Stuff you Use for Quilting, that isn't originally for Quilting!!!
01-13-2013, 07:32 AM
#341
Power Poster
Thread Starter
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,728
01-13-2013, 08:16 AM
#343
Power Poster
Thread Starter
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,728
.......kidding!!!!!!!!!!!!
01-13-2013, 09:33 AM
#344
Super Member
Join Date: Aug 2010
Location: My Sewing Room
Posts: 1,180
Dollar store coffee filters for round crazy-quilt blocks or the cathedral window lookalikes, flexible chopping mats (dollar store). These come 2 in a pack, are transparent, and can be used to make templates or save your cutting mat. For 50 cents each, they are inexpensive enough to toss when they are no longer useful.
A magnetic knife or tool rack is great for holding things such as scissors, screwdrivers, tweezers, etc. and keeps them off the surface of your sewing table. I use a drafter's circle template for circles up to 2 1/2 inches in diameter. I use a cut piece of wooden dowel for pressing open seams on non-flat items. Bamboo skewers for stilettos. A "rubber" mallet from HF for pounding those impossible thick seams into submission.
My sewing table is an 8-foot "conference" table from an office store. It holds 2 sewing machines and a serger, plus my cutting mat and computer flat screen.
I took some aquarium tubing, cut into appropriate widths, them split to open them up. Place this over the wound bobbins to keep them from unwinding.
A magnetic knife or tool rack is great for holding things such as scissors, screwdrivers, tweezers, etc. and keeps them off the surface of your sewing table. I use a drafter's circle template for circles up to 2 1/2 inches in diameter. I use a cut piece of wooden dowel for pressing open seams on non-flat items. Bamboo skewers for stilettos. A "rubber" mallet from HF for pounding those impossible thick seams into submission.
My sewing table is an 8-foot "conference" table from an office store. It holds 2 sewing machines and a serger, plus my cutting mat and computer flat screen.
I took some aquarium tubing, cut into appropriate widths, them split to open them up. Place this over the wound bobbins to keep them from unwinding.
01-13-2013, 12:22 PM
#345
Super Member
Join Date: Oct 2009
Location: Maine-ly Florida
Posts: 3,917
Because you asked so nicely, I won't give you the old "put the cow on the frig" answer! :lol:
First of all, it's not just for dairy cows, but also for beef as a cow might ingest something metallic and that would not be good for the cow. Eg. broken fence wire, dropped nail/
The magnet goes into the first part of the stomach (the cow has four parts) and it just stays there, to collect any metals that she might eat. Many farms will do it as a routine practice, such as at the time of the first breeding. Some will only insert it, when they think the cow has a problem, but that's often too late, as by then there's probably signs of infection, which may be beyond resolution.
A compass can be placed on the side of the stomach to check if the cow has one inside of her already.
So now, you can all have fun sharing this tidbit brought to you by your Quilting Board Dairy Farmers ... including OKSewGlad, QuiltE and ????
First of all, it's not just for dairy cows, but also for beef as a cow might ingest something metallic and that would not be good for the cow. Eg. broken fence wire, dropped nail/
The magnet goes into the first part of the stomach (the cow has four parts) and it just stays there, to collect any metals that she might eat. Many farms will do it as a routine practice, such as at the time of the first breeding. Some will only insert it, when they think the cow has a problem, but that's often too late, as by then there's probably signs of infection, which may be beyond resolution.
A compass can be placed on the side of the stomach to check if the cow has one inside of her already.
So now, you can all have fun sharing this tidbit brought to you by your Quilting Board Dairy Farmers ... including OKSewGlad, QuiltE and ????
01-13-2013, 12:39 PM
#346
Super Member
Join Date: Oct 2009
Location: Maine-ly Florida
Posts: 3,917
Yes, that is what I made mine out of. Actually used an outdoor roll up shade (figured it would be heavy duty). It is 6feet wide with a chain to roll it up and down. I took off the shade material that came with it and put on flannel (first felt, but fabric didn't stick too good to it). Then my DH mounted it over my closet. I just roll it down when I need it. I don't have an empty wall big enough for a design wall.
01-13-2013, 01:22 PM
#347
Junior Member
Join Date: Jan 2011
Location: St. Augustine, Fl and Nashville, Ga.
Posts: 267
Wow!!! So many good responses!!!! I'm going thru the house looking for some of these items but I believe I will buy a new toilet brush. Haha. My favorite item that I use in my quilting room is a kitchen island on wheels for my cutting table. No bending, my mat fits perfect, and with the thick top I clipped an ott light on the back side. I love antiques so I'm always looking for these to decorate with and be functional. Jars - selvage, ribbons, buttons, wooden spools. Also use an antique silverware tray for my scissors and rotary cutters. Love this site!!!
01-14-2013, 10:09 AM
#348
Super Member
Join Date: Feb 2011
Location: Quilting, crocheting, sewing and crafting in my Sewing Room...Peaceful and wonderful !!
Posts: 5,317
okay...you all made my day with some of these posts .. Some ideas I didn't know about and some I already bought, snagged or found. Thank you !! I needed the laugh today !!
Thread
Thread Starter
Forum
Replies
Last Post
karenm36
General Chit-Chat (non-quilting talk)
72
11-25-2020 08:37 AM
Laura in Montreal
Pictures
46
07-13-2018 10:13 AM
babyfireo4
General Chit-Chat (non-quilting talk)
9
04-30-2011 01:38 PM
