Feather echo done
12-04-2019, 07:53 AM
#1
Power Poster
Thread Starter
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,462
Feather echo done
[ATTACH=CONFIG]620492[/ATTACH]It went pretty fast with my walking foot and my knee lift to reposition. Is it perfect? No but if I wanted perfect,I would get a computer longarm and not use my Bernina 440 . Now to trim, get the binding on and finish.
12-04-2019, 08:00 AM
#2
Power Poster
Thread Starter
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,462
For those who wanted to know how I did my feather border. I used an old hand quilting stencil and chalked the feather loops and then FMQ in the left side first. I then did the right side of the feather. As you can see by the stencil, it had double straight lines but I wanted something more organic. I moved the sides closer together allowing just enough room to quilt in the spines on the third FMQ up the center. The scalloped echo I cut a template out of card stock that I used the stencil feather edge to get the spacing to match the feathers. [ATTACH=CONFIG]620493[/ATTACH]
Thread
Thread Starter
Forum
Replies
Last Post
