Quiltingboard Forums

Go Back  Quiltingboard Forums >
  • Main
    • Janome quarter inch foot >

  • Janome quarter inch foot

    • Register
    FAQ
    Calendar
    Today's Posts
    Search
    Vendor Directory

    Janome quarter inch foot

    Page 2 of 2
    1
    2
    Thread Tools
     
    Old 05-30-2023, 05:47 AM
      #11  
    Power Poster
     
    Join Date: Nov 2009
    Location: Mableton, GA
    Posts: 11,682
    Default
    Hers is a straight stitch machine with narrow feed dogs. Just take this into consideration if your feed dogs are wide.
    Stitchnripper is offline  
    Reply
    Old 05-30-2023, 07:47 AM
      #12  
    Super Member
     
    KalamaQuilts's Avatar
     
    Join Date: May 2011
    Location: SW Washington USA
    Posts: 4,886
    Default
    Originally Posted by Onebyone
    hated that flange so took the pliers to it and broke flange off,

    I did the same thing. The flange 1/4 foot always gave me wider then 1/4 inch.
    Me three.
    Although now I use the clear open toe foot for better visibility, and use the 8.6 needle setting for 1/4".
    KalamaQuilts is offline  
    Reply
    Old 05-31-2023, 03:02 AM
      #13  
    Super Member
    Thread Starter
     
    Join Date: Feb 2014
    Location: Davenport, Iowa
    Posts: 4,357
    Default
    Janome 1/4 inch Seam Foot O Without Guide 202313104 I finally found one from Pocono Sew and Vac that snaps on and wasn't terrible expensive. Thought about breaking off the flange on the one I have, but as soon as I do that I may need it for something (??).
    Also ordered a screw for my needle plate, as one I have now isn't the proper one and some Janome bobbins. I'll let you know how this one does when it arrives.
    LGJARN52 is offline  
    Reply
    Old 05-31-2023, 05:11 AM
      #14  
    Super Member
     
    OurWorkbench's Avatar
     
    Join Date: Mar 2015
    Location: Denver, CO
    Posts: 4,651
    Default
    Originally Posted by lindaschipper
    Janome 1/4 inch Seam Foot O Without Guide 202313104 I finally found one from Pocono Sew and Vac that snaps on and wasn't terrible expensive. Thought about breaking off the flange on the one I have, but as soon as I do that I may need it for something (??).
    Also ordered a screw for my needle plate, as one I have now isn't the proper one and some Janome bobbins. I'll let you know how this one does when it arrives.
    Isn't the one you ordered for a 9mm stitch width machine? Isn't the MC6500 a 7mm stitch width machine?

    Janey - Neat people never make the exciting discoveries I do.
    Not affiliated with off-site link(s)

    OurWorkbench is offline  
    Reply
    Old 05-31-2023, 06:21 AM
      #15  
    Super Member
     
    Quiltwoman44's Avatar
     
    Join Date: Nov 2020
    Location: USA
    Posts: 2,366
    Default
    yes, it must fit your machine.... they are different , so check please before purchasing.
    Quiltwoman44 is offline  
    Reply
    Old 05-31-2023, 09:41 AM
      #16  
    Junior Member
     
    Join Date: Aug 2010
    Posts: 111
    Default
    Originally Posted by lindaschipper
    Janome 1/4 inch Seam Foot O Without Guide 202313104 I finally found one from Pocono Sew and Vac that snaps on and wasn't terrible expensive. Thought about breaking off the flange on the one I have, but as soon as I do that I may need it for something (??).
    Also ordered a screw for my needle plate, as one I have now isn't the proper one and some Janome bobbins. I'll let you know how this one does when it arrives.
    I have a Janome 8200 QC and it is a 9mm stitch machine and the foot listed above would not work.
    Marcy J. is offline  
    Reply
    Old 05-31-2023, 11:55 AM
      #17  
    mkc
    Super Member
     
    Join Date: Jan 2013
    Posts: 1,152
    Default
    Originally Posted by OurWorkbench
    Isn't the one you ordered for a 9mm stitch width machine? Isn't the MC6500 a 7mm stitch width machine?
    Good catch - if you click on "all machines this will work with", the MC6500 does not show up. Only the 9mm machines do.
    mkc is offline  
    Reply
    Old 06-01-2023, 06:02 AM
      #18  
    Super Member
     
    Join Date: Jul 2008
    Location: Keller, TX
    Posts: 1,977
    Default
    Be sure to check with dealer on fit for your machine. Most of the foot listings are for 9mm Janomes.
    Lady Diana is offline  
    Reply
    Page 2 of 2
    1
    2
    Back to Subforum
    Main
    View Next Unread
    Thinning out the stash by making small household items

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts
    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off


    FREE Quilting Newsletter