Go Back  Quiltingboard Forums >
  • Main
  • Juki Miyabi J-350QVP S sit down free motion >
  • Juki Miyabi J-350QVP S sit down free motion

  • Juki Miyabi J-350QVP S sit down free motion

    Old 08-15-2020, 12:29 PM
      #31  
    Junior Member
     
    Join Date: Feb 2010
    Location: Northern California
    Posts: 267
    Default

    donna--this machine can be bought and set up as a sit-down long arm (you move the fabric under the needle) which runs $6k. It can also be bought and set up as a frame long arm (you move the machine over the fabric) that runs about $8-10K depending on length/width of frame, sales promos, and dealer pricing practices). It can also be 'easily' converted from the one type of quilting machine to the other says my dealer. I don't really have the room for what I would need/want --a 10'-12' frame long arm--so I am trying to get better at sit-down FMQing. If it turns out I will never be good enough at FMQ to FMQ quilt my own quilt tops, I appreciate knowing I have the option of converting to a frame, even if I have to limit myself to a 7' frame so it will fit in my sewing room (I think the optional lengths/widths are 5', 7', 10', and 12').

    Last edited by frannella; 08-15-2020 at 12:32 PM. Reason: rephrasing to make more inteliigible
    frannella is offline  
    Old 10-27-2020, 11:49 AM
      #32  
    Member
     
    Join Date: May 2013
    Posts: 2
    Default

    I am taking a class November this year to learn how to use the machine at my sewing shop. $7 G for me is an investment. I usually quilt on my domestic so learning on this machine will be interesting. Good luck to you
    Vita is offline  
    Old 10-27-2020, 11:53 AM
      #33  
    Member
     
    Join Date: May 2013
    Posts: 2
    Default

    Any pics ??
    Vita is offline  
    Old 09-28-2021, 04:58 AM
      #34  
    Member
     
    Join Date: Nov 2012
    Posts: 3
    Default Top and Bobbin Thread for this Juki J-350QVP sit down?

    I have this machine ordered and am very excited about learning to FMQ. Currently I free motion on my domestic and feel that I could do better work on a large workspace. The cost is something I had to think long and hard about, but I decided I really wanted to be a better quilter.
    So my question is about thread. We only have a Joann and a Hobby Lobby locally, and I have to drive 2+ hours to a quilt shop, so I have to order mostly online. What thread do you use in this machine? Do you use same thread for top and bottom, or a lighter weight in bobbin? The dealer says she only uses polyester, and really didn't address the 'same thread?' top and bottom question. She did say the machine is not picky about thread, which is good because some machines ARE!!!!
    I use 50 wt cotton Connecting Thread for piecing and love it. Also use it for free machine on my domestic sewing machine. Does anyone use that for the Juki for top and/or bobbin? Just need some ideas and opinions on what works for you.
    Thanks everyone!
    dbrit89828 is offline  
    Old 09-28-2021, 05:04 AM
      #35  
    Power Poster
     
    Join Date: Nov 2009
    Location: Mableton, GA
    Posts: 11,227
    Default

    I don’t have that machine but suggest trying different threads and top/bobbin combos and see what works best and what you like best. Start with what you have first. It all might work and you might like it. I have a Brother PQ1500 and it takes most any thread.
    Stitchnripper is offline  
    Old 09-28-2021, 01:51 PM
      #36  
    Senior Member
    Thread Starter
     
    BonnieJP's Avatar
     
    Join Date: Apr 2019
    Location: USA
    Posts: 755
    Default

    Originally Posted by dbrit89828
    I have this machine ordered and am very excited about learning to FMQ. Currently I free motion on my domestic and feel that I could do better work on a large workspace. The cost is something I had to think long and hard about, but I decided I really wanted to be a better quilter.
    So my question is about thread. We only have a Joann and a Hobby Lobby locally, and I have to drive 2+ hours to a quilt shop, so I have to order mostly online. What thread do you use in this machine? Do you use same thread for top and bottom, or a lighter weight in bobbin? The dealer says she only uses polyester, and really didn't address the 'same thread?' top and bottom question. She did say the machine is not picky about thread, which is good because some machines ARE!!!!
    I use 50 wt cotton Connecting Thread for piecing and love it. Also use it for free machine on my domestic sewing machine. Does anyone use that for the Juki for top and/or bobbin? Just need some ideas and opinions on what works for you.
    Thanks everyone!
    I like Glide thread the best for my Juki J-350 Miyabi. Glide is a 100% polyester thread that comes on 5,000 yard cones for about $12 at my LQS. It comes in lots of colors, has a tiny bit of sheen, and is made in the USA. If you don't have a dealer nearby, it is also available on Amazon. I always use the same thread (can be different colors though) in the top and bobbin. I've become such a fan of Glide, I've even use it for piecing.

    You might be interested to know there's a Facebook group dedicated to the Juki J-350 Miyabi where you can also get lots of information about your new machine.

    Last edited by BonnieJP; 09-28-2021 at 01:54 PM.
    BonnieJP is offline  
    Old 09-30-2021, 06:36 AM
      #37  
    Member
     
    Join Date: Nov 2012
    Posts: 3
    Default Tension!!!!

    Have mercy!!!! My new machine is set up and I followed all instructions for threading and winding bobbin. I am totally baffled about tension. There are no numbers on tension dial so I don't know what I'm doing. Top of quilt piece looks ok, but back has eyelashes. I have fiddled with top tension with no real improvement. Even loosened bobbin tension some with same results. New needle, same polyester thread in to and bobbin. I know there is a sweet spot for tension settings, but I'm so frustrated, I don't know what else to do. Ideas???
    dbrit89828 is offline  
    Old 09-30-2021, 07:59 AM
      #38  
    Senior Member
    Thread Starter
     
    BonnieJP's Avatar
     
    Join Date: Apr 2019
    Location: USA
    Posts: 755
    Default

    Originally Posted by dbrit89828
    Have mercy!!!! My new machine is set up and I followed all instructions for threading and winding bobbin. I am totally baffled about tension. There are no numbers on tension dial so I don't know what I'm doing. Top of quilt piece looks ok, but back has eyelashes. I have fiddled with top tension with no real improvement. Even loosened bobbin tension some with same results. New needle, same polyester thread in to and bobbin. I know there is a sweet spot for tension settings, but I'm so frustrated, I don't know what else to do. Ideas???
    I sandwiched some batting between a couple of fat quarters to test the tension. I sew a little, adjust tension a little, sew a little, adjust again if necessary until the tension is perfect. I do not play with the bobbin tension, only the top tension. Some Juki owners swear by the Towa tension guage for fine tuning the bobbin tension, but I have found my test sandwich works just fine. Jamie Wallen also has a YouTube video (Taking the Stress out of Longarm Tension) that provides tips on adjusting the bobbin tension on a longarm machine.
    BonnieJP is offline  
    Old 09-30-2021, 09:30 AM
      #39  
    Member
     
    Join Date: Nov 2012
    Posts: 3
    Default

    Originally Posted by BonnieJP
    I sandwiched some batting between a couple of fat quarters to test the tension. I sew a little, adjust tension a little, sew a little, adjust again if necessary until the tension is perfect. I do not play with the bobbin tension, only the top tension. Some Juki owners swear by the Towa tension guage for fine tuning the bobbin tension, but I have found my test sandwich works just fine. Jamie Wallen also has a YouTube video (Taking the Stress out of Longarm Tension) that provides tips on adjusting the bobbin tension on a longarm machine.
    The Jamie Wallen video is good. Thanks! I'll go do more testing with his tips in mind.
    dbrit89828 is offline  
    Old 02-08-2022, 06:18 PM
      #40  
    Junior Member
     
    Join Date: Sep 2011
    Location: Tooele Ut. USA
    Posts: 185
    Unhappy Juki Long Arm machine

    I just got my Juki long arm and have set it up. I had some problems with the tension also. I tightened the screw on the bobbin case a little which helped some. I noticed that the shaft that holds the pressure foot had marks on it. I lowered the foot down a notch and it is working good. I have a free motion Tin Lizzy that I have just loved. there is no stitch regulator on it. We had a flood and I thought it was damaged so bought this Juki. just learning how to use it. My Tin Lizzy instructor said that the pressure foot should be low enough to slide a quarter under it with the quilt under it. I has worked for me. hope this helps.

    OK now I have to ask. My new Juki hat a throat plate on that is not even with the table top. shouldn't it be even? PLEASE HELP.
    krissr is offline  

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter