Go Back  Quiltingboard Forums > Main
Pass On The Best Idea You've Had While Quilting >

Pass On The Best Idea You've Had While Quilting

Pass On The Best Idea You've Had While Quilting

Thread Tools
 
Old 02-26-2011, 07:56 PM
  #181  
Super Member
 
Join Date: Dec 2010
Location: Finger Lakes, NY
Posts: 1,873
Default

I hang a lanyard around my neck and hang a small pair of scissors on the clip while sewing.

Use an empty paper towel roll for binding. After ironing the binding in half, wrap it around the roll and put it on your lap. No more tangled mess.
GagaSmith is offline  
Old 02-26-2011, 08:01 PM
  #182  
Junior Member
 
Join Date: May 2010
Location: Iowa
Posts: 100
Default

I have one of the black toolboxes on wheels with the yellow pullout tray . From the home improvement store. Great to take to quilting and have everthing with me.
I also use safety pins when i have lots of blocks for a quilt -pin 10 blocks together. Then when you go to count your blocks you can pick-up 1 saftey pinned stack and know that is ten. Helps a lot if you have 100 blocks in a quilt.
I always make a copy of my pattern so I can write on it -like what color and any other changes I may make in the color placement - without writting on my organial pattern. Then keep the copy with my project until I am finished with my quilt.
JJane is offline  
Old 02-26-2011, 08:03 PM
  #183  
Member
Thread Starter
 
Sashing-Sarah709's Avatar
 
Join Date: Feb 2011
Location: Missouri
Posts: 85
Default

Hi guys,
Just a fast note (I still have company) to let you know that 8296 quilters have read this thread and that 180 kind souls have posted some pretty fantastic ideas! Where else on the web do you find so many giving folks? I'm enjoying my inlaws visit but I can't wait to read all your ideas. Thank you for helping each other and for sharing--this is so nice!!

Sashing-Sarah709
Sashing-Sarah709 is offline  
Old 02-26-2011, 08:04 PM
  #184  
Senior Member
 
Calico Grammy's Avatar
 
Join Date: Oct 2009
Location: Cincinnati OH
Posts: 895
Default

Originally Posted by smitty
Id anyone is still reading this long-long post---I have an old
microwave cart on wheels. ironing board on top. shelves under. good place for spray cans,air cans, etc. pull it to the machine when needed. first shelf holds plastic set of
small drawers for small things.
This is a great idea!!!!
Calico Grammy is offline  
Old 02-26-2011, 08:07 PM
  #185  
Senior Member
 
Calico Grammy's Avatar
 
Join Date: Oct 2009
Location: Cincinnati OH
Posts: 895
Default

Originally Posted by Lindsey
I keep one of those rug samples under my sewing machine. It keeps the noice down and helps with vibrations and I also stick the pins in it as I pull them out.
Great idea!!

I use wooden clothespins (sometimes plastic...both cheap at $$ store), mark numbers and/or letters (A,B,etc) on the end w/magic marker, then clip the clothespin to the strips or blocks to keep them organized.
Calico Grammy is offline  
Old 02-26-2011, 08:14 PM
  #186  
Super Member
 
tellabella's Avatar
 
Join Date: Oct 2010
Location: Toronto Canada
Posts: 1,130
Default

I had a round glass table top from one of those inexpensive side tables..I use it for applique...I put lines on it with Sharpie...up and down and crossed...this way I do not have to press my fabric..I put my fabric down on the glass, I can tape it to the glass, I get the centre point right away and I also get the diagonal lines...I can pick up the glass and put it on a Rubbermaid container with a light in it for tracing...

I am working on Dear Jane blocks but this is a good idea for any paper piecing...when cutting the units for paper pieced block, I didn't want to lose them...I use a box lid, from the cardboard boxes that hold the printer paper, I put a 12 x 12 cork board in it...sell them at Walmart..4 for 10$ or so...and as I cut out the units, I pin them to the cork...this way I can see how they go together...when I cut out the fabric for the units, I pin it next to the units, and I know exactly what fabric is for what...then as I make them I pin them back and I can see the block coming together...I took another cork and drew with a Sharpie tthe size of the block...in this case the triangle and the square and so I can pin it on to see if it needs to be trimmed...I can block it on the cork..it has turned out to work really well for me...
tellabella is offline  
Old 02-26-2011, 08:24 PM
  #187  
Super Member
 
fivepaws's Avatar
 
Join Date: Jun 2010
Location: Northern Virginia
Posts: 2,774
Default

Originally Posted by Jan in VA
I use a full 1" x 1.5" Post-it-Note pad flush up against the presser foot, held down with a fat rubber band or a strip of tape, to keep my 1/4" seams exact. I can sew two strips together in about 10 seconds using this! All my seams are straight, equal, and easy.

Jan in VA
Thats a great idea, Jan. Thanks ♥
fivepaws is offline  
Old 02-26-2011, 08:25 PM
  #188  
Super Member
 
fivepaws's Avatar
 
Join Date: Jun 2010
Location: Northern Virginia
Posts: 2,774
Default

Originally Posted by Carron
I glued a narrow magnetic strip across the top front of my sewing machine. Then when I am sewing something that has the straight pins and as they approach the needle, I pull them out and stick them onto the magnetic strip. Nothing falling onto the floor or worse into the lap.
I thought that you had to be very careful with magnets around the computerized machines or is that just a tale. ♥
fivepaws is offline  
Old 02-26-2011, 08:30 PM
  #189  
Member
 
Join Date: May 2010
Location: 10500 Bergtold Rd #203 Clarence,NY
Posts: 76
Default

Hi,

Happy weekend hope everyone is enjoying it. It's snowing here again and the roads where terrible. Staying home and sewing all day tomorrow
Just wanted to say thanks for all the wonderful new tips. While I was at Harbor Freight I bought those long scissors for cutting batting for 2.99


Littlebelle
littlebelle is offline  
Old 02-26-2011, 08:46 PM
  #190  
Super Member
 
Join Date: Jan 2011
Location: Port Lavaca, TX
Posts: 1,276
Default

Originally Posted by Carron
I glued a narrow magnetic strip across the top front of my sewing machine. Then when I am sewing something that has the straight pins and as they approach the needle, I pull them out and stick them onto the magnetic strip. Nothing falling onto the floor or worse into the lap.
It is a great idea for an older or non computer machine.
On some of heavy older metal ones it will stick by itself.
but, be careful.
Don't put anything madnetic near a new one with a computer in it!!! The magnetic field can kill it.
Same thing for other computerised stuff like watches and cell phones.
As I understand it, the magnetic field can de-magenetize or de-polarize the temporary memory ?
jpthequilter is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EllieGirl
General Chit-Chat (non-quilting talk)
12
10-24-2013 04:45 PM
ChildoftheUniverse
General Chit-Chat (non-quilting talk)
12
11-22-2011 05:04 PM
DonnaB
General Chit-Chat (non-quilting talk)
22
09-14-2011 06:17 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter