Go Back  Quiltingboard Forums >
  • Pictures
  • Block problems >
  • Block problems

  • Block problems

    Thread Tools
     
    Old 08-05-2013, 05:18 PM
      #1  
    Member
    Thread Starter
     
    sofa's Avatar
     
    Join Date: Aug 2013
    Posts: 6
    Unhappy Block problems

    I am just getting into quilting and have made some simple blocks. However I am disappointed to find some imperfections that I am worried might cause me problems down the line. These are some examples:


    It has some rippling and the dimensions are slightly off on one side


    In the center the stitching doesn't line up


    A large ripple at the bottom



    Am I doing well enough to try more advanced blocks or should I not be having these problems? Any tips or suggestions?
    sofa is offline  
    Old 08-06-2013, 12:41 PM
      #2  
    Senior Member
     
    dogsgod's Avatar
     
    Join Date: Jun 2010
    Location: Virginia
    Posts: 489
    Default

    Steam and busy fabrics and no one will ever see those "mistakes"! Seriously, get over it, you're doing great, I say go for it!
    dogsgod is offline  
    Old 08-06-2013, 12:52 PM
      #3  
    Junior Member
     
    Sharon Chaffino's Avatar
     
    Join Date: Sep 2010
    Location: Upland, Ca
    Posts: 107
    Default

    Pressing your blocks should help. I think they look pretty good. If you are concerned about the centers, make sure your seems nest together and try one pin to hold when sewing. Great start. Look forward to seeing quilt when you are done.
    Sharon Chaffino is offline  
    Old 08-06-2013, 12:55 PM
      #4  
    Super Member
     
    Join Date: Aug 2009
    Location: The middle of an IL cornfield
    Posts: 7,014
    Default

    I love your fabric choices and your workmanship. I'd put those blocks in my quilt.

    You can starch your fabric before cutting. That helps a good bit. Especially when working with a bias edge. There are many online videos and such to help you if those imperfections are going to drive you crazy. For example, there are many ways to make half square triangles. Some people get better results with one instead of another.
    Lisa_wanna_b_quilter is offline  
    Old 08-06-2013, 01:12 PM
      #5  
    Member
     
    Join Date: Aug 2013
    Location: BC. Canada
    Posts: 65
    Default

    I'd say it depends... When you start you want to complete something so badly. It was suggested to me to make something 'small' for myself first ( I did a runner first) so you don't sweat too much! Or put yourself off... You might want to start with cheaper material to practice too. Anything new we try..we can't expect perfection. It takes practice. Enjoy the learning and if the join is going to annoy you, try undoing and try again. Us human beings often expect perfection first time. We are all ( mostly) learning and improving. One thing I like is the glue baste rather than pins ( each to their own) I find it holds flatter and so easier to lineup. Or try a pin right on that seam or close to it when sewing together. You will improve fast, don't worry. Your color combo is great and you are not far out! Why not keep going, join up and see how it looks. It is all good practice, beyond all - have fun.
    ComeAndSew is offline  
    Old 08-06-2013, 01:13 PM
      #6  
    Super Member
     
    wolph33's Avatar
     
    Join Date: Jul 2010
    Location: Wi
    Posts: 9,232
    Default

    not very bad at all-keep going and it will be beautiful
    wolph33 is offline  
    Old 08-06-2013, 01:21 PM
      #7  
    Senior Member
     
    Join Date: Apr 2010
    Location: Sunny Arizona
    Posts: 476
    Default

    I think your blocks are great. Just wondering if your seams are even. Always the same size. That could make one side larger than the other. Figure out a place on your machine that is 1/4" and try to stay with it. A stack of sticky notes on the 1/4" line would help guide you. Keep going!!!! Ann
    krafty14 is offline  
    Old 08-06-2013, 01:23 PM
      #8  
    Super Member
     
    Join Date: Feb 2013
    Posts: 2,657
    Default

    Originally Posted by wolph33
    not very bad at all-keep going and it will be beautiful
    I agree, practice makes perfect and you're already on the road to a really pretty quilt. Anxious to see it when it's done. BTW, welcome to the board
    Misty's Mom is offline  
    Old 08-06-2013, 02:04 PM
      #9  
    Power Poster
     
    Join Date: Mar 2011
    Location: Ontario, Canada
    Posts: 41,481
    Default

    Rotary cut your starched fabric accurately. Sew with accurate 1/4 inch seams. A little dab of Elmer's washable school glue in the seam allowance helps to keep intersections in place for sewing. Your block looks very nice and just keep going. Every project will improve your skills.
    Tartan is offline  
    Old 08-06-2013, 02:08 PM
      #10  
    Power Poster
     
    Join Date: Mar 2013
    Location: Corpus Christi, Tx.
    Posts: 16,105
    Default

    If quilt inspectors come to your house and get that close, they better be the ones buying it or show them the door and don't let it hit them in the hiney on the way out.
    tessagin is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Vicky Navarre
    Main
    12
    11-24-2012 09:14 PM
    Knot Sew
    Main
    35
    04-12-2008 01:33 PM
    gizzie
    Main
    2
    02-03-2008 03:44 PM
    NewsletterBot
    Main
    4
    07-30-2007 04:05 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter