Go Back  Quiltingboard Forums >
  • Main
  • A Warning:  Incorrect directions for amount of fabric >
  • A Warning: Incorrect directions for amount of fabric

  • A Warning: Incorrect directions for amount of fabric

    Thread Tools
     
    Old 07-17-2022, 01:06 PM
      #1  
    Super Member
    Thread Starter
     
    Join Date: Jul 2010
    Location: Massachusetts
    Posts: 1,097
    Default A Warning: Incorrect directions for amount of fabric

    I have never come across this problem before. The amounts of fabric the directions had me get for a queen size quilt are far, far more than is need. I have a pattern from a 2010 McCall's Quick Quilts called Frosty Afternoon. The one printed in the magazine was throw size which I made.

    They also gave a link to get the same pattern in Queen Size. Well, I finally got around to making the larger one, ordered the fabrics and started cutting.

    WOW. They said I needed 1 1/8 yds of six different fabrics. Well, as most websites only let you get fabric by the yard, I had to get 1 1/2 yards of most them. When I cut the first fabric I had so much fabric left over I had to double and triple check the instructions as I was thinking it was my error.

    Looking back at the throw size quilt it says to get 2 1/8 -2 1/4 yds total of six different fabrics. Whoever converted the directions for the bigger quilt certainly didn't do the calculations correctly.

    I only need 3/4 yd to get the cuts I need from each fabric. I have enough to make two queen size quilts. This is a lot of money wasted. I don't know if I want to make two quilts exactly the same but will have to come up with a way not to waste all this material.

    In the future I'll think I'll have to check the directions for the different fabrics so this doesn't happen again.

    Has anyone else ever run into this problem?
    selm is offline  
    Old 07-17-2022, 02:24 PM
      #2  
    Gay
    Super Member
     
    Join Date: May 2012
    Location: S.E. Queensland, Australia
    Posts: 1,487
    Default

    I don't understand how 6 fabrics of 2 1/8 yds would only make a throw size quilt, when almost half the amount of fabric is much too much for the queen size, whether you had to buy a little more. I saw the pattern for the QS quilt and the amount seems fine to me. Maybe I'm missing something, as for such a large quilt I usually plan on 12 or 13 yds depending on the pattern.
    Gay is offline  
    Old 07-17-2022, 02:43 PM
      #3  
    Super Member
     
    tallchick's Avatar
     
    Join Date: Sep 2011
    Location: Ohio
    Posts: 2,991
    Default

    I think fabric recommendations are as wide and varied as patterns are written. Sometimes they call for way too much and sometimes there is very little room for error. I always order at least a quarter yard extra to allow for errors. Make pillows or another quilt.
    tallchick is offline  
    Old 07-17-2022, 03:34 PM
      #4  
    Super Member
     
    Join Date: Jul 2013
    Location: Houston, TX
    Posts: 9,707
    Default

    Originally Posted by tallchick
    I think fabric recommendations are as wide and varied as patterns are written. Sometimes they call for way too much and sometimes there is very little room for error. I always order at least a quarter yard extra to allow for errors. Make pillows or another quilt.
    I agree. I always order a bit more and then use it wherever needed. Make pillows, shams, you can even piece your backing out of the fabric you have left. I've used scraps to bind quilts many times and am currently using my leftovers to make a piano key border. Lots of options for the left over fabrics.
    cashs_mom is offline  
    Old 07-17-2022, 03:47 PM
      #5  
    Senior Member
     
    Join Date: Oct 2020
    Posts: 706
    Default

    One way to do a quick check on the fabric requirements is to do the math. The suggested fabric for your pattern was 1 1/8 of 6 fabrics. That is a total of 243 inches. With 40 usable inches, that much fabric should give you a maximum of 9,720 square inches (less after accounting for seam allowances).

    A standard queen size quilt is 90 by 108 inches. Which equals 9,720 square inches. This, if anything, ore fabric will be needed to complete a single queen quilt top.
    SuzSLO is offline  
    Old 07-17-2022, 04:26 PM
      #6  
    Super Member
     
    Join Date: Jul 2019
    Location: northern minnesota
    Posts: 2,480
    Default

    I think the amount of fabric would make a smaller than usual, queen-sized quilt. If the pattern calls for 6 fabrics of 1 1/8 yards each, that is only a total of 6 3/4 yards. Do you have the dimensions for the finished quilt? With the seam allowances, it doesn't seem like 6 3/4 yards would make a queen-sized quilt unless it is just a coverlet and just maybe. My book says I would need between 6 1/4 and 8 1/2 yards just for the backing depending how much drop on each side and if you want a pillow tuck. As you have seams in the top usually, you would need more.
    OK, so I found the pattern, finished size is 91 1/2 inch's by 99 1/2 inches and there is a 10-inch border on it. so, we are good!

    Last edited by sewingpup; 07-17-2022 at 04:33 PM.
    sewingpup is offline  
    Old 07-17-2022, 07:13 PM
      #7  
    Power Poster
     
    dunster's Avatar
     
    Join Date: Mar 2009
    Location: Lake Elsinore, CA
    Posts: 15,239
    Default

    Looking at the pattern, it calls for fifteen 8.5" squares to be cut out of each of the 6 fabrics. If your fabric is very wide you might be able to get 5 squares in each width of fabric, but this would require 42.5" of usable width. Most fabrics don't support that. But if that was the case, you could get by with only 25.5" of fabric for the 15 squares.

    Most fabric will provide no more than 40" of usable width, so it's more likely that someone would be able to get only 4 squares in one WOF, meaning that they would need another 8.5" in length, or 34". If you actually need 34" of fabric, you may not be able to get it from one yard, given that you may want to pre-wash your fabric (and it could shrink) or your fabric may not be cut straight when you buy it. The pattern maker has to take these things into account when figuring yardage.

    So - I side with the pattern writer on this one.
    dunster is offline  
    Old 07-18-2022, 03:18 AM
      #8  
    Super Member
     
    Join Date: Sep 2010
    Location: Delaware
    Posts: 1,019
    Default

    Since you have so much left over fabric, sew it together and you have a backing for the top you just made.
    Lena1952 is offline  
    Old 07-18-2022, 07:21 AM
      #9  
    Super Member
     
    Join Date: May 2017
    Location: Sunny Florida
    Posts: 4,431
    Default

    There was probably a typo in the amount of fabric needed. Perhaps just a slip of the fingers on the key board. Most likely a correction was printed for the pattern.
    Rhonda K is offline  
    Old 07-18-2022, 01:17 PM
      #10  
    Super Member
    Thread Starter
     
    Join Date: Jul 2010
    Location: Massachusetts
    Posts: 1,097
    Default

    The queen size is 91.5 x 99.5

    The pattern calls for cutting 15, 81/2" squares of each of six fabrics. That's 90. 8" finished squares. You lay them out 9 per row and 10 rows(90 squares). That's 72 x 80 in the middle of the quilt.

    You then add a 10" border(20" added width and 20" added length) giving you a total of 92 x 100 sized quilt.

    You only need 27" of fabric (my fabrics are 43" wide) to get three strips which give you slightly more than five 8 1/2" blocks. So I basically only needed 3/4 yard of fabric to get the 15 blocks. They said to get 1 1/8 yds per color -- too much - even if you got 1 yard per color you don't need that 1/8 yd. Most of the vendors I used to get the collection of fabrics I wanted only dealt in whole or half yards so I ended up getting 1.5 yards(1/2 yard too much) of each for most of it. I paid for nine yards when I could have gotten 4.5 yards(using 3/4 yd as bare minimum) or 6 yards if I used one yard per fabric.

    I haven't figured it exactly but at today's prices that's a lot of money(to me anyway) for fabric I don't need or want. Plus I made the borders and binding the same as one of the six fabrics used in the blocks.

    Thanks for the suggestions about using the excess fabric as part of the backing but I've already bought fabric for that also.

    It's a very easy, basic layout pattern and I'll enjoy making this as I did the throw years ago. Just wished the fabric was working out better. I'll eventually figure our a way to use the excess.

    Sure hope my daughter likes this quilt.

    Last edited by selm; 07-18-2022 at 01:25 PM.
    selm is offline  

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter