Needing some basic information
#1
Super Member
Thread Starter
Join Date: May 2013
Location: Ballwin, MO
Posts: 4,256
Needing some basic information
I had an awakening when sewing along with Edyta Sitar's mystery last year. I just loved the basic way she made her units: For HSTs, cut squares, cut in half diagonally, sew together. For QSTs, cut squares, cut diagonally twice, sew together. My problem is, I can't find the basic information I need, which is, how to figure out what size square to start with when making these units. All the information I find when googling involves less straightforward methods, like making multiple units at a time, over-sized units for trimming down, etc.
Can anyone tell me how to determine the size of square to start with based on finished unit size, for HSTs when cutting in half diagonally, and for QSTs when cutting twice diagonally? Is there a formula? Thanks!
Can anyone tell me how to determine the size of square to start with based on finished unit size, for HSTs when cutting in half diagonally, and for QSTs when cutting twice diagonally? Is there a formula? Thanks!
#2
Super Member
Join Date: Jan 2014
Location: Central NM
Posts: 1,596
Here's a link to a great chart:
https://jacquelynnesteves.com/half-s...-and-tutorial/
and for qst
https://www.bonjourquilts.com/quarter-square-triangles/
https://jacquelynnesteves.com/half-s...-and-tutorial/
and for qst
https://www.bonjourquilts.com/quarter-square-triangles/
Last edited by Julienm1; 01-03-2021 at 09:59 AM.
#3
Super Member
Thread Starter
Join Date: May 2013
Location: Ballwin, MO
Posts: 4,256
Thanks, Julienm1! That first chart will be great; unfortunately, the second link is for a different QST method she prefers, so she doesn't give sizes for that basic, cut the square in 4 pieces method.
#4
Senior Member
Join Date: Jan 2012
Location: Michigan
Posts: 402
Thank you Joe'sMom for asking the question and Julienm1 for the links. I've always had a problem with qst dimensions.
My friend and I made a raffle quilt for our local Commission on Aging that required an insane amount of qst. Since we were making our own pattern we did all the math and I proceeded to cut hundreds (maybe millions or so it seemed) squares all the wrong size. One wouldn't think such a small error would cause so much pain but it did. I now have a guide that I sure wish I'd had at the time. Good news is the quilt turned out great--one we were very proud to own up to!
Grammahunt
My friend and I made a raffle quilt for our local Commission on Aging that required an insane amount of qst. Since we were making our own pattern we did all the math and I proceeded to cut hundreds (maybe millions or so it seemed) squares all the wrong size. One wouldn't think such a small error would cause so much pain but it did. I now have a guide that I sure wish I'd had at the time. Good news is the quilt turned out great--one we were very proud to own up to!
Grammahunt
#5
Senior Member
Join Date: Oct 2020
Posts: 706
For quarter square triangles, start with a square to which you add 1 1/4” to the finished size. If the finished size is 3”, start with a 4 1/4” square. For a 4” finished size, start with a 5 1/4” square. Etc. Many people start with a slightly larger square and trim to unfinished size after sewing.
#6
Super Member
Thread Starter
Join Date: May 2013
Location: Ballwin, MO
Posts: 4,256
Does your chart say that you make a 2" finished QST by starting with a 4 1/4" square, which you cut twice diagonally?
But I recently made 2" finished QSTs for the mystery, and Bonnie's directions said to start with a 4 1/4" square, which was then cut twice diagonally. So I think the above must refer to a different method (possibly the one that starts making QSTs by first making 'parent' HSTs), because following the above, I would have started with a 3 1/4" square, not a 4 1/4".
I guess I could experiment, following what is the apparent 'formula' Bonnie used -- double the size of the finished unit and add 1/4".
For quarter square triangles, start with a square to which you add 1 1/4” to the finished size. If the finished size is 3”, start with a 4 1/4” square. For a 4” finished size, start with a 5 1/4” square. Etc. Many people start with a slightly larger square and trim to unfinished size after sewing.
I guess I could experiment, following what is the apparent 'formula' Bonnie used -- double the size of the finished unit and add 1/4".
#7
Senior Member
Join Date: Oct 2020
Posts: 706
Here’s a chart so you don’t have to do the math.
Joe’s Mom: I rechecked the Week 2 instructions for the quarter square triangles and for what Bonnie called the “traditional rotary cutter math” my instructions show starting with a square which is 1 1/4” larger than the finished size. Maybe she made a correction or you are looking at a different method in her instructions.
Joe’s Mom: I rechecked the Week 2 instructions for the quarter square triangles and for what Bonnie called the “traditional rotary cutter math” my instructions show starting with a square which is 1 1/4” larger than the finished size. Maybe she made a correction or you are looking at a different method in her instructions.
#8
Super Member
Join Date: Dec 2017
Posts: 1,866
In the Grassy Creek Mystery, clue 2, for making 2" finished QSTs, Bonnie Hunter writes: "If you were working with traditional rotary cutting math, you'd start with 3 1/4'' squares." (The clue then uses strips, not squares, to make elements of the QST, rather than quartering a triangle.)
If you try the experiment, or use math, you will see that cutting a square along both diagonals and sewing it back together yields a square that is 3/4" smaller than the original square (so the finished size is 1.25" smaller than the original square).
If you try the experiment, or use math, you will see that cutting a square along both diagonals and sewing it back together yields a square that is 3/4" smaller than the original square (so the finished size is 1.25" smaller than the original square).
#9
Super Member
Thread Starter
Join Date: May 2013
Location: Ballwin, MO
Posts: 4,256
SuzSLO, thank you for following up! I could have sworn I cut 4 1/4" squares for clue 2, but my directions, which I printed out on the clue day, also say what you indicated! Thank you for straightening me out! I was in such a tizzy about it, LOL.
edit
Thank you, as well, Playhiker. (We may all have our posts deleted since we are mentioning actual sizes and quoting the mystery text, but I do thank you both for your help!)
edit
Thank you, as well, Playhiker. (We may all have our posts deleted since we are mentioning actual sizes and quoting the mystery text, but I do thank you both for your help!)
#10
Super Member
Join Date: Mar 2010
Location: Ridgefield WA
Posts: 7,765
If you are doing 4 at a time with same colors (or 8 at a time) there are 2 helpful instructions for those!
https://www.pinterest.com/pin/222928250277417183/ = 4 at a time
https://blocloc.com/wp-content/uploa...rt-for-HST.pdf = 8 at a time
https://www.pinterest.com/pin/222928250277417183/ = 4 at a time
https://blocloc.com/wp-content/uploa...rt-for-HST.pdf = 8 at a time