Unusual tool?
#11
This is a companion thread to yours. Has a lot of non-sewing items used in the sewing room. Some really great suggestions. http://www.quiltingboard.com/main-f1...g-t127919.html
I use my electric manicure kit to sand down the little nick in spools of thread are. My thread has gotten stuck in that little slit and then does not feed right to the bobbin. So, I just file it down.
I use my electric manicure kit to sand down the little nick in spools of thread are. My thread has gotten stuck in that little slit and then does not feed right to the bobbin. So, I just file it down.
#12
I use a wooden skewer to guide the fabric under the presser foot. if the needle hits the wooden skewer it probably won't break, but if it hits something metal it will break and may cause your machine to have to go to the shop to have a repair job done on it.
I use Elmer's School Glue and Crayola Washable Markers. I have board clamps from Home Depot that I have used to keep my thread stand on the sewing table. I use shelf liner (the rubbery kind) under my foot pedal and under my thread stand.
I have an organizer designed for stamping that I use to hold all my notions - so I just grab it when I go to Bee.
I have 2 yard sticks taped together with blue painters tape to use as a guide when long arm quilting a grid.
I have found that one must have an open mind when it comes to sewing and utilize whatever works.
I use Elmer's School Glue and Crayola Washable Markers. I have board clamps from Home Depot that I have used to keep my thread stand on the sewing table. I use shelf liner (the rubbery kind) under my foot pedal and under my thread stand.
I have an organizer designed for stamping that I use to hold all my notions - so I just grab it when I go to Bee.
I have 2 yard sticks taped together with blue painters tape to use as a guide when long arm quilting a grid.
I have found that one must have an open mind when it comes to sewing and utilize whatever works.
#13
Junior Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 218
I use rubberized shelf covering to do my FMQ. I cut it into squares and just lay it on the quilt under my hands. I can move the quilt around easily and my hands are free (not having to remove gloves) to remove pins, etc as I quilt.
#14
Junior Member
Join Date: Jan 2012
Location: Wisconsin
Posts: 292
I use pipe cleaners to get fuzz out of the bobbin area. Problem is most clerks do not know what they are!. I found that chenille is the term to look for and I found the primarily in the toy area or craft section. They bend nicely to fit into small spaces as well.
#15
Super Member
Join Date: Aug 2010
Location: Slidell, Louisiana
Posts: 6,951
I use these also, they do work great! Also, if you need to reach farther, you can fold a piece and stick it into the end of a straw! Not my idea, saw it somewhere on the internet, just passing it on!
#16
I use one of those plastic scrubbies on a handle that are used to scour sinks or to scrub potatoes, to clean my cutting map. It picks up all kinds of debris.
Buy those 4 inch long toothpick-like skewers at the grocery, tape them to the short spindles on my wooden thread rack and now I can add the bobbin to the thread spool, keeping both together.
And those wonderful lint rollers are so great for cleaning up the floor around the machine and getting all the threads off my flannel sheet hung up to display blocks (can't remember what we call it....).
Buy those 4 inch long toothpick-like skewers at the grocery, tape them to the short spindles on my wooden thread rack and now I can add the bobbin to the thread spool, keeping both together.
And those wonderful lint rollers are so great for cleaning up the floor around the machine and getting all the threads off my flannel sheet hung up to display blocks (can't remember what we call it....).
#18
Power Poster
Join Date: Mar 2013
Location: Corpus Christi, Tx.
Posts: 16,105
I keep my yard stick nearby and with a clamp am able to clamp a magnet on the end to reach those spaces where they are just far enough out of reach. I have a few magnetic bowls from Harbor Freight and dropped a bunch of pins clamped a bowl to the yard stick and got all the pins back into the bowl. That is their place of rest from now on. The clamps are called Frog clamps and work great for larger items. These pins really scattered and didn't pick up any dust.
#20
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,481
I found this handy little lighter leash at the checkout a while back. It has the little retractable string for using your lighter while the hook is attached to your purse or belt loop.
I use it on a pair of scissors by my sewing machine. I have spot I hook it on my table and I can use the scissors and then they zip back to hang for next time. I also like to bring it along for hand work and clip it on my purse. Love it!
[ATTACH=CONFIG]526002[/ATTACH]
I use it on a pair of scissors by my sewing machine. I have spot I hook it on my table and I can use the scissors and then they zip back to hang for next time. I also like to bring it along for hand work and clip it on my purse. Love it!
[ATTACH=CONFIG]526002[/ATTACH]
Thread
Thread Starter
Forum
Replies
Last Post