Ash

Hello everyone, i recently got out my sewing machine after roughly 7 months of not using it. I lost my needle clamp screw!!
Are there any alternatives to using one? Or any easy replacements?

Tartan

I can’t think of anything to replace the needle screw clamp. Anything that you think might fit, may strip the threads in the machine. I would look to a repair shop of your machine brand for a replacement or on the net.

pocoellie

I agree with Tartan.

Jennifer23

I agree - don't try to find a substitute unless you're willing to gamble your machine.

You should be able to buy one online for under $20 (max). If the machine is worth $20 for you, don't risk messing up the threads - a machine that can't hold a needle in is useless!

quiltedsunshine

Where I work, if you bring your machine to the shop, we just go through our loose screws and try a few thumb screws until we find the right one, and give it to you. Take it to the shop. I'll bet they have an extra that won't cost much.

selm

Try this link: https://www.sewingpartsonline.com/se...le+clamp+screw

luvstoquilt

I would go to the repair shop today!

Snooze2978

I lost my needle clamp screw at a quilt retreat but luckily someone had a spare for the same brand machine so I was saved that time. I decided then to make sure I had spares of such items like screws, needles, scissors, etc. so I'm not placed in that position again. I was amazed how expensive a little screw is though.....$10 and here I thought I was being generous paying her $10 for the screw she gave me.

Onebyone

Most all needle screws and pressure foot screws will fit all machines. I have used a an old Singer needle screw on a newer Janome. The pressure foot screw have different size heads but the threads are the same in most cases. The bigger the head some feet like a walking foot won't fit exactly right.

Jordan

Do you have a quilt shop or sewing machine shop near you? I think it would be best to try and have one of those shops help you out with the correct piece. Good luck to you