Crooked stitches with Janome MC8200
#31
Member
Thread Starter
Join Date: May 2019
Posts: 26
@donna13350 I've just come back to this very useful thread and I missed your post earlier. Do you mean foot pressure or height? On the Janome I can adjust foot pressure but not height above the dogs..
@Ladydiana Yes, I was using Accufeed. It was actually a bit better with the basic walking foot!
@Ladydiana Yes, I was using Accufeed. It was actually a bit better with the basic walking foot!
#32
Super Member
Join Date: Jul 2008
Location: Keller, TX
Posts: 1,937
I have the Janome HD9 V2 and love it. Straight stitch only, larger bobbin. There is a youtube video out there that is titled why I purchased the Janome HD9 versus the JUKI 2010Q.
The HD9 v2 has some better features. Good luck on your quest.
Some of your stitches look perfect to me. Perhaps your batting is affecting your stitches. Test on just two pieces of fabric.
Also, try moving your needle where your needle comes down closest to where your pressure foot comes down over the "most" feed dogs. It is hard to explain this, except to say,
The pressure in the feed dogs helps keep everything snug while your piece is moving through the machine . Putting your needle closer to the right side, rather than in the middle helps with less movement under the needle. I will see if I can find the video on The QUILT Show that covers this, I'm not very good at explaining.
The HD9 v2 has some better features. Good luck on your quest.
Some of your stitches look perfect to me. Perhaps your batting is affecting your stitches. Test on just two pieces of fabric.
Also, try moving your needle where your needle comes down closest to where your pressure foot comes down over the "most" feed dogs. It is hard to explain this, except to say,
The pressure in the feed dogs helps keep everything snug while your piece is moving through the machine . Putting your needle closer to the right side, rather than in the middle helps with less movement under the needle. I will see if I can find the video on The QUILT Show that covers this, I'm not very good at explaining.
#33
Super Member
Join Date: Jul 2008
Location: Keller, TX
Posts: 1,937
I found the video. It is by Susan Cleveland. It is called Secretsofimpeccablepiecingdemo (all run together) on Youtube.. it is about 4 miniutes into the video.
Susan explains how to.get your needle to the right, so your quarter inch is over the feed dogs for bette control. Susan also explains this on a the quilt show program.
hope this helps.
Susan explains how to.get your needle to the right, so your quarter inch is over the feed dogs for bette control. Susan also explains this on a the quilt show program.
hope this helps.
#34
Member
Thread Starter
Join Date: May 2019
Posts: 26
#35
Super Member
Join Date: Jul 2008
Location: Keller, TX
Posts: 1,937
My information was for Piecing I don't know if this also works for free motion, to have your needle to the right with your fabric under the right feed dog. Some people Freemotion Quilt with their feet dog Up, but most folks have their feet dogs down.
#36
Super Member
Join Date: Jul 2008
Location: Keller, TX
Posts: 1,937
My information was for Piecing I don't know if this also works for free motion, to have your needle to the right with your fabric under the right feed dog. Some people Freemotion Quilt with their feet dog Up, but most folks have their feet dogs down.
#37
Super Member
Join Date: Jan 2015
Posts: 2,867
My Singer 301s are straight stitch only and sew a straight line. The straightest stitching machine I have is 15 clone made for Montgomery Wards - probably from the 50s. I bet my 1949 Necchi is, too, but I have never checked it. I agree that you need a straight stitch machine to get a perfectly straight stitch.
I had a Pfaff that wiggled when I didn't want it too welded. It sews straight now.
I had a Pfaff that wiggled when I didn't want it too welded. It sews straight now.