Go Back  Quiltingboard Forums >
  • Main
  • Need help on figuring out a square >
  • Need help on figuring out a square

  • Need help on figuring out a square

    Thread Tools
     
    Old 06-11-2014, 07:43 AM
      #31  
    Power Poster
     
    Join Date: May 2008
    Location: MN
    Posts: 24,476
    Default

    Using this picture as a guide

    http://www.quiltmag.com/magazine/qui...nejuly13/echo/

    There are eight different combinations of fabrics in the strip sets.
    Each color group is cut the same direction.

    However, in some of the sets, the order from top to bottom is ABCDE, and the others with the same fabrics, the order is EDCBA.

    This would be a great quilt for a scrappy.
    bearisgray is offline  
    Old 06-11-2014, 08:23 AM
      #32  
    Member
     
    Join Date: Jun 2014
    Location: Claysville, PA
    Posts: 3
    Default

    I agree, with bearisgray. I think it is 5 colored pieces sewn together with a white piece sewn on the ends. So lets say you used 2" pieces of colored fabric then you may need 2 6" pieces of white. on the ends. After you have sewn all the pieces together, I think I would then place my fabric on a cutting mat on the 45 degree lines and place my ruler on the top where the white and color match leaving a 1/4 seam allowance and cut straight across so you have a 45 degree angle of white fabric. Then keep on cutting until you have enough rectangles. Then put them together in the pattern you wish. It looks like to me there are 8 rows with 4 blocks in each row. Just make sure your edges match.

    I hope this is right but that is what it looks like to me. Strip quilting.
    cin72
    cin72 is offline  
    Old 06-11-2014, 09:03 AM
      #33  
    Power Poster
     
    Join Date: May 2008
    Location: MN
    Posts: 24,476
    Default

    Like many things, there is probably more than one way to get the result one wants.

    I am now going to go downstairs and see if my diagram "works."
    bearisgray is offline  
    Old 06-11-2014, 11:27 AM
      #34  
    Super Member
     
    Join Date: Aug 2010
    Location: Michigan Thumb
    Posts: 1,956
    Default

    Originally Posted by Jingle
    I don't think it would be for a newbie, unless you have instructions with pictures. I have been quilting for 47-48 years and I would not try it without instructions and pictures.
    Good luck.
    Jingle--you started quilting as a baby *Ü*, good advice about needing good instructions.
    farmquilter is offline  
    Old 06-11-2014, 01:11 PM
      #35  
    Junior Member
     
    Join Date: May 2010
    Location: Eastern Kansas
    Posts: 118
    Default

    It looks like the quilt is made in strip consisting of starting off with a triangle of white fabric at the center of each strip. You can start off making strip sets (colored fabric) and cut the strips on a 45 degree angle by the width of the strip (tilt your head sideways and you should see a triangle). Then add a strip of the wider white strip and so on. It is an interesting quilt. The construction of each strip starts with the white triangle in the center of each strip and then the colored strip sent is added on each side of the triangle and so on.
    Kat2 is offline  
    Old 06-11-2014, 03:25 PM
      #36  
    Power Poster
     
    Join Date: May 2008
    Location: MN
    Posts: 24,476
    Default

    When I looked at the reference, I thought it looked like there were seam lines between the white triangles.
    bearisgray is offline  
    Old 06-11-2014, 03:47 PM
      #37  
    Super Member
     
    Join Date: Jul 2010
    Location: Tallmadge, OH
    Posts: 5,120
    Default

    Love the quilt pattern but can't help with the directions.
    matraina is offline  
    Old 06-11-2014, 04:44 PM
      #38  
    Junior Member
     
    Join Date: Apr 2009
    Posts: 203
    Default

    I know nothing about the math part. Being of simple mind. I am wondering since it was Hoffman fabrics that were used. Do you suppose it was made with their pre cuts? Very little to no cutting. Bali pops and a turnover, maybe? Just and idea.
    one-and-only is offline  
    Old 06-11-2014, 05:15 PM
      #39  
    Super Member
     
    Join Date: Sep 2011
    Location: Washington
    Posts: 4,001
    Default

    You all are so clever!
    sewbeadit is offline  
    Old 06-12-2014, 05:22 AM
      #40  
    Super Member
     
    Join Date: May 2012
    Location: Central Wisconsin
    Posts: 4,391
    Default

    Originally Posted by IraJane
    Could it be strips sewn together and then cut on the angle?
    I think this is the most economical use of fabric, and also the easiest way to construct this. Sew 5 WOF strips together. Sub-cut at the correct angle, and add the white triangles where needed.
    maviskw is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    RayneBowBrite
    Main
    9
    06-06-2011 08:51 PM
    Airwick156
    Main
    4
    05-29-2011 04:57 AM
    zoey
    Main
    7
    08-25-2010 03:41 AM
    janedennis
    Main
    2
    04-28-2010 11:46 PM
    Nepthys
    Main
    4
    09-14-2007 10:09 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter