That fabric release spray ----
#11
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,558
No, she's talking about a different product. There are a few brands on the market; Downy and Faultless make two. You can google "wrinkle releaser".
In my opinion, no. I had 2 t-shirts that sat in the dryer overnight. Decided to do a test. I hung them both on hangers, sprayed one with plain water, the other with the wrinkle release product. (Can't remember the name, I borrowed it from my neighbor.) When dry, they looked the same - both released most of the wrinkles.
In my opinion, no. I had 2 t-shirts that sat in the dryer overnight. Decided to do a test. I hung them both on hangers, sprayed one with plain water, the other with the wrinkle release product. (Can't remember the name, I borrowed it from my neighbor.) When dry, they looked the same - both released most of the wrinkles.
Last edited by Peckish; 08-18-2014 at 08:11 AM.
#13
Super Member
Join Date: Jun 2012
Location: Sonoma County, CA
Posts: 4,299
I don't like the smell that comes off of that wrinkle release stuff when I hit it with the iron so I don't use it with the iron anymore. It works good for getting wrinkles out of my work polo shirts; I just put it on a hanger, spritz, stretch, and done, so it's not going to waste.
For super stubborn wrinkles in cotton fabric, I soak it in water (not just get it wet, but submerge it for a good 5 minutes) and then toss it in the dryer until barely damp, and then press it. I think some stubborn wrinkles really need the fibers to absorb a lot of moisture and puff back up before it's going to be able to be ironed away.
Minor leftover wrinkles I usually don't worry about though. As long as it won't interfere with cutting or sewing the fabric, I just assume it'll come out (or be hidden) when I wash the completed quilt. So far that's worked out fine for me.
For super stubborn wrinkles in cotton fabric, I soak it in water (not just get it wet, but submerge it for a good 5 minutes) and then toss it in the dryer until barely damp, and then press it. I think some stubborn wrinkles really need the fibers to absorb a lot of moisture and puff back up before it's going to be able to be ironed away.
Minor leftover wrinkles I usually don't worry about though. As long as it won't interfere with cutting or sewing the fabric, I just assume it'll come out (or be hidden) when I wash the completed quilt. So far that's worked out fine for me.
#14
Senior Member
Join Date: Jan 2009
Location: Lincoln. MI
Posts: 491
I buy Best Press by the gallon, actually two gallons at a time from JoAnn's online. I wait until it goes on 1/2 price sale (about 35.00/gallon) AND JoAnn's is having their free shipping over a certain amount ordered. They do both a lot. The Fresh Linen Best Press is one of my very favorite quilting/sewing items.
#15
Power Poster
Join Date: Jun 2011
Location: Southern California
Posts: 19,127
Many of my friends love Best Press but it is too expensive for my budget. I can get any wrinkles out with using light body "Magic Sizing". As it says on the bright blue can, it does give light body without stiffness. Never had any type of flaking as I have with others spray starch. I can only get it at a Super Walmart store so I always buy all I can get off the shelves.
Thread
Thread Starter
Forum
Replies
Last Post
Kimmy P
General Chit-Chat (non-quilting talk)
14
03-26-2011 07:37 PM
boohoofish
General Chit-Chat (non-quilting talk)
44
01-18-2011 09:26 AM