Singer 201 help
#1
Member
Thread Starter
Join Date: Dec 2020
Posts: 1
Singer 201 help
Hello all,
I have a quick question for you all. I was refinishing a singer 201 I recently acquired following the tutorial provided by Glen. Everything was going great till I started applying the shellac, when I applied it I did a little too much and it took the gold coloring off of one of the decals. My question, is should I attempt to repaint it and if so what paint should I use? Or do i attempt to just replace the decal with one from Keeler? Or just leave it as is? Any help would be appreciated
I have a quick question for you all. I was refinishing a singer 201 I recently acquired following the tutorial provided by Glen. Everything was going great till I started applying the shellac, when I applied it I did a little too much and it took the gold coloring off of one of the decals. My question, is should I attempt to repaint it and if so what paint should I use? Or do i attempt to just replace the decal with one from Keeler? Or just leave it as is? Any help would be appreciated
#2
Super Member
Join Date: Mar 2016
Posts: 2,826
I'd ask Glenn. He responds to questions posted on that tutorial you mention. Also, you can private message him. If you have a problem getting an answer, post here again. Maybe we can help you get a message to him or find other help. This is kind a specific question, so our regular posters may not have an answer.
bkay
bkay
#4
#6
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
201
Bkay I forgot to tell you I found an original extension board for your gifted machine. It even had the correct hardware to attach it to the machine. . It turned out to be a great little machine and I use it all the time.
#7
Super Member
Join Date: Mar 2016
Posts: 2,826
Thanks, Glenn for sharing.
bkay