New needle -- why didn't I think of that?!
#1
Senior Member
Thread Starter
Join Date: Oct 2011
Location: JAX
Posts: 673
New needle -- why didn't I think of that?!
I just started a new quilt -- or at least I have started to make some lovely blocks that may end up as a quilt one of these days. . .. Anyway, I was having a problem with the threads in the fabric pulling (almost like when you pull a thread to find out where the straight of grain is) as I was sewing. I couldn't figure out what was wrong, but I finally decided it was the needle and, sure enough, when I replaced it, the stitching was perfect.
It's not like I never change the needle, in fact, I had changed it a couple of times lately when I broke (!) not one but two needles as I was trying to make a diaper bag and had real problems, probably cause I used much too stiff an interfacing.
So, this just a reminder that, if you are having some sewing problems and even if you think your needle is not the culprit, try changing the needle. Worked for me.
Thanks for letting me share.
It's not like I never change the needle, in fact, I had changed it a couple of times lately when I broke (!) not one but two needles as I was trying to make a diaper bag and had real problems, probably cause I used much too stiff an interfacing.
So, this just a reminder that, if you are having some sewing problems and even if you think your needle is not the culprit, try changing the needle. Worked for me.
Thanks for letting me share.
#4
Super Member
Join Date: Jan 2011
Location: Small town in Northeast Oregon close to Washington and Idaho
Posts: 2,795
And make sure you are using the right size of the needle. Check Superior Threads. The weight of the thread and the needle size need to match. I spent two and a half years claiming I had a bad sewing machine because my size 70 needle wouldn't sew 40 wt. Mettler thread. Finally the dealer put a 100 needle in my machine and it sewed perfect! I had complained here on the board forever about it and to my LQS owner and the dealer's wife and no one had an answer. Needle and thread must match!
#6
I have started replacing EVERYTHING sooner. When I am starting to cut out a new quilt, I use a new rotary blade. When I start sewing on a project, I use a new needle.
Having invested (or more) in fabrics, then I can afford to spend another $5 on replacements. I still keep the 'used' blades and they are used for batting and/or paper. But I decided to make another investment in the project, knowing that it will be worth it in the mean time. Besides the cost of the fabric is the cost of my sanity trying to figure out why thinks don't seem right sometimes.
Since I started this, I actually have a more enjoyable time sewing. Go figure! I don't know why I didn't think of it first.
Oh - and I do the same with straight pins. If they don't want to go through or are bent, I toss them in a pop can.
Having invested (or more) in fabrics, then I can afford to spend another $5 on replacements. I still keep the 'used' blades and they are used for batting and/or paper. But I decided to make another investment in the project, knowing that it will be worth it in the mean time. Besides the cost of the fabric is the cost of my sanity trying to figure out why thinks don't seem right sometimes.
Since I started this, I actually have a more enjoyable time sewing. Go figure! I don't know why I didn't think of it first.
Oh - and I do the same with straight pins. If they don't want to go through or are bent, I toss them in a pop can.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
General Chit-Chat (non-quilting talk)
12
07-26-2011 02:30 AM