Go Back  Quiltingboard Forums >
  • Main
  • machine quilting with flannel backing >
  • machine quilting with flannel backing

  • machine quilting with flannel backing

    Thread Tools
     
    Old 10-22-2010, 05:18 AM
      #21  
    Member
     
    shirlm's Avatar
     
    Join Date: Oct 2010
    Location: Louisiana
    Posts: 10
    Default

    Just put the label on a flannel backed baby quilt last night. Like others said: Bought good quality flannel, prewashed and dried, spray basted, walking foot, adjusted pressure and used larger stitch (approx 2.70). Results were quite nice. NOW I hope there's no more shrinkage or distortion when the quilt's washed!

    Shirley in Shreveport
    shirlm is offline  
    Old 10-22-2010, 06:02 AM
      #22  
    Super Member
     
    Join Date: Aug 2009
    Location: Illinois
    Posts: 1,809
    Default

    I, too, like flannel backs especially on quilts for "littles". The walking foot is almost a necessity. Usually I do stitch in the ditch to stabilize the blocks before doing any sort of decorative thing. (I wish they'd come out with a stitch in the ditch walking foot! Could really use that one.) I always start with the grain of the flannel on the straight and in the middle of the top or bottom working toward the sides with all of those stitching lines going the same direction. Then do the crosswise. When crossing those lines of stitching that were done on the straight, tug just a bit on the sandwich so it will stretch with the crosswise grain and work those puckers out. This will work on the little puckers, not excessive ones, which actually should not be there if you started out with the back perfectly flat. If you work on a table, try taping the back out so it is smooth when creating the sandwich. It sounds like your back may be sliding without you noticing.

    Salemm asked about using a flannel blanket as batting. I did that on one of my first quilts and wish I hadn't. It is one that was for my younger daughter and the blocks were all embroidered--a lot of work. I wish I'd used a traditional batt in that one. My opinion--depends on the use for the quilt. If it's for utility, good idea. If it's for a treasure, use a traditional batt. Flannel blankets work well for batting in a rag quilt as it is extra warmth and adds to the fringe.
    illinois is offline  
    Old 10-22-2010, 07:36 AM
      #23  
    Junior Member
     
    Grandma Libby's Avatar
     
    Join Date: Oct 2010
    Location: Virginia
    Posts: 269
    Default

    The first full quilt I did was flannel and it does stretch out as you go - I saw somewhere on one of the tv shows that you could spray sizing or starch to firm it up....maybe just try a section and see.
    Grandma Libby is offline  
    Old 10-22-2010, 07:53 AM
      #24  
    Junior Member
     
    BATIKQLTR's Avatar
     
    Join Date: Oct 2010
    Location: California
    Posts: 298
    Default

    I also back all my quilts with flannel. I wash and dry first (very improtant). Sometimes I will use iron on batting to help stabilize and I always use a lite spray baste (505). I smooth it down several times before I spray and I quilt on my old Kenmore with a longer stitch.

    Good Luck, I hope it works for you.
    BATIKQLTR is offline  
    Old 10-22-2010, 09:34 AM
      #25  
    Super Member
     
    Join Date: Jul 2010
    Location: Glenmoore, PA
    Posts: 7,941
    Default

    Originally Posted by illinois
    I, too, like flannel backs especially on quilts for "littles". The walking foot is almost a necessity. Usually I do stitch in the ditch to stabilize the blocks before doing any sort of decorative thing. (I wish they'd come out with a stitch in the ditch walking foot! Could really use that one.) I always start with the grain of the flannel on the straight and in the middle of the top or bottom working toward the sides with all of those stitching lines going the same direction. Then do the crosswise. When crossing those lines of stitching that were done on the straight, tug just a bit on the sandwich so it will stretch with the crosswise grain and work those puckers out. This will work on the little puckers, not excessive ones, which actually should not be there if you started out with the back perfectly flat. If you work on a table, try taping the back out so it is smooth when creating the sandwich. It sounds like your back may be sliding without you noticing.

    Salemm asked about using a flannel blanket as batting. I did that on one of my first quilts and wish I hadn't. It is one that was for my younger daughter and the blocks were all embroidered--a lot of work. I wish I'd used a traditional batt in that one. My opinion--depends on the use for the quilt. If it's for utility, good idea. If it's for a treasure, use a traditional batt. Flannel blankets work well for batting in a rag quilt as it is extra warmth and adds to the fringe.
    I have Husqvarna Vikings and they just came out with a new walking foot that has interchangeable feet, and one of them is a stitch-in-the-ditch foot. It is wonderful. Another is a 1/4" foot. I love it!
    grann of 6 is offline  
    Old 10-22-2010, 12:55 PM
      #26  
    Senior Member
     
    scrapykate's Avatar
     
    Join Date: Sep 2010
    Location: Virginia
    Posts: 707
    Default

    I had the same problem. I prewashed my flannel, then spray basted back, batting and top and also pinned it down. I took my walking foot off and guided with my hands and kept material between hands flat. That worked like a charm and I was quilting on the diagonal. Happy pinning
    Kate
    scrapykate is offline  
    Old 10-22-2010, 01:53 PM
      #27  
    Junior Member
     
    Join Date: Oct 2010
    Location: So. California
    Posts: 134
    Default

    Wish I'd known about all this 3 days ago!!! :D good thing it was a small lap quilt for Christmas :D
    AmyBaby is offline  
    Old 10-22-2010, 01:56 PM
      #28  
    Power Poster
     
    Join Date: Nov 2009
    Location: Mableton, GA
    Posts: 11,230
    Default

    I just finished a baby quilt backed in flannel. I washed and dried the flannel twice. I didn't starch, pin basted and FMQ it. Came out fine. The only problems are with me and my abilities, not with the flannel!
    Stitchnripper is offline  
    Old 10-22-2010, 02:58 PM
      #29  
    Junior Member
     
    Join Date: Jun 2010
    Location: Poconos, PA
    Posts: 125
    Default

    I have made two lap quilts and one baby quilt with flannel backing and have never washed any flannel beforehand. I quilted in the ditch, however, I did use a LOT of basting spray on the flannel and batting as well as the top, pinned it very well, used the walking foot and bigger stitches, and very carefully worked it seam by seam while checking the back often for any puckering. It took a while and washed beautifully. It think if you machine quilt without too large areas of no quilting, the flannel should work out well without washing first. It has worked for me.
    Late Bloomer is offline  
    Old 10-22-2010, 03:13 PM
      #30  
    Power Poster
     
    Join Date: Nov 2009
    Location: Mableton, GA
    Posts: 11,230
    Default

    I think I might try not washing next time just to see the result i get.
    Stitchnripper is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Irishrose2
    Main
    11
    06-19-2017 10:26 AM
    Silver Needle
    Main
    5
    08-22-2013 06:39 AM
    JJean
    Main
    5
    02-28-2012 02:21 PM
    KimS
    Links and Resources
    5
    01-18-2012 05:26 PM
    Butterflyblue
    Main
    4
    01-25-2011 12:54 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter