Davis Vertical Feed Treadle

Old 03-16-2020, 06:09 PM
  #1  
Member
Thread Starter
 
Join Date: Aug 2019
Location: Portland, Oregon
Posts: 34
Question Davis Vertical Feed Treadle

I just bought a Davis Vertical Feed treadle machine for $15. She had said it was one with a hand crank, but was mistaken. For the price I took it anyway! When I saw it I thought it would be another for the Evapo-Rust line, but after putting oil in all the holes and soaking the oil pad for the shuttle it began to move smoothly and quietly. It will still get things soaked a bit, but that seems to actually be minor. I downloaded a manual, but it was for the Vertical High Arm and they have differences, such as what is the small lever above the presser foot lever? Is it possible to put a Hand crank other than the new type on this machine? If not how have others found the new type. I donít have a treadle stand to put it in.
Manual?
Hand crank?
Reginaromsey is offline  
Old 03-16-2020, 06:43 PM
  #2  
Senior Member
 
Join Date: Jan 2015
Location: Wisconsin
Posts: 451
Default

The extra lever above the presser foot lever is used when sewing thick fabric sandwiches:quilts , woolens, etc. There are some important things to know about removing the faceplate... Don't do it until you've read the manual/seen the you tube videos.
I believe Davis hand cranks are very rare. Davis also made and badged the VF for other sellers, so finding a cabinet/irons wont be difficult. One of the Minnesota models, H?, and a few others. There is a Davis VF group on Facebook.
WIChix is offline  
Old 03-17-2020, 06:08 AM
  #3  
Super Member
 
leonf's Avatar
 
Join Date: May 2016
Location: near Topeka kansas
Posts: 4,494
Default

WIChix is so right about the faceplate. approach with caution. Getting it back on is a test in dexterity and patience..

Yes, Davis cranks are rare and the new repros are for Singers. Save your money. They won't help you.

Great machines for many layers.of fabric.
Attached Thumbnails Click image for larger version

Name:	davis face plate b.jpg
Views:	149
Size:	652.0 KB
ID:	623292   Click image for larger version

Name:	davis vsm handcrank crank b.jpg
Views:	106
Size:	223.9 KB
ID:	623293  
leonf is offline  
Old 03-17-2020, 06:13 AM
  #4  
Super Member
 
leonf's Avatar
 
Join Date: May 2016
Location: near Topeka kansas
Posts: 4,494
Default

PS Handcrank pictured is on a Davis, but not a vertical feed. I haven't tried to HC the Davis. Mine came on a treadle.

And BTW if you find a treadle base, the drive wheel is on a cone shaped axle. That was a surprise to me.
Attached Thumbnails Click image for larger version

Name:	davis vf b.jpg
Views:	75
Size:	329.8 KB
ID:	623294   Click image for larger version

Name:	davis drive  cone b.jpg
Views:	57
Size:	343.0 KB
ID:	623295  
leonf is offline  
Old 03-18-2020, 08:06 PM
  #5  
Member
Thread Starter
 
Join Date: Aug 2019
Location: Portland, Oregon
Posts: 34
Default

Thank you! I’ve found the manual online that was so helpfully located!
Reginaromsey is offline  
Old 03-19-2020, 06:19 AM
  #6  
Super Member
 
leonf's Avatar
 
Join Date: May 2016
Location: near Topeka kansas
Posts: 4,494
Default

Since we are dealing with ancient tech here... Regina, did you know that some early music boxes with changeable "records" were made by Regina. Beautiful things..

be sure and oil all the moving parts under the bed and what you can reach in the pillar.
leonf is offline  
Old 04-27-2021, 02:46 PM
  #7  
Member
 
Join Date: May 2019
Posts: 3
Default Identification Help Needed

I recently purchased this Davis NVF Treadle at a local auction for $6.90. It is in wonderful shape in all aspects! It came with the manual and many attachments; 7 bobbins and two shuttles. So far I haven't tried the second on in the machine as yet. Would someone be able to help date and identify using the pictures I've attached?
Thanking ALL in advance for any shared help .

Attached Thumbnails Click image for larger version

Name:	m_Davis Treadle (16).jpg
Views:	25
Size:	39.6 KB
ID:	633120   Click image for larger version

Name:	m_Davis Treadle (1).jpg
Views:	27
Size:	57.6 KB
ID:	633121   Click image for larger version

Name:	m_Davis Treadle (6).jpg
Views:	52
Size:	77.5 KB
ID:	633122   Click image for larger version

Name:	m_Davis Treadle (12).jpg
Views:	47
Size:	58.4 KB
ID:	633123   Click image for larger version

Name:	m_Davis Treadle (5).jpg
Views:	45
Size:	53.6 KB
ID:	633124  

marymalheim@yahoo.com is offline  
Old 04-29-2021, 12:29 AM
  #8  
Super Member
 
Join Date: Aug 2011
Location: Millville, NJ
Posts: 1,827
Default

Good deal for $6.90. Someone marked it was made in 1917. The 7 digit serial number on the front slide plate would be needed to see how accurate this is. Davis NVF or new vertical feed is the make and model.
jlhmnj is offline  
Old 05-25-2021, 08:32 AM
  #9  
Member
 
Join Date: May 2019
Posts: 3
Default Davis NVF

The thread tension knob has 1915 stamped on it....


Originally Posted by jlhmnj View Post
Good deal for $6.90. Someone marked it was made in 1917. The 7 digit serial number on the front slide plate would be needed to see how accurate this is. Davis NVF or new vertical feed is the make and model.
marymalheim@yahoo.com is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


FREE Quilting Newsletter