Plastic templates?
#21
Member
Join Date: Apr 2007
Location: Valparaiso
Posts: 17
>>I did read something a while back about someone going to Home Depot or Ace Hardware (can't remember which) and having them cut out acrylic/plex glass for them to make uber cheap templates for quilting block. Has anyone else done this?
#22
Member
Join Date: Nov 2006
Posts: 41
Pat B,
Yes, Ace Hardware still does the cutting for you, of different thicknesses of acrylic plastic, or glass or whatever. I got a piece not too long ago to cover the outside lower part of a French door. My shephard likes to "knock" on the door when she wants to come in & I was afraid she might put her paw through one of the glass panes, it works very well. They are very accomodating & helpful to get you what it is you want, & as you mentioned are very precise. They would probably drill a hole or holes for you also, to mark seam allowances, or for hanging. They seem to always go the extra mile for customers, especially the ladies who may not always know exactly what it is they want or need for the job. 8) Betty
Yes, Ace Hardware still does the cutting for you, of different thicknesses of acrylic plastic, or glass or whatever. I got a piece not too long ago to cover the outside lower part of a French door. My shephard likes to "knock" on the door when she wants to come in & I was afraid she might put her paw through one of the glass panes, it works very well. They are very accomodating & helpful to get you what it is you want, & as you mentioned are very precise. They would probably drill a hole or holes for you also, to mark seam allowances, or for hanging. They seem to always go the extra mile for customers, especially the ladies who may not always know exactly what it is they want or need for the job. 8) Betty
#23
I went to my local Ace hard ware and had the cut some differnt widths of pelxi glass for cutting strip. I got from 2 1/2 inches up to a 9 inch wide pieces going up in 1/2 inch increments. Some pieces I did not pay for because they were able to get them from scrapes ( the smaller with ones) I got a total of 14 sizes and cost me $6
#24
I think I've posted on this before........I use poster board...I make two of each I need.........some I save with the pattern and others I toss.
Other people save all types of plastic to cut templates'.........the plastic sheet in the bacon all size lids and any other piece s of plastic
Other people save all types of plastic to cut templates'.........the plastic sheet in the bacon all size lids and any other piece s of plastic
#28
Great suggestions. :D I think I'm gonna try getting some plexi glass cut out. Well, at least for geometric shapes anyways. If I try out cutting out sqaures and rectangles, most likely I won't cut it exactly accurate and my quilt would come out looking funny. I'll have to check if our Ace Hardware cuts plexi-glass...I'm sure they do, but then again I thought our Super Wal-Mart was going to have a huge fabric section like every other Super Wal-Mart I've been to (ended up being 3/4ths smaller than the one the old store had). So you never know.
By the way, how big are the plastic template sheets you can buy at Wal-Mart?
By the way, how big are the plastic template sheets you can buy at Wal-Mart?
Thread
Thread Starter
Forum
Replies
Last Post
JudyTheSewer
Main
8
06-30-2012 01:57 PM
craftybear
Links and Resources
0
12-30-2010 11:35 PM