Strip pieced log cabin blocks
09-03-2015, 07:31 AM
#102
Junior Member
Join Date: Jun 2011
Location: Frankfort KY
Posts: 252
Some of you asked how I did this. Pictures aren't the best. But you will get the idea.
I cut my strips 2 inches wide. You can use whatever size you want, just be consistant.
Pick the two strips you want for the foundation square.
I cut my strips 2 inches wide. You can use whatever size you want, just be consistant.
Pick the two strips you want for the foundation square.
Sew those two strips together
[ATTACH=CONFIG]169242[/ATTACH]
cut them into two inch segments (if using two inch strips)
[ATTACH=CONFIG]169243[/ATTACH]
Press open
[ATTACH=CONFIG]169244[/ATTACH]
Choose next strip and sew these segments to it
[ATTACH=CONFIG]169245[/ATTACH]
Cut into segments
[ATTACH=CONFIG]169246[/ATTACH]
Press, add next strip
[ATTACH=CONFIG]169247[/ATTACH]
To cut into segments line up your ruler on the bottom and the side
[ATTACH=CONFIG]169248[/ATTACH]
continue adding strips until you get the block the size you want.
[ATTACH=CONFIG]169250[/ATTACH]
[ATTACH=CONFIG]169242[/ATTACH]
cut them into two inch segments (if using two inch strips)
[ATTACH=CONFIG]169243[/ATTACH]
Press open
[ATTACH=CONFIG]169244[/ATTACH]
Choose next strip and sew these segments to it
[ATTACH=CONFIG]169245[/ATTACH]
Cut into segments
[ATTACH=CONFIG]169246[/ATTACH]
Press, add next strip
[ATTACH=CONFIG]169247[/ATTACH]
To cut into segments line up your ruler on the bottom and the side
[ATTACH=CONFIG]169248[/ATTACH]
continue adding strips until you get the block the size you want.
[ATTACH=CONFIG]169250[/ATTACH]
Thread
Thread Starter
Forum
Replies
Last Post
AngelinaMaria
Main
7
02-13-2013 07:49 AM
