Darning foot
#31
Originally Posted by mar32428
Originally Posted by KimS
Originally Posted by ube quilting
Are your feed dogs down and are you moving your quilt to fast for the needle and it is bending as you move the quilt? This can happen when the needle is not fully out of the fabric as you move the quilt around. Try slowing your motion down a bit and if you can slow the machine motor speed, try that also. Use a practice sandwich before starting on your project. May some of this rant help you!
peace :D
peace :D
#32
Senior Member
Join Date: Feb 2011
Location: Josephine, Texas
Posts: 799
On you foot the little bar at the stop that sticks out
it might need to rest on the screw where you attach it to
your machine..my even foot feed it like that on my Janome.
You might look at your manual to verify how it should be
attached. Hope this might help.
it might need to rest on the screw where you attach it to
your machine..my even foot feed it like that on my Janome.
You might look at your manual to verify how it should be
attached. Hope this might help.
#34
Originally Posted by suekenyon
On you foot the little bar at the stop that sticks out
it might need to rest on the screw where you attach it to
your machine..my even foot feed it like that on my Janome.
You might look at your manual to verify how it should be
attached. Hope this might help.
it might need to rest on the screw where you attach it to
your machine..my even foot feed it like that on my Janome.
You might look at your manual to verify how it should be
attached. Hope this might help.
#35
Originally Posted by KimS
Originally Posted by Holice
I don't now the shape of the darning foot. Can you have the hole enlarged by grinding it on the sides or in the hole. Which side is it hitting. If in the front then cut a space in the front like a horse shoe. This is the way many did the original ones available back in the 70s
#37
I've changed the needle twice, changed bobbins, rethreaded the machine, taken the foot off, put it back on just to make certain everything was where it needed to be and then had 2 chocolate chip cookes. LOL!! I've ordered a new foot so I'll just wait until it gets here and if that doesn't make a difference then I guess I'll have to find a repairman. In the meantime think I'll have another chocolate chip cookie. ;-)
Thread
Thread Starter
Forum
Replies
Last Post