Upper Tension adjustment/cleaning on 1917 White Rotary Treadle Machine
#1
Senior Member
Thread Starter
Join Date: Jun 2011
Location: Orlando, FL
Posts: 416
Upper Tension adjustment/cleaning on 1917 White Rotary Treadle Machine
The tension is currently correct when sewing on quilting cotton. However, the upper tension dial is almost at its loosest setting. I would think that 'normal' should be some where in the middle.
If I set the tension dial to a higher number, it is almost impossible to pull the thread through the tension mechanism even with the presser foot up. Maybe the tension disks need cleaning but how would I do that? This tension mechanism is very different from my more modern Pfaff and Juki. Those actually have 2 disks which I run floss or a pipe cleaner through in order to clean.
I am not sure how to clean this one.
If I set the tension dial to a higher number, it is almost impossible to pull the thread through the tension mechanism even with the presser foot up. Maybe the tension disks need cleaning but how would I do that? This tension mechanism is very different from my more modern Pfaff and Juki. Those actually have 2 disks which I run floss or a pipe cleaner through in order to clean.
I am not sure how to clean this one.
Thread
Thread Starter
Forum
Replies
Last Post
riutzelj
For Vintage & Antique Machine Enthusiasts
2
07-07-2012 08:48 AM
lakekids
For Vintage & Antique Machine Enthusiasts
4
07-03-2012 03:16 PM
ArizonaKAT
For Vintage & Antique Machine Enthusiasts
5
03-02-2012 09:36 AM