Tearing fabric to straighten it
#31
Super Member
Join Date: Jan 2011
Location: Cottage Grove, MN
Posts: 2,807
Today I went to a meeting where I volunteer and I was asking what tasks needed to be done when my church sends middle-schoolers to volunteer a few times this summer. As I was verifying if the group still tore the flannel for receiving blankets ( did for a while, then cut instead for a while-different leaders and different ideas), I was told they still do tear. So I verified the width and length and the gal asked me if I knew about tearing the end of the flannel to straighten it before I started to cut the 30'' squares. I looked at her and asked her to explain. She said to tear down the length of the bolt and then snip a little bit at the beginning of that length and then tear across the width to make all of the cuts straight further down the line. I looked at her and said ok but told her I was confused. We both smiled so now I need to do one more step. We would sometimes tug on the flannel like described above to get it straight. It has something to do with the flannel curling after washing the receiving blankets which are only one layer.
#32
Power Poster
Thread Starter
Join Date: May 2008
Location: MN
Posts: 24,407
Today I went to a meeting where I volunteer and I was asking what tasks needed to be done when my church sends middle-schoolers to volunteer a few times this summer. As I was verifying if the group still tore the flannel for receiving blankets ( did for a while, then cut instead for a while-different leaders and different ideas), I was told they still do tear. So I verified the width and length and the gal asked me if I knew about tearing the end of the flannel to straighten it before I started to cut the 30'' squares. I looked at her and asked her to explain. She said to tear down the length of the bolt and then snip a little bit at the beginning of that length and then tear across the width to make all of the cuts straight further down the line. I looked at her and said ok but told her I was confused. We both smiled so now I need to do one more step. We would sometimes tug on the flannel like described above to get it straight. It has something to do with the flannel curling after washing the receiving blankets which are only one layer.
#34
Super Member
Join Date: May 2012
Location: Florida
Posts: 1,585
There are a lot of things I used to do that I won't do now -- it's a difference in methods used by manufacturers -- sometimes better than 'in the old days', sometimes not! I think it's just as important (maybe more so) for quilt fabric to be straight as it is for garment fabric. The difference is that you can be working with much larger pieces of fabric which makes it harder to work with.
Whether the receiving blankets roll or not may depend upon the type of "serging" that is done -- I've used a serger stitch with two spools of "wooly nylon" which is a much narrower stitch than standard serger stitches. In my case, the fabric was upholstery fabric and did not roll, but in a lighter-weight fabric, such as flannel, it would roll -- I'm no expert -- have just experienced some of this stuff!
Whether the receiving blankets roll or not may depend upon the type of "serging" that is done -- I've used a serger stitch with two spools of "wooly nylon" which is a much narrower stitch than standard serger stitches. In my case, the fabric was upholstery fabric and did not roll, but in a lighter-weight fabric, such as flannel, it would roll -- I'm no expert -- have just experienced some of this stuff!
Last edited by Jeanette Frantz; 06-09-2018 at 04:43 PM. Reason: additional content
#35
I tear a lot of fabric... and then press the edge right back into shape.
As for finding the straight grain: Can't you see the grain in your fabric? I can always find it and orient my pattern pieces in line with it.
If fabric seems skewed, such as with panels, just pull hard on the bias to get it back in place. It works. Then iron.
As for finding the straight grain: Can't you see the grain in your fabric? I can always find it and orient my pattern pieces in line with it.
If fabric seems skewed, such as with panels, just pull hard on the bias to get it back in place. It works. Then iron.
#36
Super Member
Join Date: Nov 2012
Location: Durango CO
Posts: 1,227
I have found the same thing. Wide backs I tear fast as far as possible & continue that way. It is all so very satisfying if you are frustrated about something.
#38
IF you are looking for the "straight of grain" on the fabric, you can snip a piece and PULL A Thread. This will tell you where to cut. If a fabric looks really off I'll do this. Yes, sometimes, like tearing one end is much larger than another, as it' how they make it now. Digital prints are the worst.
Remember most fabrics are made in a foreign country by workers who don't care about quality. NOTHING is done well as in past times. I also find that I have to really watch things if I'm using a digital print as they are really stretchy - EVEN if they "claim" to be 100% Cotton. I now either starch the heck out of them or press a very thin stabilizer on the back.
Good news is we're not "YET" paying $25-$30 a yard for this same lower quality as many quilters in other country's are paying.
Remember most fabrics are made in a foreign country by workers who don't care about quality. NOTHING is done well as in past times. I also find that I have to really watch things if I'm using a digital print as they are really stretchy - EVEN if they "claim" to be 100% Cotton. I now either starch the heck out of them or press a very thin stabilizer on the back.
Good news is we're not "YET" paying $25-$30 a yard for this same lower quality as many quilters in other country's are paying.
#39
Super Member
Join Date: Jan 2015
Posts: 2,867
IF you are looking for the "straight of grain" on the fabric, you can snip a piece and PULL A Thread. This will tell you where to cut. If a fabric looks really off I'll do this. Yes, sometimes, like tearing one end is much larger than another, as it' how they make it now. Digital prints are the worst.
Remember most fabrics are made in a foreign country by workers who don't care about quality. NOTHING is done well as in past times. I also find that I have to really watch things if I'm using a digital print as they are really stretchy - EVEN if they "claim" to be 100% Cotton. I now either starch the heck out of them or press a very thin stabilizer on the back.
Good news is we're not "YET" paying $25-$30 a yard for this same lower quality as many quilters in other country's are paying.
Remember most fabrics are made in a foreign country by workers who don't care about quality. NOTHING is done well as in past times. I also find that I have to really watch things if I'm using a digital print as they are really stretchy - EVEN if they "claim" to be 100% Cotton. I now either starch the heck out of them or press a very thin stabilizer on the back.
Good news is we're not "YET" paying $25-$30 a yard for this same lower quality as many quilters in other country's are paying.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
0
05-04-2011 11:55 AM