My rotary cutter causing my back problems, ugh!
#1
Senior Member
Thread Starter
Join Date: Mar 2013
Location: Mission Viejo, CA
Posts: 832
My rotary cutter causing my back problems, ugh!
I have been noticing that on the days that I am able to sew my back starts spasming. So to test my theory I used sisscors to do my cutting instead of my rotary blade cutter. Seems the pushing motion is aggreviating it. (sorry I can't spell today) Anyone have any tips for me on how to position my body so this doesn't happen???
#4
I agree that the height of the cutting table is very important. Some people prefer to sit while using the rotary cutter. You might try that out. Also be sure your blade is sharp and your mat is in good shape so you don't have to press as hard.
#5
Super Member
Join Date: Jun 2010
Location: England Alton Towers
Posts: 6,673
Highering a table may help or learning to cut sitting down. Have you also tried the rotary cutter set with a bend for ease on cutting. The cutting slicer may also help. Have a look around or if your son in law is so helpful train him to cut he fabric for you.
#6
Super Member
Join Date: Mar 2011
Location: Northern Indiana
Posts: 2,679
I bought that new ironing board cabinet that JoAnn's had on sale last month. It's just a couple on inches higher than the table that I have allways used for cutting. Used the cabinet one day to cut a bunch of material and I could tell the difference in my back. So I'm going to get some kind of risers put under my table.
#7
Super Member
Join Date: Jun 2011
Location: Michigan. . .FINALLY!!!!
Posts: 6,726
Get an anti fatigue mat to put on the floor in front of your cutting table. This has really helped me. I got mine at Meijer and it is the thick black one that you can put in your kitchen. I also have one that I got at Menards that is about 5 feet long and it is on the floor in front of my ironing board. The height of your cutting table is also important.
#8
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,538
I have shoulder problems and too much rotary cutting can be painful. I space my cutting with sewing and ironing. There are other cutting systems that might help. There are the rulers that have a rail that the rotary cutter rides in to prevent slipping so you don't have to press as hard. Definitely check to see if raising or lowering your cutting surface helps.
#9
Thread
Thread Starter
Forum
Replies
Last Post