Go Back  Quiltingboard Forums >
  • Main
  • Celebration Sampler (Shop Hop) question >
  • Celebration Sampler (Shop Hop) question

  • Celebration Sampler (Shop Hop) question

    Thread Tools
     
    Old 06-21-2011, 08:20 PM
      #1  
    Member
    Thread Starter
     
    cawsings's Avatar
     
    Join Date: Mar 2011
    Location: Missouri
    Posts: 40
    Default

    For those of you who have started piecing the blocks, what size are they turning out to be? Mine are all just about 9 inches...but I'm confused because the instructions say "finished size: 9 inches" I thought that means once it's all pieced together as a quilt top the block will be 9" (so it would measure 9.5 now if that were correct)

    I'm also struggling to get the half square triangles to match up with the cut squares and rectangles. (joining a hst square to a regular square...the hat squares seem to be too small). I'm using my 1/4 inch foot for everything. Any tips?

    Thanks in advance!
    cawsings is offline  
    Old 06-21-2011, 09:05 PM
      #2  
    Super Member
     
    carslo's Avatar
     
    Join Date: Nov 2010
    Location: soCal
    Posts: 1,495
    Default

    When there is a lot of pieces to sew together in a block - we were taught to use a scant 1/4 inch - a really scant 1/4 inch maybe be the cure.

    Janet
    carslo is offline  
    Old 06-21-2011, 09:07 PM
      #3  
    Super Member
     
    Airwick156's Avatar
     
    Join Date: Dec 2010
    Location: Grants Pass, Oregon
    Posts: 3,360
    Default

    I'm also struggling to get the half square triangles to match up with the cut squares and rectangles. And its driving me INSANE. I have 7 blocks finished and they are measuring at just a fraction over 9 inches too. I am wondering if its not an error in the pattern also. Hmmm. No matter what, I am going to finish this quilt even if I have to trim them all down to 9 inches.
    Airwick156 is offline  
    Old 06-22-2011, 04:54 AM
      #4  
    Super Member
     
    Join Date: Mar 2009
    Location: western Pa
    Posts: 4,569
    Default

    I'm doing the Farmer's Wife Sampler Quilt and the blocks are supposed to finish at 6 1/2". All mine have finished at 6 1/4" (except 1 or 2). I figure since they're all the same size I can adjust the sashing and border sizes to fit my blocks. If they were all different I'd be concerned. If yours are all the same, the quilt should work out just fine. Good luck!
    janRN is offline  
    Old 06-22-2011, 05:31 AM
      #5  
    Super Member
     
    Ripped on Scotch's Avatar
     
    Join Date: Apr 2010
    Location: Ontario Canada
    Posts: 1,328
    Default

    As long as they are all the same size you should be ok. If you want to you can add sashings to make the top larger when you have them all ready. Good luck. Can't wait to see the final result!
    Ripped on Scotch is offline  
    Old 06-22-2011, 06:43 AM
      #6  
    Member
    Thread Starter
     
    cawsings's Avatar
     
    Join Date: Mar 2011
    Location: Missouri
    Posts: 40
    Default

    Originally Posted by Airwick156
    I'm also struggling to get the half square triangles to match up with the cut squares and rectangles. And its driving me INSANE. I have 7 blocks finished and they are measuring at just a fraction over 9 inches too. I am wondering if its not an error in the pattern also. Hmmm. No matter what, I am going to finish this quilt even if I have to trim them all down to 9 inches.
    That's what I was thinking about doing too...I finished through the Dublin Chain last night and figured I would just square them up to 9 inches when it came time to put them together. I think since there's sashing between the blocks on the finished quilt, we'll be okay but since this is my first machine pieced one I was a little worried! (Maybe I was a little too ambitious...but other than that they're looking good)
    cawsings is offline  
    Old 06-22-2011, 09:32 AM
      #7  
    Super Member
     
    katyquilter's Avatar
     
    Join Date: Jun 2010
    Location: Midwest
    Posts: 1,370
    Default

    I've learned not to try the fabhopshop patterns too soon. They usually come out with some corrections before the end of the month. It usually takes me quite a while to get started anyway :D
    katyquilter is offline  
    Old 06-22-2011, 09:44 AM
      #8  
    Super Member
     
    brookemarie19's Avatar
     
    Join Date: Dec 2009
    Location: NY
    Posts: 1,501
    Default

    I have the patterns on the blocks but can't see anywhere how much of each fabric I would need. Has anyone been able to figure this out? Sorry to hijack your thread just anxious to start this also.
    brookemarie19 is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Airwick156
    Main
    13
    02-20-2012 09:51 PM
    SallyQ
    Main
    2
    10-04-2011 10:07 PM
    Ilovemydogs
    Main
    18
    08-04-2011 08:13 AM
    craftybear
    Offline Events, Announcements, Discussions
    3
    06-28-2011 04:04 PM
    mumtoliam
    Pictures
    24
    04-01-2009 03:05 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter