Juki DDL 227
#1
Super Member
Thread Starter
Join Date: Jul 2010
Location: DFW / Texas
Posts: 1,254
Juki DDL 227
Does anyone have this machine set up as s mid arm machine? Pros / cons on this machine please. I have an opportunity to purchase one for my frame. Any thoughts are appreciated.
#2
I looked this machine up online and it appears to be an industrial machine, with a separate 'head' and motor. This type of industrial set up is mounted in a heavy table, with the large motor hung on the back of the table. You turn the motor on first, from a switch on the table. These usually have a large oil reservoir underneath the table which wicks oil up into the machine. There is a bubble on the top of the machine that shows you the oil level.
I used to work commercially with these type machines and can't see any way it could be set up to work in a long arm frame.
I used to work commercially with these type machines and can't see any way it could be set up to work in a long arm frame.
#3
Super Member
Thread Starter
Join Date: Jul 2010
Location: DFW / Texas
Posts: 1,254
Thank you!
I looked this machine up online and it appears to be an industrial machine, with a separate 'head' and motor. This type of industrial set up is mounted in a heavy table, with the large motor hung on the back of the table. You turn the motor on first, from a switch on the table. These usually have a large oil reservoir underneath the table which wicks oil up into the machine. There is a bubble on the top of the machine that shows you the oil level.
I used to work commercially with these type machines and can't see any way it could be set up to work in a long arm frame.
I used to work commercially with these type machines and can't see any way it could be set up to work in a long arm frame.
It was listed as a LA quilting machine. I couldn’t find much info on it: thank you so much for your input!!!!
#4
#5
you could run a machine like this with a much smaller motor, it just wouldn't go as fast. You can even treadle them if you want a real workout!
They are very heavy machines, and would not be fun to be pushing around on a carriage, but they can work very nicely as a sit down quilting machine.
They are very heavy machines, and would not be fun to be pushing around on a carriage, but they can work very nicely as a sit down quilting machine.
#7
I"ll add - they are much easier to control if you get a servo motor instead of the older style clutch motor. I'd sewn an quite a few industrial in the past and they all had clutch motors. I'm very impressed with the control I have even at very slow speed with the servo motor.
Thread
Thread Starter
Forum
Replies
Last Post
misseva
For Vintage & Antique Machine Enthusiasts
4
11-29-2011 12:53 AM