watson's mom

I like it a lot and so what if it is a bit wavy, I haven't even finished mine. Very pretty and I really like your choice of fabrics. Thank you for sharing.

Tartan

Lovely! Spraying it and blocking it should fix it. I like to use a piece of foam core to block out small things. I use rust proof pins in the corners to put a little tension on the corners and edges. This holds it taut but be careful not to pull it out of square. Once it is completely dry it should be flat.

cathyvv

It's very pretty; maybe you can find a table that has a slight ripple in it...

I hope the blocking works!

Terricat

Very nice. Great idea for use of the new and renewed interest in the hexagons. Thank you for showing it. I can't see any crinkles in it!

grandmaNicole

Very nice .

Dolphyngyrl

Is that an embroidery design on the hexagons because it is really pretty

busy fingers

Pretty topper. I hope it flattens out for you.

rootyr

So pretty!

ManiacQuilter2

Hopefully blocking will resolve the problem. Good Luck.

CookyIN

Your center looks perfectly flat, and if so, I don't think the Insulbrite is your problem. Because of the way it's rippling, I think the binding is causing the problem. If you think so too, here's a link I found that may be able to help. Good luck -- it's a very pretty topper!

http://www.anniescatalog.com/quiltin...=611&type_id=T