Go Back  Quiltingboard Forums > Main
Input Requested >

Input Requested

Input Requested

Thread Tools
 
Old 01-01-2014, 01:12 PM
  #31  
Super Member
 
Join Date: May 2011
Location: Pacific NW
Posts: 9,413
Default

I have tried them all. First, a flannel-backed tablecloth. It did not work well at all, nothing stuck to it and it was too small. Then I tried a flannel sheet, then flannel yardage. The blocks would fall off if someone walked by, or if you just looked at it. Not sticky at all. Then I put up some W&N batting, and that stuff works great! I simply tacked the batting onto the wall.
Peckish is offline  
Old 01-01-2014, 01:24 PM
  #32  
Senior Member
 
Rubesgirl's Avatar
 
Join Date: Jan 2012
Location: Central Florida
Posts: 830
Default

I just put up a 7'x7' design wall by covering styrofoam insulation boards with warm and natural batting. It works great and I love the way it grabs and holds the fabric on it. The flannel I used to use sometimes didn't hold some fabrics well and they would fall off.
Rubesgirl is offline  
Old 01-01-2014, 02:31 PM
  #33  
Sla
Member
 
Join Date: Aug 2013
Posts: 17
Default

I also use a flannel backed table cloth. I have had it up on the wall for about four years and it still holds the fabric in place without using pins. They are cheap and I got mine at a dollar store.
Sla is offline  
Old 01-01-2014, 05:10 PM
  #34  
Super Member
 
BettyGee's Avatar
 
Join Date: Oct 2010
Location: Colorado
Posts: 2,254
Default

I made mine out of poster boards from Hobby Lobby and covered it with white flannel. It has served me well for over five years.
BettyGee is offline  
Old 01-02-2014, 06:09 AM
  #35  
Senior Member
 
Join Date: May 2010
Location: Roodhouse, IL.
Posts: 367
Default

Originally Posted by Donnamarie View Post
Personally, I don't have a design wall but I have heard of people using flannel backed tablecloths for this purpose.
That is what I have used, and when you get a lot threads sticking to here, or not holding my blocks any more Just replace it. cheaper too..
Gayle's Quilts is offline  
Old 01-02-2014, 07:03 AM
  #36  
Junior Member
 
Join Date: Oct 2010
Location: Texas
Posts: 134
Default

I stapled a red checkered, flannel backed tablecloth that I got on clearance for 50 cents to the wall of my sewing room. It works great and an added bonus is that the red shows through and serves as sort of a grid. If you don't want to staple your walls, you could staple a tablecloth to your frame. I find that if you are careful removing the staples, the tiny holes are not noticeable. I used a regular desktop stapler and it holds fine.
auntlucy is offline  
Old 01-02-2014, 07:09 AM
  #37  
Super Member
 
Join Date: Jun 2012
Location: Sonoma County, CA
Posts: 4,299
Default

I use batting - when it gets too many strings I just use it up in a dark quilt! I have a row of nails that hang the batting from with binder clips, and then I tape the sides and bottom down with painter's tape. All very temporary and can be rolled up and stashed away (with work-in-progress still attached) if need be.

It works great until my big lumbering lummox of a dog comes by and wipes out half my blocks with her tail. Now I pin anything that's about waist-high or lower, LOL.
Sewnoma is offline  
Old 01-02-2014, 10:39 AM
  #38  
Super Member
 
Join Date: Mar 2008
Location: AZ and CT
Posts: 4,898
Default

I made the mistake of buying one of those miraculous design cloths, and it didn't work very long. Shortly after it quit working, I was spray basting a quilt and it dawned on me that the spray adhesive might work on a design wall - AND IT DOES! It lasts and lasts, too. And it doesn't leave adhesive goo on your blocks. I sprayed it on the offending miracle cloth, because it was the right size, but you could use anything that's the right size for you. Mine hangs on a dowel held up by large hooks.
JoanneS is offline  
Old 01-02-2014, 04:34 PM
  #39  
Senior Member
 
Join Date: Feb 2013
Location: SW Michigan
Posts: 329
Default

Originally Posted by Donnamarie View Post
Personally, I don't have a design wall but I have heard of people using flannel backed tablecloths for this purpose.
I have a huge flannel backed tablecloth hung on the wall. Have had a queen size log cabin (still in blocks) on it for several days and it held very well.
OldHairTwister is offline  
Old 01-02-2014, 05:48 PM
  #40  
Super Member
 
MacThayer's Avatar
 
Join Date: Jul 2011
Location: Nevada
Posts: 1,103
Default

Hmmmmm. . . I think I'll check into the vehicle headliner fabric. Never heard of using it before. Right now I have felt and my blocks are always falling off. It needs work!
MacThayer is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JulieB
Pictures
28
03-11-2018 06:20 AM
SouthPStitches
Main
10
07-30-2012 12:50 PM
Raggiemom
General Chit-Chat (non-quilting talk)
42
06-04-2011 07:43 AM
sondray
Links and Resources
0
05-04-2009 05:27 AM
Jim's Gem
Pictures
22
02-28-2009 12:40 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter