Go Back  Quiltingboard Forums >
  • Main
  • Red Snapper ?? >
  • Red Snapper ??

  • Red Snapper ??

    Thread Tools
     
    Old 11-26-2016, 04:18 AM
      #1  
    Senior Member
    Thread Starter
     
    SandySews's Avatar
     
    Join Date: Aug 2011
    Location: West Virginia
    Posts: 462
    Default Red Snapper ??

    Wondering if any of you have the Red Snapper loading system for your long arm??
    Do you like using it better than pinning?
    Is it worth what you paid for it?
    Where did you purchase it and what did it cost?
    If you use a different loading system what kind and how much was it?
    Does anyone ever put these things on Sale?

    Many thanks in advance....
    SandySews is offline  
    Old 11-26-2016, 04:30 AM
      #2  
    Junior Member
     
    glassnquilts's Avatar
     
    Join Date: Nov 2010
    Location: Georgia
    Posts: 258
    Default

    I love my Red Snappers. It is so much quicker and less painful than pinning. I think it takes some hand strength when you start. They loosen up but are stiff at first. That is something to consider if you have hand weakness. I use them on the backing. I lightly pin the top at the top edge and float the bottom of it. I would definitely recommend them. I have had them several years so I cannot remember exactly how I bought them. I think I went through the maker's website.
    glassnquilts is offline  
    Old 11-26-2016, 05:25 AM
      #3  
    Power Poster
     
    Join Date: Dec 2010
    Location: Michigan
    Posts: 11,276
    Default

    I also purchased them thru the website (Renae Hadden???). As glassnquilts mentions, they can be a bit stiff, especially if they are cold. I always use them on the take up roller. I can use the table that you lay your pantographs on to apply the clamp strip. I also cut one of the clamping strips into 1.5 to 2 inch pieces and sometimes use the short pieces instead of the long one. Because I'm applying the clamp on a table, it's easy to get the top of the backing on straight. The bottom, not so much. I have a hard time getting the clamp on without the table and keeping the backing even. I eventually removed the rod from the bottom leader and just pin that. Just using it on one of the leaders still saves me a bunch of time. I think Nancy's Notions carries them, so with a coupon or site wide sale you can get them a bit lower. If you use the search option above and search this site, you can find posts where folks have developed home grown versions using inexpensive materials from the hardware store.

    Last edited by PaperPrincess; 11-26-2016 at 05:29 AM.
    PaperPrincess is offline  
    Old 11-26-2016, 05:30 AM
      #4  
    Power Poster
     
    Join Date: Feb 2009
    Location: Northern Michigan
    Posts: 12,861
    Default

    I love my red snappers! So much faster than pinning was. I purchased mine from my machine dealer when I upgraded/ bought my new longarm
    ckcowl is offline  
    Old 11-26-2016, 05:32 AM
      #5  
    Senior Member
     
    Join Date: Oct 2013
    Posts: 673
    Default

    I paid $79 for a set. I tried them for awhile but ended up selling them. I couldn't push hard enough and it felt like I needed 3 hands. So it felt like I couldn't get the quilt on accurately.
    I know people who swear by them. I was swearing at them.
    sval is offline  
    Old 11-26-2016, 05:35 AM
      #6  
    Super Member
     
    Join Date: Feb 2013
    Posts: 2,657
    Default

    Ditto on what everyone says. I love my red snappers, so much easier, especially after they get limbered up. Some people say to use a hair dryer to make them more pliable at first. Got mine from my dealer the same time I got my LA.
    Misty's Mom is offline  
    Old 11-26-2016, 07:27 AM
      #7  
    Super Member
     
    soccertxi's Avatar
     
    Join Date: May 2010
    Posts: 1,658
    Default

    I think my Red Snappers are the best add-on I have gotten for my frame! I let my first set go when I sold my Gammill and had another set ordered before the Innova was delivered! They can be a bit snug when you first get them, but they loosen up with use. I use the heel of my hand against the belly bar as I don't have as much hand strength as I used to. Renee Haddadin is the inventor/dealer and you can find her at http://www.quiltsonthecorner.com/
    soccertxi is offline  
    Old 11-26-2016, 07:48 AM
      #8  
    Super Member
     
    GEMRM's Avatar
     
    Join Date: Nov 2011
    Location: South West Ontario
    Posts: 2,237
    Default

    I have the "Leadergrip" system, very similar to the Red Snapper system. I really like them and wouldn't do without them.
    As noted by others, the grip part is a little stiff at first, but what I did was buy a length of dowelling and put the lengths of gripper on them to slightly stretch them out a bit before using - that really helped to make them easier to put on. I just put a length on the dowelling and left it for a few days before I wanted to use it. After awhile, I'd managed to use the dowelling on all the rods.
    GEMRM is offline  
    Old 11-26-2016, 08:31 AM
      #9  
    Power Poster
     
    Annaquilts's Avatar
     
    Join Date: Jul 2010
    Location: SoCal
    Posts: 12,022
    Thumbs up

    Originally Posted by SandySews
    Wondering if any of you have the Red Snapper loading system for your long arm??
    Do you like using it better than pinning?
    Is it worth what you paid for it?
    Where did you purchase it and what did it cost?
    If you use a different loading system what kind and how much was it?
    Does anyone ever put these things on Sale?

    Many thanks in advance....
    I use red snappers always with my Innova. Yes, they are sometimes hard to push on especially if you have medical issues making it harder. Put the tiny snappers on first, keeping your top in place. Then put on the longer one and remove the tiny ones as you do. I put the longer snappers on starting and one end working over step by step to the other end. I have also pinned and used zippers on other people's longarms. If I would not use red snappers I would use zippers, I think. I bought them with my longarm from my dealer.

    Last edited by Annaquilts; 11-26-2016 at 08:36 AM.
    Annaquilts is online now  
    Old 11-26-2016, 10:16 AM
      #10  
    Super Member
     
    Join Date: Nov 2009
    Location: Ontario, Canada
    Posts: 1,991
    Default

    I have Leadergrips (very similar) and absolutely love them. I can't imagine having to pin my backing. The Leadergrips are easy to use, very fast and hold my quilt backing steady and secure. A set was $80 Canadian and worth every penny!
    Shelbie is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    scrappy happy
    Main
    40
    07-20-2014 01:02 PM
    guntherquilter
    Main
    29
    07-01-2014 12:27 PM
    cindi
    Main
    25
    08-24-2013 04:53 AM
    AudreyB
    Main
    9
    06-19-2011 07:11 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter