Go Back  Quiltingboard Forums >
  • Main
  • Can anyone identify this method of binding?? >
  • Can anyone identify this method of binding??

  • Can anyone identify this method of binding??

    Thread Tools
     
    Old 09-06-2019, 03:39 AM
      #11  
    Power Poster
     
    Join Date: Jan 2011
    Location: Southern USA
    Posts: 16,074
    Default

    I've done facing a lot and I never had the seam line showing at the edge like this one has.
    Onebyone is offline  
    Old 09-06-2019, 03:42 AM
      #12  
    Super Member
     
    Join Date: Apr 2007
    Location: Alturas, CA
    Posts: 9,393
    Default

    I think it's called a knife edge finish.
    pocoellie is offline  
    Old 09-06-2019, 03:52 AM
      #13  
    Power Poster
     
    Join Date: May 2009
    Location: NY
    Posts: 10,590
    Default

    This is not faced. Facing has a large strip of fabric added and folded to the back. Like this: https://thesillyboodilly.blogspot.co...y-to-face.html

    This little mug rug has a "knife edge" finish. This can be achieved a few different ways. One way is to birth it before quilting as tesspug wrote. Then the piece was top stitched. I did the same thing on this little hexie table topper. Hexagons

    This method is best for small pieces like mug rugs, placemants, table toppers, etc. Anything bigger it gets dicey in the quilting process and you are likely to get pleats and tucks in the quilting.

    The other way this can be done is a traditional knife edge where you turn under the backing and top 1/4" and top stitch or hand stitch closed, this was top stitched. There are loads of tutes out there and here is a link to Dread Pirate Rodgers pdf file that explains a lot of different ways to finish a quilt.
    http://piraterodgers.com/tutorials/a...nishes/AF1.pdf
    feline fanatic is offline  
    Old 09-06-2019, 04:54 AM
      #14  
    Power Poster
     
    Annaquilts's Avatar
     
    Join Date: Jul 2010
    Location: SoCal
    Posts: 11,917
    Default

    Facing binding but instead of sewing the strips to the front and folding back it is sewn to the back and folded to the front.

    it is like in this link shared earlier on in the post except the facing is folded to the front.
    https://serendipitypatchwork.com.au/...facing-finish/

    Last edited by Annaquilts; 09-06-2019 at 04:56 AM.
    Annaquilts is online now  
    Old 09-06-2019, 06:54 AM
      #15  
    Power Poster
     
    Join Date: May 2008
    Location: MN
    Posts: 24,476
    Default

    I am tending to think the narrow pink borders were sewn on to the "top" like any other borders -
    then it was "birthed" and top-stitched along the inside and outside edges of the narrow border.
    bearisgray is offline  
    Old 09-06-2019, 07:08 AM
      #16  
    Super Member
     
    Join Date: Aug 2018
    Location: Greater Peoria, IL -- just moved!
    Posts: 6,127
    Default

    I did "butt joints" using bias/straight binding for a couple of decades before I switched to the mitered corner technique. I found they held up well to washing and use, but decided to switch to the show entry technique because I might as well...

    Typically you do the long sides first, you leave the ends raw because you will sew over them. Pin on short sides and sew, then flip inside out and and sew (with tiny stitches!) the binding. Grade cut the ends to minimize bulk and flip right side out.

    I never did the stitching along the outside edge, think I could with something small. I did try stitching down the binding by machine but I'm happiest with the results I get doing the blind stitch finish by hand even though I'm really slow.

    Edit: I do think this was birthed, I see no evidence of seaming on the back. Two sided bindings can be done and is a fun finish for some projects, especially if it has two "right" sides.

    Last edited by Iceblossom; 09-06-2019 at 07:19 AM.
    Iceblossom is offline  
    Old 09-06-2019, 07:12 AM
      #17  
    Super Member
     
    Join Date: May 2008
    Location: Colorado
    Posts: 1,184
    Default

    Originally Posted by Nonnie4
    I received a lovely mug rug in a recent swap and loved the binding method. It does not have mitered corners which tend to give me trouble. I asked my swap partner what it was called so that I could possibly find a tutorial online but she did not remember what it was called. So I am throwing it out for all you "experts". You can see that the binding does not wrap to the back. Any thoughts?
    [ATTACH=CONFIG]617076[/ATTACH][ATTACH=CONFIG]617077[/ATTACH][HR][/HR]
    This is a Double Sided Binding. Very easy to do. You are just using 2 pieces of fabric and put on like normal. I can post my handwritten directions in a bit.

    Last edited by Ellen 1; 09-06-2019 at 07:16 AM.
    Ellen 1 is offline  
    Old 09-06-2019, 07:14 AM
      #18  
    Super Member
     
    juliasb's Avatar
     
    Join Date: Jun 2010
    Location: Waterford Michigan
    Posts: 7,241
    Default

    It looks like something I have done when birthing a quilt. Works well on smaller quilting project but not so well on larger projects.
    juliasb is offline  
    Old 09-06-2019, 07:38 AM
      #19  
    Power Poster
     
    Join Date: May 2009
    Location: NY
    Posts: 10,590
    Default

    Originally Posted by Ellen 1
    This is a Double Sided Binding. Very easy to do. You are just using 2 pieces of fabric and put on like normal. I can post my handwritten directions in a bit.
    Nope, definitely not, look at the bit of backing that shows in the pic and the double seam lines of stitching, the printed design in the fabric matches up perfectly across the seam line, right down to the the double scroll exactly in the line of stitching. Even if someone took the time to make a binding to match perfectly there is no way they could duplicate that perfectly. This piece is not bound in any way it is finished with either a knife edge or birthing and then the maker machine stitched it closed, which is the stitching right next to the edge and then did a stitch right next to the ditch where the pink border meets the green and pink print on the front.

    Nonnie 4 can you tell us if the butting seams in the corners are stitched closed? Also can you post close up pics of the corners both front and back and holding it up so we can see the edge. These shots would confirm for me the method of construction used. But I am still thinking this was birthed, then quilted.
    feline fanatic is offline  
    Old 09-06-2019, 08:47 AM
      #20  
    Super Member
     
    Join Date: May 2008
    Location: Colorado
    Posts: 1,184
    Default

    Double Sided Binding-I learned this from watching Betty Cotton on a quilting program on TV many years ago. There is also a photo tutorial in the Quilters Newsletter, July/August 2007 (if you have saved back issues). :-). This is my notes from watching Betty Cotton (Cotton Theory). Hope this helps. Makes a great finish on a quilt!

    Hummmm....photos not very clear. If you want this I can PM it to you.
    Attached Thumbnails ba3012a6-ef64-46d8-b723-1ba2561e0de4.jpeg   09c425f1-c936-4446-8af1-b79fba573a14.jpeg  

    Last edited by Ellen 1; 09-06-2019 at 08:51 AM.
    Ellen 1 is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    thseabreze
    Pictures
    18
    04-30-2010 10:40 AM
    diogirl
    Main
    8
    09-27-2009 06:18 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter