Go Back  Quiltingboard Forums > Main > For Vintage & Antique Machine Enthusiasts
'Improved Eldredge Rotary' Mystery! >

'Improved Eldredge Rotary' Mystery!

'Improved Eldredge Rotary' Mystery!

Thread Tools
 
Old 06-03-2020, 06:00 PM
  #11  
Super Member
 
Join Date: Aug 2011
Location: Millville, NJ
Posts: 1,835
Default

Welcome. Looks like all you need is a treadle belt, sewing machine oil, "Eldredge Rotary" needles, and good instructions. If your lucky you'll have a few bobbins and bobbin case. Here are similar instructions but for electric instead of treadle.
https://www.sil.si.edu/DigitalCollec...0603/index.htm

Jon
jlhmnj is offline  
Old 06-05-2020, 04:52 PM
  #12  
Member
Thread Starter
 
Join Date: May 2020
Posts: 8
Default

Thanks for your reply! I looked everywhere for something to push or pull so I could see underneath the machine. When I draw up the main lid of the cabinet, the machine comes up from the inside and the front panel draws itself under the machine. Then, I 'saw' the button! Sweet!
jmerk is offline  
Old 06-05-2020, 04:56 PM
  #13  
Member
Thread Starter
 
Join Date: May 2020
Posts: 8
Default

Thanks for your encouragement! The website was helpful. Still searching for this machine's 'birth certificate'. Some machines I've seen online are so close in likeness to my machine but never exact. Meanwhile, I'll keep searching and learning all I can before getting down and serious in cleaning and restoring.
jmerk is offline  
Old 06-05-2020, 05:04 PM
  #14  
Member
Thread Starter
 
Join Date: May 2020
Posts: 8
Default

Hello, thank you for your help - I did find the release button - this machine really is in nice condition - just pretty dusty. Haven't identified her yet - I saw in the Smithsonian papers that there was a manual for a "Westers Electric" model that was almost a match except the 'nose' on the front ..tension regulator...my machine's does not protrude. I need to upload the pieced together remnants of the manual pages that were found in the cabinet drawers. Where would you suggest I do that on this thread? Do I make a new 'thread'? Do I make a pdf out of the twelve or so pics?
jmerk is offline  
Old 06-05-2020, 06:25 PM
  #15  
Member
Thread Starter
 
Join Date: May 2020
Posts: 8
Default

You are right - the manuals are pretty important and all of those who have access to the right ones for their machines are really fortunate to have them. Reading up and researching the historical part of restoring these vintage machines is half the fun! Either way, the anticipation of the 'before and after' is the best part!
jmerk is offline  
Old 06-13-2020, 10:48 AM
  #16  
Member
 
Join Date: Jun 2020
Posts: 7
Default

Here's a link to the scanned manual.

http://www.mediafire.com/file/mba03r...anned.pdf/file
+socoso is offline  
Old 02-07-2024, 05:45 AM
  #17  
Member
 
Join Date: Feb 2024
Posts: 1
Default I have a very similar one!

I’ve also been working to restore an old Eldredge and mine looks VERY similar to yours! How is yours coming along?

Mine has the serial number 37555 but otherwise looks identical almost.

images:
https://ibb.co/4NDnfgC
https://ibb.co/94W1D9d
https://ibb.co/zPzt3Lq
https://ibb.co/tZbjtY1
https://ibb.co/crG0fB9
https://ibb.co/XxKwtpJ
https://ibb.co/r4WsrzK
https://ibb.co/MkDHWh2
https://ibb.co/NVMcXH2
Joshchretien is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



FREE Quilting Newsletter