Go Back  Quiltingboard Forums >
  • Main
  • Those Twin needles? What to do... >
  • Those Twin needles? What to do...

  • Those Twin needles? What to do...

    Thread Tools
     
    Old 01-19-2011, 05:02 AM
      #31  
    Senior Member
     
    CompulsiveQuilter's Avatar
     
    Join Date: Mar 2010
    Location: Knoxville, TN
    Posts: 733
    Default

    Can you do a decorative stitch of any sort using the double needle? At least a zig-zag? My manual only covers the basics of how to thread for a double.
    CompulsiveQuilter is offline  
    Old 01-19-2011, 05:12 AM
      #32  
    Senior Member
     
    Karyn's Avatar
     
    Join Date: Apr 2009
    Location: Mississippi
    Posts: 443
    Default

    Originally Posted by mytwopals
    I've never used mine. I doubt I would ever use it for quilting. The front would look nice. But doesn't the back side appear like a zig-zag stitch? At least, that's what I've always thought.
    Yes the backside is a zig-zag. I only tried mine once and it took a lot to get my tension back to normal after I changed back to a single needle. Im sure that was just due to my inexperience. I love the way double seams look.
    Karyn is offline  
    Old 01-19-2011, 05:27 AM
      #33  
    Junior Member
     
    Kate's Avatar
     
    Join Date: Mar 2010
    Location: WV
    Posts: 288
    Default

    I have twin needles. Never think about them. I will have to try some of these things.
    Kate is offline  
    Old 01-19-2011, 05:36 AM
      #34  
    Power Poster
     
    Join Date: Sep 2007
    Posts: 18,726
    Default

    My machine dealer gave me a lesson on them one day...it is amazingly cool the different effects you can get with them. Using different color thread just adds to the "bling" effect! Play with them- they are loads of fun.

    I also use them to hem up DH's sweats...them make it look just like the Original.
    sandpat is offline  
    Old 01-19-2011, 06:16 AM
      #35  
    Banned
     
    Join Date: Apr 2010
    Location: ATL
    Posts: 205
    Default

    Also check out the Triple Needle from Schmetz! You can run 3 threads instead of 2 for some really neat designs!
    mswordwiz is offline  
    Old 01-19-2011, 06:21 AM
      #36  
    Super Member
     
    maryb119's Avatar
     
    Join Date: Dec 2009
    Location: Iowa
    Posts: 8,128
    Default

    If you are going to use a twin needle for decorative stitches, turn your fly wheel by hand one full design just to make sure that both needles will go thru the hole in the face plate. Some older machines will only allow straight stitching with a twin needle. I use them often in my embroidery to get that "shadow" effect in my stitching.
    maryb119 is offline  
    Old 01-19-2011, 06:22 AM
      #37  
    Senior Member
     
    redpurselady's Avatar
     
    Join Date: Jan 2010
    Location: Texas
    Posts: 958
    Default

    I used twin needles for sewing down the bias on a stained glass wall hanging. This was the first time I ever used this type of needle and I broke 3 sets - UGH! After losing $15, I decided to try again and went real slow. I managed to finish the wall hanging but decided I will zig zag my bias down from now on. May not look as pretty, but at least I don't break expensive needles!
    redpurselady is offline  
    Old 01-19-2011, 06:29 AM
      #38  
    Junior Member
     
    GrandmaAva's Avatar
     
    Join Date: Jan 2011
    Location: North Olmsted, OH
    Posts: 144
    Default

    I suggest lightweight fabric, which will be easier for the middle of the pintuck to raise up a little bit.

    The other method for pintucks is to fold the fabric and sew near the fold.

    Usually, several pintucks are done fairly close together, often in symmetrical groups on each side of a garment or item.
    GrandmaAva is offline  
    Old 01-19-2011, 06:37 AM
      #39  
    Super Member
     
    Janetlmt's Avatar
     
    Join Date: Mar 2010
    Posts: 1,039
    Default

    I use twin needles to do all kinds of decorative stitches. I have several books called..Sewartfully Yours. The book shows you how to use all the decorative stitches on your machine in combinations for cute edgings. It is a lot of fun to experiment. I am hoping to get a quilt top done that I have embroidered on my machine..then sew it together with the decorative stitching. So much to do and so little time.
    Peace and Blessings,
    Janetlmt is offline  
    Old 01-19-2011, 06:48 AM
      #40  
    Super Member
     
    maryb119's Avatar
     
    Join Date: Dec 2009
    Location: Iowa
    Posts: 8,128
    Default

    Originally Posted by redpurselady
    I used twin needles for sewing down the bias on a stained glass wall hanging. This was the first time I ever used this type of needle and I broke 3 sets - UGH! After losing $15, I decided to try again and went real slow. I managed to finish the wall hanging but decided I will zig zag my bias down from now on. May not look as pretty, but at least I don't break expensive needles!
    If you are breaking them, one suggestion is that when you have the needle down and try to pivot your fabric in a turn, remember you can't do that because there are 2 needles side by side and you can't pivot. I had students think they could pivot and broke needles. Also stitch slower. You can't be in a hurry.
    maryb119 is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    dollycaswell
    Tutorials
    82
    03-24-2013 08:29 AM
    hudgoddess
    Pictures
    28
    01-31-2013 04:23 PM
    TeeGee
    For Vintage & Antique Machine Enthusiasts
    23
    05-21-2012 09:03 AM
    Parrothead
    Main
    11
    12-06-2010 08:53 AM
    redpurselady
    Pictures
    13
    09-16-2010 09:01 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter