Tin Lizzie electrical power issue
#1
Member
Thread Starter
Join Date: Nov 2013
Location: SF Bay Area, Calif.
Posts: 3
Tin Lizzie electrical power issue
I have a Tin Lizzie 18LS and suddenly I lost all electrical connection. I have checked all power to the machine and everything is working properly including the surge protector. When I plug the machine directly into the outlet (bypass the surge protector) I still have no power at the machine. Is there a reset button somewhere or any ideas on what to check out further?
#2
Power Poster
Join Date: Mar 2013
Location: Corpus Christi, Tx.
Posts: 16,105
get your manual out and see where your reset button is. Often it's just a little tiny hole off to the side of your start button or in the area of. Often if you have a stiletto or darning needle all you have to do is push inside a couple times. BUT look at your manual.
#5
Senior Member
Join Date: Apr 2010
Location: Wichita Falls, TX
Posts: 640
Mine did that. I tried everything, too. Fortunately I bought from a reliable distributor. Turns out it was the main power supply. My husband is quite mechanical, so the distributor sent us a new power supply. My husband replaced it and it worked just fine. My Lizzie is a RAM. Hope yours is a quick fix.
#7
Member
Thread Starter
Join Date: Nov 2013
Location: SF Bay Area, Calif.
Posts: 3
Just wanted to take a minute to thank all of you for your responses. FYI - yes I did blow a fuse - twice - and we believe the issue is in the main circuit board now. Unfortunately I have to wait until tomorrow to get any answers as to cost and availability of the part.
Have any of you had any problem with your power cord?
Have any of you had any problem with your power cord?
Thread
Thread Starter
Forum
Replies
Last Post