Go Back  Quiltingboard Forums >
  • Main
  • Complaint About Me >
  • Complaint About Me

  • Complaint About Me

    Thread Tools
     
    Old 10-19-2010, 06:14 AM
      #1  
    Senior Member
    Thread Starter
     
    Join Date: Apr 2009
    Location: Bushkill, Pa
    Posts: 534
    Default

    Why is it when I have everything lined up, a foot that has markings on it that I follow rather than the needle I still can't sew in a straight line? What is wrong with me? It's extremely annoying.
    winia is offline  
    Old 10-19-2010, 06:15 AM
      #2  
    Power Poster
     
    Join Date: Sep 2007
    Posts: 18,726
    Default

    Have you tried uncrossing your eyes???? (just kidding...)

    I have the same trouble, so don't feel like you are alone. It does seem to help when I slow down though.
    sandpat is offline  
    Old 10-19-2010, 06:16 AM
      #3  
    Super Member
     
    Join Date: Mar 2010
    Location: North Texas
    Posts: 8,710
    Default

    JOin the party. Maybe better glasses? If you find the mark you want to sew on, I will put some blue painters tape down so it is straight, then another on top of it and maybe a third. It makes it thicker so you can pratically line the fabric up with the tape and feel the border. Might help you too.
    debbieumphress is offline  
    Old 10-19-2010, 06:16 AM
      #4  
    Banned
     
    Join Date: Mar 2010
    Location: Sturbridge, Ma
    Posts: 3,992
    Default

    put some painters tape down the front of the foot onto the arm of the machine and table (if necessry) to help you guide. This helps keep it straight going under the foot.
    Holice is offline  
    Old 10-19-2010, 06:40 AM
      #5  
    Super Member
     
    Join Date: Mar 2010
    Location: Anchorage, AK
    Posts: 1,393
    Default

    staring at the needle or even at a foot close to the needle tends to result in crooked lines.....try marking the base of the machine a couple of inches ahead of your needle and use that as your guide for the edge of your fabric and see if it helps...If us use that as your primary check, you can spot check periodically to see that the edge of the fabric hear the needle is where you want it to be.

    Think of driving down the road and focusing on a spot just ahead of your hood...you end up (usually) over compensating and the car moves back and forth a lot, even tho it may be small moves. If you focus on the road several yards ahead of the car, your turns are less jerky, the ride is smoother, and the path of the car is a straighter line.
    ktbb is offline  
    Old 10-19-2010, 07:09 AM
      #6  
    Super Member
     
    sewTinker's Avatar
     
    Join Date: Sep 2010
    Location: currently living outside of nashville, tn
    Posts: 1,134
    Default

    Originally Posted by ktbb
    staring at the needle or even at a foot close to the needle tends to result in crooked lines.....try marking the base of the machine a couple of inches ahead of your needle and use that as your guide for the edge of your fabric and see if it helps...If us use that as your primary check, you can spot check periodically to see that the edge of the fabric hear the needle is where you want it to be.

    Think of driving down the road and focusing on a spot just ahead of your hood...you end up (usually) over compensating and the car moves back and forth a lot, even tho it may be small moves. If you focus on the road several yards ahead of the car, your turns are less jerky, the ride is smoother, and the path of the car is a straighter line.
    I love this advice! From now on, I'll be driving my Machine down painter's tape alley. Thank you for the vivid imagery.
    sewTinker is offline  
    Old 10-19-2010, 07:15 AM
      #7  
    Power Poster
     
    Join Date: Feb 2009
    Location: Northern Michigan
    Posts: 12,861
    Default

    one way that helped me start sewing straighter was to take a moment and draw the seam lines on my fabric with a pencil, it only takes a moment and makes a huge difference. i don't have to anymore, somehow just doing it for a couple projects helped me get the hang of keeping everything straight. i still always draw the lines for hand piecing but sew nice and straight with the machine now.
    ckcowl is offline  
    Old 10-19-2010, 08:35 AM
      #8  
    Super Member
     
    Ripped on Scotch's Avatar
     
    Join Date: Apr 2010
    Location: Ontario Canada
    Posts: 1,328
    Default

    I have found that if I line myself up with the center of the needle and not the center of the machine I sew a much straighter line.
    Ripped on Scotch is offline  
    Old 10-19-2010, 09:03 AM
      #9  
    Super Member
     
    Join Date: Aug 2010
    Location: Piedmont Virginia in the Foothills of the Blue Ridge Mtns.
    Posts: 8,562
    Default

    Originally Posted by ktbb
    staring at the needle or even at a foot close to the needle tends to result in crooked lines.....try marking the base of the machine a couple of inches ahead of your needle and use that as your guide for the edge of your fabric and see if it helps...If us use that as your primary check, you can spot check periodically to see that the edge of the fabric hear the needle is where you want it to be.

    Think of driving down the road and focusing on a spot just ahead of your hood...you end up (usually) over compensating and the car moves back and forth a lot, even tho it may be small moves. If you focus on the road several yards ahead of the car, your turns are less jerky, the ride is smoother, and the path of the car is a straighter line.
    I'd like to expand on this and suggest placing a FULL small Post-it note (glued edge of notes) smack up against the right side of your presser foot with the majority of it extending in front of the foot. Then the front edge of the Post-it note becomes your eyeball site, and the raised edge of the note becomes your guide to keep the fabric aligned.

    Two issues, the sticky back on the Post-it Note does NOT adhere to most throat plates more than a minute -- I use a fat, thick rubber band around the free-arm portion of MY Bernina 1031 to hold it in place. Or a long piece of scotch tape. Both are easily repositioned for changing bobbins or sewing other seams.

    Also, if your feed dogs extend outside the width of your presser foot, this technique becomes more difficult. Try learning to sew with a changed needle position to create your 1/4" seam allowance.

    This little tip has saved me literally countless hours of pokey driving like a little old lady eyeballing right off the hood of her car! I now sew a perfectly straight seam with the pedal to the metal!

    Jan in VA
    Jan in VA is offline  
    Old 10-19-2010, 09:13 AM
      #10  
    Super Member
     
    franie's Avatar
     
    Join Date: Mar 2010
    Location: SW Iowa
    Posts: 6,550
    Default

    I "wave" sometimes too! I usually fix it. Watch out for leaning left or right at the end of a seam.
    franie is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    schnurke
    For Vintage & Antique Machine Enthusiasts
    13
    12-18-2012 08:26 AM
    3Gquilter
    Main
    0
    04-06-2010 12:54 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter