Desperate--Monopoly thread keeps breaking
#1
Super Member
Thread Starter
Join Date: Mar 2011
Location: Peotone IL
Posts: 2,802
![Default](/images/icons/icon1.gif)
I'm having trouble with Superior's Monopoly clear thread breaking while I'm trying to quilt a small wallhanging. I'm using Superior's recommended 70/10 topstitch needle and tension of 2. I tested on a scrap sandwich and all was OK. Now I'm trying to quilt the piece and it sews fine for a few inches and then breaks again. Needle has been rethreaded numerous times. Bobbin has been taken out and replaced. Bobbin thread is Aurifil 100% rayon. Would that make a difference? I've tried both with a spool sleeve and without. I am getting so frustrated! Anyone have any ideas what else I can try?
I'm not FMQ, but doing straightline quilting with a walking foot.
I sure hope someone can help. It should not be taking me this long to quilt it!
I'm not FMQ, but doing straightline quilting with a walking foot.
I sure hope someone can help. It should not be taking me this long to quilt it!
#5
![Default](/images/icons/icon1.gif)
If you call Superior Threads 800 number they will help you. I use monopoly all the time and no problems except when it gets tangled at the first threading point. I think its best to put the spool in a jar or something other than putting it on the spindle. I also skip the last threading point.
#6
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
![Default](/images/icons/icon1.gif)
some invisible threads stretch & break frequently if trying to sew too fast- the speed stretches them- you may have to slow way down---and rayon in the bobbin? maybe try a cotton? or a poly blend? just a thought- but speed is probably the issue-
if you visit Superiors web site they have lots of hints, tips & help links - your answer may be there.
if you visit Superiors web site they have lots of hints, tips & help links - your answer may be there.
#8
Super Member
Thread Starter
Join Date: Mar 2011
Location: Peotone IL
Posts: 2,802
![Default](/images/icons/icon1.gif)
Thanks for all your quick responses. I'd checked out the Superior Threads site before I posted my desperation plea. That's where I got preferred needle type/size and tension recommendation. I checked for burrs--didn't have any. I put the spool in a mug and now it's working fine.
Yay! Guess I'll have to get a free-standing spool holder.
I pieced this using rayon thread because it was the best color I could find for the backing. I used the rayon in both top thread and bobbin while piecing. It's just a small wallhanging 18 X 24, so it won't be getting any hard use.
![Thumb Up](https://cdn.quiltingboard.com/images/smilies/thumbup.png)
I pieced this using rayon thread because it was the best color I could find for the backing. I used the rayon in both top thread and bobbin while piecing. It's just a small wallhanging 18 X 24, so it won't be getting any hard use.
#10
Super Member
Thread Starter
Join Date: Mar 2011
Location: Peotone IL
Posts: 2,802
![Default](/images/icons/icon1.gif)
It was breaking in the tensioners. I think it may have been getting caught at the spool. Putting the spool in a mug and running the thread over the top of my machine seems to have solved the problem.
Thread
Thread Starter
Forum
Replies
Last Post