your Class 15 clone, and are satisfied with the results, you could stick with it until the time comes when you're no longer happy with its limitations.
Keep us posted.
I started FMQ on a Singer 411G. The throat space was small, but I did quite a few small projects. Like your Class 15 clone, my Singer had no "needle down", speed control or thread cutter. So quite a few "cons" ... However it was good practice, and didn't cost me a cent LOL
After a while, I wanted to do larger projects, and purchased the Juki TL2010Q about 5 years ago. I can find no "cons" for that machine. I did a lot of research before buying, and bought online. No regrets whatsoever.
So if you can FMQ on your Class 15 clone, and are satisfied with the results, you could stick with it until the time comes when you're no longer happy with its limitations.
Keep us posted.
01-03-2020, 01:22 PM
#7
Member
Thread Starter
Join Date: Oct 2017
Posts: 29
01-03-2020, 05:08 PM
#9
Senior Member
Join Date: Jun 2015
Location: Rosemere, Quebec, Canada
Posts: 322
At one point, you'll probably want a machine just for FMQ !
