Don't touch that tension...
06-24-2013, 09:32 AM
#61
Junior Member
Thread Starter
Join Date: Jun 2012
Location: North Carolina
Posts: 127
Originally Posted by Sew happy
That is funny. As a child my mother would also say don't touch the tension. I'd like to dispel the fear out there for
those who don't know about tension.
My husband and I restored and collected many machines and sold most of them. I have old machines and newer computerized machines. Tension does not change because a machine has a computer in it. It is a nice feature that with most new computerized machines, the tension if changed reverts back to factory default.
Due to fabrics differing in texture and needle size usage, you really should be comfortable with changing tension.
The ideal tension on your machine stitch should have the knot sandwhiched between the top and bottomfabrics. If the knot is on the top fabric, the tension is too tight. Thus, lessen the tension. If the knot is on the bottom fabric, then the lower tension is too tight and you need to increase upper tension. It's kind of like a tug and war. If you cannot adjust the tension to suit you, then you may need to turn the bobbin screw that adjusts tension, this should only be a slight and minimal turn. Tightening that screw to the right, makes the bobbin thread tension tighter, left turn makes it looser.
Sometimes tension problems are also caused by needing to change a needle, clean lint out of the feed dogs and remove the cover plate to remove any lost small pieces of thread and lint. You may need to look closely, as very often there is a wedged in piece of lint in the feed dogs at the farther end of the feed dog.
Most of the machines I've cleaned and readjusted tension too had problems simply because of threads, lint, dust and dirt. Patience is the key to keeping a machine running perfectly. (There was a time I was afraid to do anything to a machine, and if I can do it, anyone can.)
those who don't know about tension.
My husband and I restored and collected many machines and sold most of them. I have old machines and newer computerized machines. Tension does not change because a machine has a computer in it. It is a nice feature that with most new computerized machines, the tension if changed reverts back to factory default.
Due to fabrics differing in texture and needle size usage, you really should be comfortable with changing tension.
The ideal tension on your machine stitch should have the knot sandwhiched between the top and bottomfabrics. If the knot is on the top fabric, the tension is too tight. Thus, lessen the tension. If the knot is on the bottom fabric, then the lower tension is too tight and you need to increase upper tension. It's kind of like a tug and war. If you cannot adjust the tension to suit you, then you may need to turn the bobbin screw that adjusts tension, this should only be a slight and minimal turn. Tightening that screw to the right, makes the bobbin thread tension tighter, left turn makes it looser.
Sometimes tension problems are also caused by needing to change a needle, clean lint out of the feed dogs and remove the cover plate to remove any lost small pieces of thread and lint. You may need to look closely, as very often there is a wedged in piece of lint in the feed dogs at the farther end of the feed dog.
Most of the machines I've cleaned and readjusted tension too had problems simply because of threads, lint, dust and dirt. Patience is the key to keeping a machine running perfectly. (There was a time I was afraid to do anything to a machine, and if I can do it, anyone can.)
06-24-2013, 10:05 AM
#62
Senior Member
Join Date: Jul 2009
Location: Bangor North Wales
Posts: 353
Just one thing to add - be careful of that tiny bobbin screw. Use the correct screw driver - the ones that came with my machine were not appropriate being far too big. Watchmaker's or optician's screw drivers are the best. Hold the correct screw driver at 90 to the bobbin then you won't ruin the screw head. Many years ago it was an expensive night mare to replace that little screw!
06-24-2013, 12:21 PM
#63
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
Originally Posted by cabbagepatchkid
I'd be happy to hear from others, on this, because I thought it was the opposite....never adjust the tension unless presser foot was up. I use the vintage machines so not sure if they differ from the newer models.
06-24-2013, 01:30 PM
#64
Member
Join Date: Mar 2011
Location: Florida
Posts: 69
I'm hearing about tension. My machine, Viking Designer 1 is supposed to set automatically. I just had it serviced and I'm still having trouble with uneven stitches, skipped stitches. I use the right thread, the right needle and still problems. Someone suggested that I buy better thread. What do you all think? I would appreciate any info. I've been sewing all my life on a Singer. I think this is the temperamental machine and not the old ones.
06-24-2013, 01:46 PM
#65
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
I think you will need to become a detective here is a link:
http://www.quiltingboard.com/vintage...s-t170748.html
http://www.quiltingboard.com/vintage...s-t170748.html
Thread
Thread Starter
Forum
Replies
Last Post
sewingsuz
Main
25
04-30-2017 12:50 PM
