How to piece this flannel backing
07-25-2014, 06:01 PM
#1
Super Member
Thread Starter
Join Date: Aug 2013
Posts: 9,299
How to piece this flannel backing
I need just six more inches along the long side of the throw I'm making. The backing is a mottled yellow flannel that's only 44in wide. I have plenty but have never pieced a backing before. How should I do this. Would it look stupid to have just that 6x60 in piece running along the edge of the big (46x 60 ) piece? I'd like to use only flannel on the back, for comfort . This is a chemo quilt for a friend .
07-25-2014, 06:11 PM
#2
Super Member
Join Date: Oct 2013
Location: Tulsa, Ok
Posts: 4,582
Piecing the back will be fine. After it is quilted the seam won't be noticeable. Since you have two lengths of fabric you could always cut the backing in equal size pieces with the seam in the middle and use the leftovers for another project. Or if you have enough fabric left over from the front (or even other flannel fabric) you could add a vertical row of blocks down the back that coordinate with the front which would give you the last 6" width you need. I often add some blocks to my backs for interest.
07-25-2014, 06:41 PM
#4
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,481
How about adding a strip down the center of the backing and appliqué her name on it. Of course that would only work if you didn't have to densely quilt over them as they might be thick. You could also add a row of blocks from the front down the back center.
07-25-2014, 06:58 PM
#6
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
It really depends on the look you want. You could certainly just add a 6" strip to the side of the backing; no one but you will probably ever notice it after it's quilted! You could also add it in the center, between strips on each side. This is more symmetrical, but again probably no one but you will ever notice it.
If you have a contrasting piece of flannel that would go well with the yellow, you could use that for the 6" strip (no matter where you place it). That creates more drama in the back and is more of a "modern" technique. In this case the strip would definitely be noticed, but that is because it becomes a design element!
It is up to you whether you want the strip to be unobtrusive (the same flannel either on the side or down the middle will achieve this) or whether you want to use this as an opportunity to introduce another design element into the quilt.
Edit: To clearly answer your intial question, it would NOT look stupid to piece the backing in the manner you describe!
Edit2: When using flannel for a backing, it's a good idea to make your seams 1/2" (or more) wide and press them open before layering.
If you have a contrasting piece of flannel that would go well with the yellow, you could use that for the 6" strip (no matter where you place it). That creates more drama in the back and is more of a "modern" technique. In this case the strip would definitely be noticed, but that is because it becomes a design element!
It is up to you whether you want the strip to be unobtrusive (the same flannel either on the side or down the middle will achieve this) or whether you want to use this as an opportunity to introduce another design element into the quilt.
Edit: To clearly answer your intial question, it would NOT look stupid to piece the backing in the manner you describe!
Edit2: When using flannel for a backing, it's a good idea to make your seams 1/2" (or more) wide and press them open before layering.
Last edited by Prism99; 07-25-2014 at 07:00 PM.
07-25-2014, 07:23 PM
#7
Super Member
Join Date: Oct 2013
Location: Tulsa, Ok
Posts: 4,582
Sorry I wasn't very clear in my first response. One of my thoughts was that you don't have to do a 44"/6" ratio (50" width total) on the back. Since you have to piece it anyway, you could do two 25" pieces with the seam in the center. Or any combination to get your 50" total width. You are right in that flannel will feel softer and warmer against the skin than regular quilting cotton. So if you want to use all flannel on the back, you can either use all one type (pieced) or mix and match flannels for a more artistic back. Your recipient will love and appreciate whatever you do!! ;o)
07-25-2014, 07:30 PM
#8
Super Member
Thread Starter
Join Date: Aug 2013
Posts: 9,299
It really depends on the look you want. You could certainly just add a 6" strip to the side of the backing; no one but you will probably ever notice it after it's quilted! You could also add it in the center, between strips on each side. This is more symmetrical, but again probably no one but you will ever notice it.
If you have a contrasting piece of flannel that would go well with the yellow, you could use that for the 6" strip (no matter where you place it). That creates more drama in the back and is more of a "modern" technique. In this case the strip would definitely be noticed, but that is because it becomes a design element!
It is up to you whether you want the strip to be unobtrusive (the same flannel either on the side or down the middle will achieve this) or whether you want to use this as an opportunity to introduce another design element into the quilt.
Edit: To clearly answer your intial question, it would NOT look stupid to piece the backing in the manner you describe!
Edit2: When using flannel for a backing, it's a good idea to make your seams 1/2" (or more) wide and press them open before layering.
If you have a contrasting piece of flannel that would go well with the yellow, you could use that for the 6" strip (no matter where you place it). That creates more drama in the back and is more of a "modern" technique. In this case the strip would definitely be noticed, but that is because it becomes a design element!
It is up to you whether you want the strip to be unobtrusive (the same flannel either on the side or down the middle will achieve this) or whether you want to use this as an opportunity to introduce another design element into the quilt.
Edit: To clearly answer your intial question, it would NOT look stupid to piece the backing in the manner you describe!
Edit2: When using flannel for a backing, it's a good idea to make your seams 1/2" (or more) wide and press them open before layering.
07-25-2014, 07:38 PM
#9
Super Member
Thread Starter
Join Date: Aug 2013
Posts: 9,299
I don't have enough of another flannel in coordinated colors. I like the idea of a pieced design element on the back of some quilts, but for this I just want a soft, smooth as-seamless-as-possible all over backing. I'm also going to piece the extra section along the side so that no seams are near her port ( she can tuck the seamed side behind her on her "good" side when she's sitting up. I am going to suggest that her friends and family can sign their names on the flannel side, which will be closest to her heart.
07-25-2014, 07:52 PM
#10
Super Member
Thread Starter
Join Date: Aug 2013
Posts: 9,299
I can't believe I didn't think of the symmetrical look . Duh. I'm tired. But i read your idea in time and am now sewing it on symmetrically. Thanks . (Still smh)
Sorry I wasn't very clear in my first response. One of my thoughts was that you don't have to do a 44"/6" ratio (50" width total) on the back. Since you have to piece it anyway, you could do two 25" pieces with the seam in the center. Or any combination to get your 50" total width. You are right in that flannel will feel softer and warmer against the skin than regular quilting cotton. So if you want to use all flannel on the back, you can either use all one type (pieced) or mix and match flannels for a more artistic back. Your recipient will love and appreciate whatever you do!! ;o)
Thread
Thread Starter
Forum
Replies
Last Post
