Cleaning and repairing the Shellac clear coat on Vintage sewing machine heads
#431
Glenn also mentions that after you get several coats on that you can start to use a little less oil with the shellac. The 201 I'm working on is getting very shiny finally but after a lot of coats and a few do overs.
#432
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Understanding is more important than anything on this technique. Don't start it unless you do understand.
#433
And even once you think you understand it, it will take time to get the feel for the chemicals and to recognize what happened if or when something unplanned happens. I'm very glad I started on a machine I didn't care about. I'm less pleased with myself for bonding with said machine during this process because now I feel like I have more invested in it. :-/.
#434
Super Member
Thread Starter
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Skip
#437
Member
Join Date: Oct 2014
Posts: 12
I've read 33 pages of this thread. I did find a place where the French polish is defined: Post #110.
I certainly have learned a lot by reading the posts but I've also read some posts that contain additional steps or contradicting information and it's starting to confuse me.
I have read both that there is a waiting period after using the Naptha, but I have also read a Post somewhere that one doesn't have to wait after using the Naptha.
I thought I understood the order of steps from the Glenn's first posts but then I read in later posts that there is a step involving denatured alcohol and shellac. I don't understand what situations should an alcohol/shellac step be used.
As I understand there is a step using denatured alcohol with a drop or two of linseed oil to soften the original shellac, then painting touch ups, then the French polishing with shellac and a drop or two of linseed oil. Not sure where/why the alcohol/shellac step comes into play.
Can someone describe when there should be a waiting period?
Any clarification would be appreciated.
I certainly have learned a lot by reading the posts but I've also read some posts that contain additional steps or contradicting information and it's starting to confuse me.
I have read both that there is a waiting period after using the Naptha, but I have also read a Post somewhere that one doesn't have to wait after using the Naptha.
I thought I understood the order of steps from the Glenn's first posts but then I read in later posts that there is a step involving denatured alcohol and shellac. I don't understand what situations should an alcohol/shellac step be used.
As I understand there is a step using denatured alcohol with a drop or two of linseed oil to soften the original shellac, then painting touch ups, then the French polishing with shellac and a drop or two of linseed oil. Not sure where/why the alcohol/shellac step comes into play.
Can someone describe when there should be a waiting period?
Any clarification would be appreciated.
#439
I received my aniline black dye yesterday.....I had to order it online. I'm ready to get started sprucing up the Red Eye 66 I posted earlier. But I think I will practice a bit. Sounds like a good idea. I have a Singer 9W (Wilson and Wheeler previously) that needs TLC, I think this is it's time.
I'm so glad there is support for this process. I'm having fun. So far!
I'm so glad there is support for this process. I'm having fun. So far!
#440
Thank you for the great information. I think I will have to wait until summer to do this as it is snowing and 30 degrees out now.Maybe May will be more like it. I just inherited a trainwreck Singer treadle I believe it's a 1919, the Model number is G6981522
Thanks again,
Dawn 227 in Chilly Rochester NY
Thanks again,
Dawn 227 in Chilly Rochester NY
Thread
Thread Starter
Forum
Replies
Last Post
Glenn
For Vintage & Antique Machine Enthusiasts
105
06-17-2023 07:05 AM
smokeythecat
For Vintage & Antique Machine Enthusiasts
3
03-22-2018 11:58 AM
Redsquirrel
For Vintage & Antique Machine Enthusiasts
3
10-12-2014 09:00 AM
Glenn
For Vintage & Antique Machine Enthusiasts
35
07-03-2014 08:44 PM