Go Back  Quiltingboard Forums >
  • Main
  • Fabric Question for a math whiz >
  • Fabric Question for a math whiz

  • Fabric Question for a math whiz

    Thread Tools
     
    Old 03-02-2013, 04:18 PM
      #11  
    Super Member
     
    Join Date: May 2011
    Location: Pacific NW
    Posts: 9,447
    Default

    36" = 1 yard
    27" = 3/4 yard
    18" = half yard
    9" = quarter yard

    I've NEVER been to any quilt shop or fabric store where you could not ask for inches instead of yardage. In other words, if you need 20 inches, they should be able to either cut 20 inches, or tell you the closest fraction, which in this case you are correct, it would be 5/8. In other words, don't be afraid to say "I need 20 inches, what's the closest to that you can cut?"
    Peckish is offline  
    Old 03-02-2013, 04:27 PM
      #12  
    Power Poster
     
    RedGarnet222's Avatar
     
    Join Date: Jan 2009
    Location: Reno, Nv
    Posts: 16,524
    Default

    I guess I am the odd man out because I would first cut the 12 inch width off the fabric and cut it down to the 2 inch widths. This is my reasoning. The long twelve inches need to be stable, so the length is the most stable side of the fabric. The fabric would give you 20 strips on the first strip after being cut down, You then cut the remaining strip only partially, so you have enough to make up the 8 remaining needed 2 inch strips. Which if it is doubled would be four inches. Then use the width of fabric for the other strips that aren't so long.

    Last edited by RedGarnet222; 03-02-2013 at 04:29 PM.
    RedGarnet222 is offline  
    Old 03-02-2013, 07:22 PM
      #13  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    Girlfriend, you're right on track. Half a yard would be 18", which is not enough. I always buy more than I think I will need to allow for crooked cutting and my mistakes, so I would up the yardage to 3/4 of a yard (24"). Although 5/8 of a yard is adequate (22.5"), it doesn't allow for mistakes. I always go up a little more and add any scraps to my stash.

    If you have a calculator, an easy way to figure out how many inches is in 5/8 of a yard is to do this: 36 times 5 divided by 8. The result is the number of inches in 5/8 yard. This works for all fractions because a yard is always 36.
    Prism99 is offline  
    Old 03-02-2013, 08:11 PM
      #14  
    Junior Member
    Thread Starter
     
    Join Date: Oct 2012
    Location: at the foot of the Ouichita Mountains, SE Oklahoma
    Posts: 273
    Default

    wow...lots of ways to do the same thing. I finally did the suggestion that said I should measure the 12-inch wide strip and cut the 2-inx12's from that.

    Thanks for all the ways of doing it...and yes, it is a good idea to print it all out and put it in a folder.

    Thanks to everyone,

    Dray
    dray965 is offline  
    Old 03-02-2013, 08:30 PM
      #15  
    Super Member
     
    GrannieAnnie's Avatar
     
    Join Date: Aug 2010
    Location: S. W. Indiana
    Posts: 7,484
    Default

    Originally Posted by Prism99
    Girlfriend, you're right on track. Half a yard would be 18", which is not enough. I always buy more than I think I will need to allow for crooked cutting and my mistakes, so I would up the yardage to 3/4 of a yard (24"). Although 5/8 of a yard is adequate (22.5"), it doesn't allow for mistakes. I always go up a little more and add any scraps to my stash.

    If you have a calculator, an easy way to figure out how many inches is in 5/8 of a yard is to do this: 36 times 5 divided by 8. The result is the number of inches in 5/8 yard. This works for all fractions because a yard is always 36.

    I always allow at least a quarter of a yard for crooked cutting. And don't mind at all getting at least a half yard extra. For all those future tissue holders I make.
    GrannieAnnie is offline  
    Old 03-03-2013, 01:31 AM
      #16  
    Super Member
     
    Girlfriend's Avatar
     
    Join Date: Sep 2012
    Location: San Clemente, CA
    Posts: 1,211
    Default

    Originally Posted by Prism99
    Girlfriend, you're right on track. Half a yard would be 18", which is not enough. I always buy more than I think I will need to allow for crooked cutting and my mistakes, so I would up the yardage to 3/4 of a yard (24"). Although 5/8 of a yard is adequate (22.5"), it doesn't allow for mistakes. I always go up a little more and add any scraps to my stash.

    If you have a calculator, an easy way to figure out how many inches is in 5/8 of a yard is to do this: 36 times 5 divided by 8. The result is the number of inches in 5/8 yard. This works for all fractions because a yard is always 36.
    I've always wondered how to figure the number of inches in each of the cutting increments...the eights are the hardest to figure out. And yes, I usually had more yardage in case of mistakes, or if I have to prewash. Sounds like you have a degree in math, or you've worked in a quilt store. Thanks!
    Girlfriend is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    ptquilts
    General Chit-Chat (non-quilting talk)
    5
    12-10-2016 04:58 PM
    Sharon - NC
    Main
    8
    05-07-2015 03:57 AM
    jetnica
    Main
    5
    03-31-2010 05:54 PM
    sondray
    Links and Resources
    0
    08-05-2009 04:36 AM
    crkathleen
    Main
    3
    05-28-2009 07:55 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter