How to Outline Quilt Around Applique
01-05-2026, 07:51 AM
#1
Member
Thread Starter
Join Date: Jan 2023
Posts: 80
How to Outline Quilt Around Applique
I have been working on a quilt with quite a bit of turned-edge applique. I am almost ready to start quilting, and I would like to quilt a 1/8" outline around all the applique. However, I'm not quite sure how to mark or quilt such a narrow line, especially around curved and irregular shaped appliques.
Can anybody please share their preferred method, both for marking/measuring the 1/8" distance to quilt, and what method you use to actually sew the 1/8"?
Any help would be appreciated so much! Thanks!
Can anybody please share their preferred method, both for marking/measuring the 1/8" distance to quilt, and what method you use to actually sew the 1/8"?
Any help would be appreciated so much! Thanks!
01-05-2026, 11:11 AM
#2
Junior Member
Join Date: Oct 2020
Location: Virginia
Posts: 295
Are you wanting to hand quilt or machine quilt? I do hand quilting of my applique, especially Hawaiian quilts. I'm probably a little more casual about my approach to this than others would be, but I just eyeball the width I want, no marking. As a quilter, you're probably good at eyeballing a quarter inch. Just guesstimate half of that, and there you go.
01-05-2026, 11:43 AM
#3
Super Member
Join Date: Jan 2013
Posts: 1,152
Domestic or longarm quilting?
Domestic, there's sometimes a plastic foot for the free motion/hopping foot that looks like a target (concentric red circles on a clear circular foot).
Longarm - some manufacturers sell echo feet of different diameters - same idea, you use lines on the foot to try and guide around applique or echo previous stiching.
You don't mark the quilt - you use the edge of the applique as a visual guide for the foot as you quilt.
Domestic, there's sometimes a plastic foot for the free motion/hopping foot that looks like a target (concentric red circles on a clear circular foot).
Longarm - some manufacturers sell echo feet of different diameters - same idea, you use lines on the foot to try and guide around applique or echo previous stiching.
You don't mark the quilt - you use the edge of the applique as a visual guide for the foot as you quilt.
01-05-2026, 01:03 PM
#4
Member
Thread Starter
Join Date: Jan 2023
Posts: 80
Sorry, I'm using a domestic machine. I have the clear foot with the round ring guide lines, but I can't seem to find the right spot on the round ring to focus on. As the shape of the applique changes, I lose track of where on the guide lines I should be looking at. I haven't found a tutorial on this- probably because it should be obvious!
Thanks for your help!
Thanks for your help!
01-05-2026, 03:42 PM
#5
Super Member
Join Date: Jan 2013
Posts: 1,152
Short of that, if you've got someone who could modify a second clear foot (toe) to be that 1/8" (grind it down) all around, kind of like a mini clear foot, then again, train yourself to watch the edge of the foot relative to the edge of the applique'.
I know it's hard - we want to watch the needle. But with echoing, you need to watch the foot and the thing you're echoing instead of watching the needle.
01-05-2026, 04:10 PM
#7
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 18,340
Sorry, I'm using a domestic machine. I have the clear foot with the round ring guide lines, but I can't seem to find the right spot on the round ring to focus on. As the shape of the applique changes, I lose track of where on the guide lines I should be looking at. I haven't found a tutorial on this- probably because it should be obvious!
Thanks for your help!
Thanks for your help!
... are you FMQing? or straight line quilting?
Mentioning the circle foot with the lines, I am thinking you are doing FMQing.
I know what you mean about the round ring guide lines ... I used to find they pretty much made me cross-eyed!
You might want to inquire if there are any other feet available for your machine, that might make it easier. One that I have seen there are no lines, and you use the outside edge of the circle/foot up against where you want to quilt, with the distance to the needle being the constant. Different plastic circle sizes to give the different distances. For the 1/8", maybe you could use the inside of the plastic circle to the needle as your guide.
To get more comfortable with what you are doing, you might want to just try doing it on a sample sandwich. Maybe a small quilt, to make it useful!
Good Luck!
01-05-2026, 05:07 PM
#8
Member
Thread Starter
Join Date: Jan 2023
Posts: 80
Now that we know it's DSM, then another question that might help ...
... are you FMQing? or straight line quilting?
Mentioning the circle foot with the lines, I am thinking you are doing FMQing.
I know what you mean about the round ring guide lines ... I used to find they pretty much made me cross-eyed!
You might want to inquire if there are any other feet available for your machine, that might make it easier. One that I have seen there are no lines, and you use the outside edge of the circle/foot up against where you want to quilt, with the distance to the needle being the constant. Different plastic circle sizes to give the different distances. For the 1/8", maybe you could use the inside of the plastic circle to the needle as your guide.
To get more comfortable with what you are doing, you might want to just try doing it on a sample sandwich. Maybe a small quilt, to make it useful!
Good Luck!
... are you FMQing? or straight line quilting?
Mentioning the circle foot with the lines, I am thinking you are doing FMQing.
I know what you mean about the round ring guide lines ... I used to find they pretty much made me cross-eyed!
You might want to inquire if there are any other feet available for your machine, that might make it easier. One that I have seen there are no lines, and you use the outside edge of the circle/foot up against where you want to quilt, with the distance to the needle being the constant. Different plastic circle sizes to give the different distances. For the 1/8", maybe you could use the inside of the plastic circle to the needle as your guide.
To get more comfortable with what you are doing, you might want to just try doing it on a sample sandwich. Maybe a small quilt, to make it useful!
Good Luck!
I originally wanted to do straight line quilting, because FMQ is a struggle for me. However, I couldn't find a foot (Bernina 770) that had a clear enough 1/8" line that I felt I could use to quilt around curves and other irregular shapes. That's when I decided I better give thought to learning enough FMQ to do the outline quilting, but I seem to have the same issue. The underlying issue is user error and/or lack of information on how outline quilting is usually done. Thanks for the information!
01-05-2026, 05:10 PM
#9
Member
Thread Starter
Join Date: Jan 2023
Posts: 80
01-05-2026, 05:16 PM
#10
Member
Thread Starter
Join Date: Jan 2023
Posts: 80
Maybe using a Sharpie on top to mark what corresponds to 1/8" from the needle, then using that line as a guide to the applique' edge? You'd basically have to make your own circle on the clear foot (and mark on TOP of the foot so the ink doesn't transfer to the quilt top. You have to train your eyes to follow that line and the applique edge, NOT where the needle is.
Short of that, if you've got someone who could modify a second clear foot (toe) to be that 1/8" (grind it down) all around, kind of like a mini clear foot, then again, train yourself to watch the edge of the foot relative to the edge of the applique'.
I know it's hard - we want to watch the needle. But with echoing, you need to watch the foot and the thing you're echoing instead of watching the needle.
Short of that, if you've got someone who could modify a second clear foot (toe) to be that 1/8" (grind it down) all around, kind of like a mini clear foot, then again, train yourself to watch the edge of the foot relative to the edge of the applique'.
I know it's hard - we want to watch the needle. But with echoing, you need to watch the foot and the thing you're echoing instead of watching the needle.
