What thread to hand stitch a binding, and why?
#13
Super Member
Join Date: Mar 2013
Location: Texas
Posts: 1,198
I prefer cotton thread and usually use a color closest to the binding. I use the same thread that I piece with, which is 50 weight/3 ply. I use the same stitch to sew the binding that I use to applique, so the stitches "disappear" into the fabric.
#14
Well, I'm intrigued by the silk idea "ckcowl", I will have to try that!
I've also had cotton bindings actually snap in the wash on a large, heavy quilt. I then tried cotton wrapped poly...tends to separate while hand stitching, very frustrating. The latest I've tried is Fil-tec poly wrapped poly run thru some thread heaven..working great so far and I'm almost finished with a ginormous king!!!
I've also had cotton bindings actually snap in the wash on a large, heavy quilt. I then tried cotton wrapped poly...tends to separate while hand stitching, very frustrating. The latest I've tried is Fil-tec poly wrapped poly run thru some thread heaven..working great so far and I'm almost finished with a ginormous king!!!
#15
Super Member
Join Date: Mar 2011
Location: East Tennessee
Posts: 1,053
I color match, often use polyester and frequently use what's left of the thread on the bobbin of my long-arm when I finish a quilt. Polyester doesn't wear out cotton fabric. I just believe that's an urban myth. So, for the sake of invisibility, fine and color matched are my checkpoints. The thread also needs to be strong. You don't want any breakage here and the binding of a quilt takes more stress than any other part.
#17
Well, I'm intrigued by the silk idea "ckcowl", I will have to try that!
I've also had cotton bindings actually snap in the wash on a large, heavy quilt. I then tried cotton wrapped poly...tends to separate while hand stitching, very frustrating. The latest I've tried is Fil-tec poly wrapped poly run thru some thread heaven..working great so far and I'm almost finished with a ginormous king!!!
I've also had cotton bindings actually snap in the wash on a large, heavy quilt. I then tried cotton wrapped poly...tends to separate while hand stitching, very frustrating. The latest I've tried is Fil-tec poly wrapped poly run thru some thread heaven..working great so far and I'm almost finished with a ginormous king!!!
Thanks for the advice, omaluvs2quilt. I'm working on a king sized quilt, my first king, and I was wondering if cotton thread (which I've used in the past) would hold up on this monster. I just found a 50# polyester (So Fine) that matches, and will use that. The silk doesn't have a matching color, too bad, but the So Fine comes highly recommended from my quilt shop.
Thank you everyone for your input! I think what I'm hearing is that on smaller quilts, a good, strong cotton would do nicely, or whatever matches in some kind of poly. I also learned that ease of use is very important while hand sewing, as several of you commented that you like the "feel" of the thread and how well it worked. And for bigger quilts, I need to make sure the thread is strong enough to hold.
Thanks again everyone!
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
3
12-25-2010 09:49 PM